[adam_c]

I posted this in the NCS Expert thread but I'm not sure how often people check and I'm really hoping stuff isn't fucking on my car

- - -
Alright my first coding adventure has failed and I don't know now, hoping someone can help as I can no longer do anything

Setup
bimmergeeks cable
bimmergeeks standard bmw tools
ncs expert using manipulation profile from bimmergeeks

Scenario
Wanted to code window roll up with fob

Steps
Loaded NCS Expert, chose "Manipulation" profile
Downloaded the trc file and modified the line KOMFORTSCHLIESSUNG_FB to aktiv
Saved the file as .MAN
Reloaded NCS Expert in coding mode, tried uploading the changes and...
Received the following error
https://www.e90post.com/forums/attac...7&d=1531275068


Exited out of NCS Expert
Tried reloading and reading loading the CAS module (or any module) and now receive this error)
https://www.e90post.com/forums/attac...8&d=1531275076


After everything, I also noticed that my VIN was off by 1 digit, should have ended in 2 but it ended in 1 inside of NCS Expert


If I open my TRC file in NCS Dummy, I'm also getting this error
[E] 20:24:23 An error occurred while reading "C:\NCSEXPER\WORK\FSW_PSW.TRC": Unresolved function keyword "CODIERUNG_ERFOLGT". Make sure chassis and module match those of the trace file.

[LMB335IS]

Originally Posted by adam_c

I posted this in the NCS Expert thread but I'm not sure how often people check and I'm really hoping stuff isn't fucking on my car

- - -
Alright my first coding adventure has failed and I don't know now, hoping someone can help as I can no longer do anything

Setup
bimmergeeks cable
bimmergeeks standard bmw tools
ncs expert using manipulation profile from bimmergeeks

Scenario
Wanted to code window roll up with fob

Steps
Loaded NCS Expert, chose "Manipulation" profile
Downloaded the trc file and modified the line KOMFORTSCHLIESSUNG_FB to aktiv
Saved the file as .MAN
Reloaded NCS Expert in coding mode, tried uploading the changes and...
Received the following error
https://www.e90post.com/forums/attac...7&d=1531275068


Exited out of NCS Expert
Tried reloading and reading loading the CAS module (or any module) and now receive this error)
https://www.e90post.com/forums/attac...8&d=1531275076


After everything, I also noticed that my VIN was off by 1 digit, should have ended in 2 but it ended in 1 inside of NCS Expert


If I open my TRC file in NCS Dummy, I'm also getting this error
[E] 20:24:23 An error occurred while reading "C:\NCSEXPER\WORK\FSW_PSW.TRC": Unresolved function keyword "CODIERUNG_ERFOLGT". Make sure chassis and module match those of the trace file.

If you have the bimmergeeks pkg you should have the coding tool. Follow along with this video I made a while back, just substitute CAS for KOMBI after you process ECUs.

[adam_c]

I think I managed to fix it using these steps

Originally Posted by acidbbg View Post
This is the correct guide..Thanks for the confirmation BMW..

1. Load NCSExpert.
2. Load Profile and select Expertmode
3. F1 (VIN/ZCS/FA)
4. F3 (ZCS/FA f .ECU)
5. Choose E89 (for the E9X)
6. Select CAS
7. F6 (BACK)
8. F4 (Process ECU)
9. Select the Module I want to Revert back to Stock.
10. F2->Choose "SG_Codieren->ok
11. F3->to start coding the ecu with factory settings according to the vehicle VO.

When I processed the ECU it gave me a different screen that I didn't see before but no more errors when connecting to the CAS module

[matteblue3er]

Originally Posted by adam_c

If I open my TRC file in NCS Dummy, I'm also getting this error
[E] 20:24:23 An error occurred while reading "C:\NCSEXPER\WORK\FSW_PSW.TRC": Unresolved function keyword "CODIERUNG_ERFOLGT". Make sure chassis and module match those of the trace file.

Empty your trace file and try it again