Anyone had this issue with a Genuine ICOM B NEXT before?

Pete.J · 09-03-2018, 12:34 PM

I recently bought a Genuine ICOM B Next to flash my CIC iDrive on an E92 335i, the LED next to MOST keeps flashing red, and I can't connect to the iDrive or any other module on the MOST ring.

When I try my old clone ICOM B (which is faulty btw, WinKfp flash keeps failing halfway), it connects fine, and I can connect to all modules on the MOST ring.

I am from Australia, and I bought that ICOM B from Schmiedmann in Denmark, Schmiedmann wants me to pay for shipping back to the EU, and they want me to go to a local BMW dealer to get a test report to prove that it's faulty! Absolutely atrocious customer service

I have to pay over $100 USD to get a refund from Schmiedmann for a faulty part, it's absolutely not my fault.

Pierre26, I read somewhere on here that you bought a new ICOM B from Schmiedmann, wondering if you've had any issues with it?

I was wondering if anyone else has had similar issues? And what tests can I do to confirm that it's a faulty ICOM B?

Or is there anyway I can attempt fixing it?

Some photos of the problem:

ptpending · 09-03-2018, 12:44 PM

icom next have problems with most and actia and bmw knew that but they didn't want to release firmware to fix that
actually you can try flash cic over ENET interfaces using icom next, may be it will work

09-03-2018, 12:34 PM	#1
Pete.J Lieutenant 366 Rep 572 Posts Drives: BMW M4 DCT (F82) Join Date: Jan 2012 Location: Melbourne iTrader: (0) Garage List 2015 BMW M4 [0.00] 2006 Honda Accord Euro [0.00]	Anyone had this issue with a Genuine ICOM B NEXT before? I recently bought a Genuine ICOM B Next to flash my CIC iDrive on an E92 335i, the LED next to MOST keeps flashing red, and I can't connect to the iDrive or any other module on the MOST ring. When I try my old clone ICOM B (which is faulty btw, WinKfp flash keeps failing halfway), it connects fine, and I can connect to all modules on the MOST ring. I am from Australia, and I bought that ICOM B from Schmiedmann in Denmark, Schmiedmann wants me to pay for shipping back to the EU, and they want me to go to a local BMW dealer to get a test report to prove that it's faulty! Absolutely atrocious customer service I have to pay over $100 USD to get a refund from Schmiedmann for a faulty part, it's absolutely not my fault. Pierre26, I read somewhere on here that you bought a new ICOM B from Schmiedmann, wondering if you've had any issues with it? I was wondering if anyone else has had similar issues? And what tests can I do to confirm that it's a faulty ICOM B? Or is there anyway I can attempt fixing it? Some photos of the problem: __________________ Current: F82 Mineral White M4 7DCT Gone but never forgotten: E92 Sparking Graphite 335i (N54) 6MT build thread. Last edited by Pete.J; 09-03-2018 at 12:43 PM..
	Appreciate 0 Tweet Quote

09-03-2018, 12:44 PM	#2
ptpending Brigadier General 616 Rep 3,153 Posts Drives: e81 Join Date: Dec 2013 Location: Poland iTrader: (1)	icom next have problems with most and actia and bmw knew that but they didn't want to release firmware to fix that actually you can try flash cic over ENET interfaces using icom next, may be it will work __________________ E81 2007 130i 6cylinder Montego blue Retrofits: Harman Kardon, High-beam assistant, Removable tow hitch. Auto-dim folding exterior mirrors. Lumbar support. Perfomance Brakes.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search