E90Post
 


Coby Wheel
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > Cosmetic and Lighting Modifications (exterior/interior) > Quality of Replica E92 LCI Tail Lights



Reply
 
Thread Tools Search this Thread
      09-07-2018, 08:11 PM   #1
bimmertt
Lieutenant Colonel
bimmertt's Avatar
98
Rep
1,800
Posts

Drives: 2007 e92 335i
Join Date: Nov 2008
Location: Earth

iTrader: (7)

Quality of Replica E92 LCI Tail Lights

Looking to get feedback on the quality of the replica lci tail lights. I just received a pair and am a little disappointed with the quality. Some of the housing edges have rough spots. Some of the internal parts also don't look quite right. I had to play with the passenger tail light a ton just to get it 95%. I've purchased replica parts before that were really close to oem quality. Has anyone received lci tails that are close to oem quality or do these sound par for the course? Trying to figure this out while I can still get a full refund. Thanks.
Appreciate 0
      09-07-2018, 08:25 PM   #2
Biginboca
Colonel
Biginboca's Avatar
3791
Rep
2,738
Posts

Drives: 2009 E92 328i 6MT
Join Date: Jun 2017
Location: Boynton Beach, FL... USA

iTrader: (3)

I bought some depo one’s off eBay about a year ago. They are not oem quality but they are definitely good enough for the price. They have been on my car a year and I have no issues.

I got the ones that came with a resistor and said no coding required, but I still got bulb warnings and had to code LED lights. Outside of that no complaints at all.


Last edited by Biginboca; 09-07-2018 at 08:31 PM..
Appreciate 0
      09-07-2018, 09:05 PM   #3
bimmertt
Lieutenant Colonel
bimmertt's Avatar
98
Rep
1,800
Posts

Drives: 2007 e92 335i
Join Date: Nov 2008
Location: Earth

iTrader: (7)

Quote:
Originally Posted by Biginboca View Post
I bought some depo one's off eBay about a year ago. They are not oem quality but they are definitely good enough for the price. They have been on my car a year and I have no issues.

I got the ones that came with a resistor and said no coding required, but I still got bulb warnings and had to code LED lights. Outside of that no complaints at all.

Your fitment definitely looks better than mine. The gap between the outer and inner tails looks perfect. Mine are more closer together. I'm betting I could probably play with it some more to get the fitment a little better. Do yours have any noticeable imperfections?
Appreciate 0
      09-07-2018, 09:16 PM   #4
IllSic_Design
Colonel
IllSic_Design's Avatar
2125
Rep
2,759
Posts

Drives: 12 E92 328i
Join Date: Jun 2016
Location: Northern California

iTrader: (1)

Quote:
Originally Posted by bimmertt View Post
Your fitment definitely looks better than mine. The gap between the outer and inner tails looks perfect. Mine are more closer together. I'm betting I could probably play with it some more to get the fitment a little better. Do yours have any noticeable imperfections?
Which brand did you buy, Depo also?
Appreciate 0
      09-07-2018, 09:46 PM   #5
bimmertt
Lieutenant Colonel
bimmertt's Avatar
98
Rep
1,800
Posts

Drives: 2007 e92 335i
Join Date: Nov 2008
Location: Earth

iTrader: (7)

Quote:
Originally Posted by IllSic_Design View Post
Quote:
Originally Posted by bimmertt View Post
Your fitment definitely looks better than mine. The gap between the outer and inner tails looks perfect. Mine are more closer together. I'm betting I could probably play with it some more to get the fitment a little better. Do yours have any noticeable imperfections?
Which brand did you buy, Depo also?
I don't think they're depos. From the posts I've seen, the depos come in branded boxes. This set seems to be unbranded. They did come with the error free harnesses with the load resistors.

The kit I got can be seen in this video:


Packaging is exactly the same.
Appreciate 0
      09-08-2018, 05:44 AM   #6
Biginboca
Colonel
Biginboca's Avatar
3791
Rep
2,738
Posts

Drives: 2009 E92 328i 6MT
Join Date: Jun 2017
Location: Boynton Beach, FL... USA

iTrader: (3)

Quote:
Originally Posted by bimmertt View Post
Your fitment definitely looks better than mine. The gap between the outer and inner tails looks perfect. Mine are more closer together. I'm betting I could probably play with it some more to get the fitment a little better. Do yours have any noticeable imperfections?
No noticeable imperfections. The only things I noticed were the plastic bulb holders that detach from the back and the large black piece that mounts to the rear were not molded as well as the stock light. I just swapped the stock parts onto the depo housing and tossed the ones that came with the depo.
Appreciate 0
      09-11-2018, 05:45 PM   #7
bimmertt
Lieutenant Colonel
bimmertt's Avatar
98
Rep
1,800
Posts

Drives: 2007 e92 335i
Join Date: Nov 2008
Location: Earth

iTrader: (7)

Here are pics of the imperfections inside the housings as well as one pic showing the rough edges in the inner tail light. I also found some loose dirt. If this is what reps are typically like I think I'm going to have to go oem.
Attached Images
    
Appreciate 0
      09-16-2018, 03:28 AM   #8
uvex02
Registered
0
Rep
1
Posts

Drives: E91 MPacket
Join Date: Sep 2018
Location: Targu Mures

iTrader: (0)

The imperfections are not sesisable from the distance. They look really nice.
Appreciate 0
      09-19-2018, 10:02 AM   #9
hassmaschine
Major General
United_States
3987
Rep
7,212
Posts

Drives: "NBO" 330i
Join Date: Jun 2014
Location: earth

iTrader: (0)

Real Depos are honestly nicer than modern BMW tailights IMO - at least for our X5, they definitely were a big step up. BMW has earned a reputation since the E46 of leaky lights, bad connectors, and failing electronics. my E90 hasn't had a problem but it also stays in a garage.
Appreciate 0
      09-19-2018, 11:57 AM   #10
Wolf 335
Brigadier General
Wolf 335's Avatar
Canada
2572
Rep
3,663
Posts

Drives: 2007 E92 335i
Join Date: Aug 2012
Location: Toronto

iTrader: (0)

Quote:
Originally Posted by bimmertt View Post
Here are pics of the imperfections inside the housings as well as one pic showing the rough edges in the inner tail light. I also found some loose dirt. If this is what reps are typically like I think I'm going to have to go oem.
Return those and ask for a new set. Those edges look bad.
Appreciate 0
      09-19-2018, 12:10 PM   #11
bimmertt
Lieutenant Colonel
bimmertt's Avatar
98
Rep
1,800
Posts

Drives: 2007 e92 335i
Join Date: Nov 2008
Location: Earth

iTrader: (7)

Quote:
Originally Posted by Wolf 335 View Post
Return those and ask for a new set. Those edges look bad.
I ended up returning them. I don't know if I want to go through the hassle of getting another set. Worried they'll be the same.
Appreciate 0
      09-19-2018, 05:23 PM   #12
toekneex04
New Member
United_States
7
Rep
16
Posts

Drives: 2007 BMW 335I e92 Monaco Blue
Join Date: Feb 2015
Location: Bay Area, CA

iTrader: (0)

I actually bought a pair of ebay lci lights and I had some trouble aligning the outer lights, but with some added/removal of washers, the fitment finally looked right or good enough. Overall the quality of the taillights were decent and I have no complaints.
Appreciate 0
      09-20-2018, 07:54 AM   #13
bimmertt
Lieutenant Colonel
bimmertt's Avatar
98
Rep
1,800
Posts

Drives: 2007 e92 335i
Join Date: Nov 2008
Location: Earth

iTrader: (7)

Quote:
Originally Posted by toekneex04 View Post
I actually bought a pair of ebay lci lights and I had some trouble aligning the outer lights, but with some added/removal of washers, the fitment finally looked right or good enough. Overall the quality of the taillights were decent and I have no complaints.
Can you PM the vendor you went with?
Appreciate 0
      09-20-2018, 08:02 AM   #14
Supermoon
Lieutenant
Supermoon's Avatar
South Korea
166
Rep
429
Posts

Drives: 2011 e92 335xi
Join Date: Aug 2015
Location: Seoul

iTrader: (6)

Garage List
I have a genuine set for sale.

How much did you pay for depo lights?
Attached Images
 
__________________
2011 E92 335i xDrive
Pure Stage 1 | DV+ & Inlet | Injen Intake | M3 Cowl | ETS 5" FMIC & CP | Aquamist HFS4 Direct Port | CSF Radiator | Wagner Catted DP | BMW PE | Apex FL-5 | Michelin PS4S | 335is Engine mount | SDW Monoball thrust arms | UUC Swaybars & SS Brake lines | Bilstein B8 | Dinan Springs & Shock mounts | Whiteline RSFB | M3 Rear Control arms | Manzo Toe arms | Wavetrac LSD
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:10 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST