[chaseb9]

I just swapped back in my stock DME and CAS and reprogrammed the vin on these modules KLIMA, FRM, DSC, and CTM. I started up the car and have a Lot if lights on and the car is misfiring, Yellow Brake Light, Yellow ABS light, And Yellow Traction Control Light. I’m getting missfires on two cylinders and getting codes, CDAD and a DME shadow code for my fuel pump which is 2AAF. Please someone help me.

[stevesingo]

RE DSC, use INPA to run a calibration of the pump and see how that goes.

[feuer]

Originally Posted by stevesingo

RE DSC, use INPA to run a calibration of the pump and see how that goes.

Calibration for the fuel pump? Do you know the steps fro this procedure in INPA?

[stevesingo]

Not fuel pump, DSC pump. I don't know the steps off the top of my head but a search of this site pulled this up...

Open INPA - choose you car - chassis in Script selection - Dynamic Stability control - <F6> (Ansteuern) - <F8> ( Condition Based service (CBS) ) - then reset both (<F1> CBS Reset VA, and <F2> CBS Reset HA ) - all done

You may also need to run <F1><F2>and <F3> under Ansteuern menu
Once all is done, just drive the car a short distance, and it should be fine .

My INPA is in German, so I don`t know the english names for everything

Credit to Kenti

[chaseb9]

Alright fixed all of that. Thank you guys!