|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
 |
|
BMW 3-Series (E90 E92) Forum
>
Cracked / stress fractures in oil pan?
|
 |
| 08-17-2019, 07:30 PM | #1 |
|
New Member
4
Rep 13
Posts |
Cracked / stress fractures in oil pan?
I am replacing the oil pan gasket and got the oil pan removed today. While cleaning it I noticed what looks like stress fractures in the oil pan. I'm replacing the gasket as preventative maintenance but it does look like it was leaking very slightly from the gasket, but not from the pan itself. From the attached pictures, should I replace the oil pan completely? Are these types of fractures normal?
Car is an 07 335 (n54) with 106,000 miles. Stock turbos, JB4, catless downpipes, full exuast, charge pipe w/BOV, BMS dual cone air intakes. Pump gas. On outside of pan:   On inside of pan:    |
| 08-17-2019, 09:29 PM | #2 |
|
General
 
19186
Rep 19,717
Posts |
Normal. Just a result of the casting process.
__________________
A manual transmission can be set to "comfort", "sport", and "track" modes simply by the technique and speed at which you shift it; it doesn't need "modes", modes are for manumatics that try to behave like a real 3-pedal manual transmission. If you can money-shift it, it's a manual transmission. "Yeah, but NO ONE puts an automatic trans shift knob on a manual transmission."
|
|
Appreciate
0
|
 |
| Bookmarks |
| Tags |
| cracked, n54, oil pan, stress fractures |
| Thread Tools | Search this Thread |
|
|
