P0328 p1328 p2e68 p2e69 non stop

Paz11 · 11-15-2019, 02:48 AM

Guys please help! This is so frustrating. I continually pop these codes almost instantly after beginning to drive the car. Kicks limp mode and reduces the turbos. These codes began to pop after replacing the HPFP if that changes anything. I’ve bought brand new bmw knock sensors from the dealership and no fix to the codes. Anyone?

dpaul · 11-15-2019, 07:20 AM

Since you have replaced the sensors, what's left is a wiring issue or a DME problem. DME rarely fails, at least not this way. Here's the wiring diagram:

https://www.newtis.info/tisv2/a/en/e...ontrol/oqj6nek

Pull off the X60005 connector at the DME and measure continuity of the wires to the sensor plugs. You may have injured the wiring during your HPFP replacement

11-15-2019, 02:48 AM	#1
Paz11 Registered 0 Rep 4 Posts Drives: 2008 BMW 335i E90 Join Date: Nov 2019 Location: British Columbia iTrader: (0)	P0328 p1328 p2e68 p2e69 non stop Guys please help! This is so frustrating. I continually pop these codes almost instantly after beginning to drive the car. Kicks limp mode and reduces the turbos. These codes began to pop after replacing the HPFP if that changes anything. I’ve bought brand new bmw knock sensors from the dealership and no fix to the codes. Anyone?
	Appreciate 0 Tweet Quote

11-15-2019, 07:20 AM	#2
dpaul Lieutenant Colonel 662 Rep 1,893 Posts Drives: 2009 E90 335xi, 2011 E93 M3 Join Date: Dec 2012 Location: Boston iTrader: (3)	Since you have replaced the sensors, what's left is a wiring issue or a DME problem. DME rarely fails, at least not this way. Here's the wiring diagram: https://www.newtis.info/tisv2/a/en/e...ontrol/oqj6nek Pull off the X60005 connector at the DME and measure continuity of the wires to the sensor plugs. You may have injured the wiring during your HPFP replacement
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search