|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Bmw 318 e90 n43 nightmare
|
|
03-14-2020, 10:47 AM | #1 |
New Member
2
Rep 13
Posts |
Bmw 318 e90 n43 nightmare
Ok so I have owned this petro bmw for 14 months, its been great untill just before Christmas when it started going pear shaped.
It had a miss fire on cylinder 4, took it to a bmw specialist and he said I had a faulty injector so he replaced the injector and all 4 plugs. Swapped the oil and oil filter as he said it had been contaminated and gave me the car back. All was fine until a month later when it started playing up again. Back to the garage and this time he said the faulty injector had killed the nox sensor and so he changed the nox sensor . Again all was good but this time only lasted 1 day. Took it back AGAIN and it smelt eggy and ran like crap, so he de sulpherised it and did something on a computer. I picked the car up yesterday as he was shutting an I could tell within 2 minutes it wasn't right. So I took the car home and got a neighbour to plug his computer into car to see what it said. The codes it gave are 0030702 cylinder balancing 003104 uneven running stratified charge 002af8 nox sensor linearly shear test 0029cf miss fire cylinder 3 0029d9 miss fire at low level tank I've already spent £1000 and its making me feel like crying.I really don't no what to do its only done 55k miles and its a lovely car but it's really getting me down. Any help or advice would be really appreciated |
03-15-2020, 04:50 AM | #2 |
Brigadier General
639
Rep 3,215
Posts
Drives: E92 325i MSport Coupe
Join Date: Apr 2012
Location: UK South East
|
No comfort, but your 'specialist' should have known that replacing just one injector is a receipe for further problems. He should have replaced all four.
__________________
E92 pre-LCI 325i - Ohlins R&T; H&R spacers; M3 strut brace; Swift thrust sheets; 3 x chassis braces; diff brace; N53 V-brace; 034 subframe inserts; BMS clutch stop; BMS CDV; RE g/box mounts; Delrin shift bushes; Saikoumichi OCC; Cyba scoops; BMW Perf Exhaust; HEL s/steel brake hoses; M3 rear spoiler; Recaro Sportster CSs; M3 white dash LEDs; LED Angels; LED side repeaters; BMW Perf black grille; CSL reps; SSDD carbon diffuser; Monster Wrap black roof/clear front
|
Appreciate
0
|
03-15-2020, 05:33 PM | #4 |
Lieutenant
106
Rep 575
Posts |
Don't give up just yet nothing is insurmountable.
Not sure what your guy is a "specialist" in but it doesn't appear to be E9x's. Has he even programmed the new injector correctly? To keep returning the car to you loaded with fault codes makes alarm bells ring in my head. I would consider taking it somewhere else to someone who has decent knowledge of your engine type but as Phil says you are probably looking at 3 more injectors at least. |
Appreciate
0
|
03-15-2020, 06:39 PM | #5 |
Private
7
Rep 92
Posts |
What year is your car and where are you located?
The n43 lci misfires can be hard to fix, the fault codes don’t always show the problem.... If the ecu chips have started to fail you will get loads of injector and coil pack codes plus cat failure codes - only way to fix this is replace three of the chips In the ecu. Sounds odd but this will cure the problems, I can recommend a bmw Specialst in the SE knows how to fix this - n43 one of BMW’s worst engines when they start to get worn. |
Appreciate
1
Jadeh1.50 |
Bookmarks |
Tags |
bmw, cylinder, engine light, fault codes, injectors, missfire |
Thread Tools | Search this Thread |
|
|