19x9.5 20mm square setup? anyone have it?

Evan392 · 03-20-2020, 04:31 PM

i ordered this setup thinking it would work but now im not so sure. anyone run it or have photos?

BM3Rrrr · 03-21-2020, 05:58 AM

I assume you mean et20 right?
You'll be rubbing on all corners i bet with that setup.
Fronts will have a massive poke (google mexiflush)

DM_e92 · 04-04-2020, 10:26 PM

I ran 19 x 9.5 et 22 on all 4 corners before with eibach springs and no rub... I now run 19.x9.5 et22 and 19x 10.5 et22 with the rear rubbing slightly.

pennychow · 04-07-2020, 05:53 AM

I can't believe it ..... >_<

marconi118 · 04-14-2020, 04:30 AM

Go at least et 30

maryjane · 04-14-2020, 09:58 AM

I have 18x8.5 et 20 and 18x9.5 et 20
with 235/40fr and 265/35rear both rubbed
with 225/40fr and 255/35 rear only the rears rub SLIGHTLY on big bumps
BUT PRE LCI has 8mm more clearance in the rear so you might can fit the 265s

SanNico335i · 05-02-2020, 12:52 PM

This front wheel fitment is NOT recommended. Offset is way too aggressive. You could go 19x9.5 et35 with a 5mm spacer for inner clearance and -3.0
+ degrees of front camber. Optimal is 19x9 et30 for looks and performance.

The rear fitment will work with a 245/30 tires, maybe 255/30 with a fender roll. Lots of variables with ride height and tire choice. Wider tires will require more camber and a roll for sure. Optimal is 19x9.5 et35, direct fitment.

Good luck!

pennychow · 05-12-2020, 03:50 AM

Quote:

Originally Posted by maryjane

I have 18x8.5 et 20 and 18x9.5 et 20
with 235/40fr and 265/35rear both rubbed
with 225/40fr and 255/35 rear only the rears rub SLIGHTLY on big bumps
BUT PRE LCI has 8mm more clearance in the rear so you might can fit the 265s

Any photo of your car,pls

pennychow · 05-12-2020, 03:51 AM

Quote:

Originally Posted by Evan392

i ordered this setup thinking it would work but now im not so sure. anyone run it or have photos?

how is the setup? any rubbing? can show us some photos?

maryjane · 05-12-2020, 10:43 AM

Only pics I have at the moment

pennychow · 05-12-2020, 12:37 PM

Thanks！nice¡
Why you use et20 for rear but not as flush as I expected...

the93owner · 05-16-2020, 08:10 PM

Quote:

Originally Posted by maryjane

I have 18x8.5 et 20 and 18x9.5 et 20
with 235/40fr and 265/35rear both rubbed
with 225/40fr and 255/35 rear only the rears rub SLIGHTLY on big bumps
BUT PRE LCI has 8mm more clearance in the rear so you might can fit the 265s

Looking at the photos I'm assuming that's on stock height?

maryjane · 05-16-2020, 08:46 PM

Yes stock height. Doesn't look as flush cause they're only 255s, with 265s the rubbing was much worse.

pennychow · 05-17-2020, 09:43 PM

Quote:

Originally Posted by maryjane

Yes stock height. Doesn't look as flush cause they're only 255s, with 265s the rubbing was much worse.

understood. Thanks for sharing!

03-20-2020, 04:31 PM	#1
Evan392 Registered 0 Rep 2 Posts Drives: 2007 bmw 335i e93 Join Date: Mar 2020 Location: ontario iTrader: (0)	19x9.5 20mm square setup? anyone have it? i ordered this setup thinking it would work but now im not so sure. anyone run it or have photos?
	Appreciate 0 Tweet Quote

03-21-2020, 05:58 AM	#2
BM3Rrrr Davy Jones, Giant Squid 272 Rep 913 Posts Drives: a Pirate Ship Join Date: Jun 2015 Location: The Isle of Tortuga iTrader: (0)	I assume you mean et20 right? You'll be rubbing on all corners i bet with that setup. Fronts will have a massive poke (google mexiflush) __________________ 2010 e90 335i LCI - xHP - Mishimoto - BMS - CPe - Turbosmart - MHD - Eibach - Koni - VMR - LUX
	Appreciate 1 Quote

04-04-2020, 10:26 PM	#3
DM_e92 Private 21 Rep 68 Posts Drives: 2007 e92 335i Join Date: Nov 2016 Location: South Jersey iTrader: (0)	I ran 19 x 9.5 et 22 on all 4 corners before with eibach springs and no rub... I now run 19.x9.5 et22 and 19x 10.5 et22 with the rear rubbing slightly.
	Appreciate 1 Quote

04-07-2020, 05:53 AM	#4
pennychow Enlisted Member 3 Rep 47 Posts Drives: bmw e90 Join Date: Apr 2020 Location: hong kong iTrader: (0)	I can't believe it ..... >_<
	Appreciate 0 Quote

04-14-2020, 04:30 AM	#5
marconi118 Major 96 Rep 1,186 Posts Drives: 06/07 e93 335i Join Date: Nov 2008 Location: europe iTrader: (0)	Go at least et 30
	Appreciate 0 Quote

04-14-2020, 09:58 AM	#6
maryjane First Lieutenant 105 Rep 323 Posts Drives: 2011 335d Msport 3 Snail. Join Date: Mar 2020 Location: GA iTrader: (0)	I have 18x8.5 et 20 and 18x9.5 et 20 with 235/40fr and 265/35rear both rubbed with 225/40fr and 255/35 rear only the rears rub SLIGHTLY on big bumps BUT PRE LCI has 8mm more clearance in the rear so you might can fit the 265s
	Appreciate 1 Quote

05-02-2020, 12:52 PM	#7
SanNico335i New Member 6 Rep 11 Posts Drives: 2013 E92 335i Join Date: Oct 2019 Location: Madison, WI iTrader: (0)	This front wheel fitment is NOT recommended. Offset is way too aggressive. You could go 19x9.5 et35 with a 5mm spacer for inner clearance and -3.0 + degrees of front camber. Optimal is 19x9 et30 for looks and performance. The rear fitment will work with a 245/30 tires, maybe 255/30 with a fender roll. Lots of variables with ride height and tire choice. Wider tires will require more camber and a roll for sure. Optimal is 19x9.5 et35, direct fitment. Good luck! Last edited by SanNico335i; 05-02-2020 at 12:57 PM..
	Appreciate 0 Quote

05-12-2020, 10:43 AM	#10
maryjane First Lieutenant 105 Rep 323 Posts Drives: 2011 335d Msport 3 Snail. Join Date: Mar 2020 Location: GA iTrader: (0)	Wheels Only pics I have at the moment Attached Images
	Appreciate 0 Quote

05-12-2020, 12:37 PM	#11
pennychow Enlisted Member 3 Rep 47 Posts Drives: bmw e90 Join Date: Apr 2020 Location: hong kong iTrader: (0)	Thanks！nice¡ Why you use et20 for rear but not as flush as I expected...
	Appreciate 0 Quote

05-16-2020, 08:46 PM	#13
maryjane First Lieutenant 105 Rep 323 Posts Drives: 2011 335d Msport 3 Snail. Join Date: Mar 2020 Location: GA iTrader: (0)	Yes stock height. Doesn't look as flush cause they're only 255s, with 265s the rubbing was much worse.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search