[jesrour88]

Hello All,

I have an 2008 E90 N54 vehicle. I have spent quite some time researching, trial and error with installing INPA and trying to code my injectors. I have followed the instructions provided with my purchase for INPA from cj83lex. See image below:



I am not sure how many others have purchased from him, but any assistance would be greatly appreciated. As you can see from the image above, the first link is for Windows 32 bit. This file includes 2.47.1 SP-Daten.rar; ncsdummy.zip; NCSEXPER.rar (this includes EDIABAS; INPA; and NCSEXPER); WinKFP v5.1.6 setup25.rar; a couple of excel files, pdf files and a "readme first.pdf" written by Junior. In the image above, the second link contains EDIABAS and NCSEXPER for Windows 64 bit. I did not mess with the other two links as they did not really apply to my vehicle.

I have a Windows 7 64 bit laptop. I extracted the INPA file from the NCSEXPER.rar file in the 32 bit download link as the 64 bit download link did not contain INPA. I placed this file in my C: Drive. I then place the EDIABAS and NCSEXPER files from the 64 bit link in my C: Drive. After placing these files in the C: Drive, I followed Junior's instructions per the PDF file. My laptop recognizes my cable and it is set to com 1 with a latency of 1ms. I have edited the environment variable path as instructed. In INPA, both circles are black next to "Battery" and "Ignition", see image below:



Following Junior's instructions and trying to communicate? with the airbag, I received an error. I searched this on the forums I have read to keep going as a lot of people get this error. So I continued with NCS EXPERT. I got to instruction #67 and was not able to locate option "BC_DIGITAL_V". After this, I just closed NCS EXPERT and went back to INPA. In INPA, I selected "F9" for "E90" and selected my engine type, see image below:



After selecting my engine type I select "F9" again for "Systemdiagnosen", see image below:



After hitting "F9" for "Systemdiagnosen" I do not see a "Shift + F4 EOL Injektormengenabgleich" option as discussed by vasillalov in his video at http://www.e90post.com/forums/showthread.php?t=651538. If you also will notice, at the bottom of my INPA, you will see blank boxes under options "F1" through "F9", see image below:



I am not sure where I went wrong during the install/extraction but any assistance would be greatly appreciated. Just a little bit of extra information, I did not mess with the Daten, ncsdummy, and WinKFP files that were provided in the 32 bit download.

Let me know if you have any further questions.

Thanks in advance!

Best Regards,

JS

[Douche]

You paid somebody so they would share inpa with you, is that it?

Well... Maybe I missed something, sorry.
But if that's the case, he should support you to get his money's worth, no?

[Douche]

[jesrour88]

Originally Posted by valter

You do realize I am not able to get to this point in vasillalov's video. I also posted a the link for the thread showing the DIY of injector swapping and coding which includes this video that you have included in your reply assuming it would assist me with my problems and concerns.

[Douche]

Ops

[jesrour88]

Originally Posted by valter

Ops

Just in case you were still so concerned and wanting to help me...I was able to solve my own problem.

[jesrour88]

If anyone has come across the same issue I have, I solved my issue. I was able to create a virtual PC running XP as the operating system within Windows 7. Feel free to PM me if you need help with this.

[Douche]

Originally Posted by jesrour88

Just in case you were still so concerned and wanting to help me...I was able to solve my own problem.

Lol congratulations smart ass.
Hope others noted your username like I did, and hope you can find help somewhere else next time.

Good riddance.

[jesrour88]

Originally Posted by valter

Lol congratulations smart ass.
Hope others noted your username like I did, and hope you can find help somewhere else next time.

Good riddance.

Well done

[123Britt]

Having similar issues here. Although I was never able to even get INPA
BAT & ING Screen to register. I was only able to get Expert to find my vin.
I have an another laptop (old 32bit machine) thinking that would be my next best option to load only INPA & to simply code my 6 new injectors just waiting to be installed. However, I may just call around town to see how much I can pay someone to code them . EXPERT is just way to complicated for me.

[jesrour88]

Originally Posted by 123Britt

Having similar issues here. Although I was never able to even get INPA
BAT & ING Screen to register. I was only able to get Expert to find my vin.
I have an another laptop (old 32bit machine) thinking that would be my next best option to load only INPA & to simply code my 6 new injectors just waiting to be installed. However, I may just call around town to see how much I can pay someone to code them . EXPERT is just way to complicated for me.

I see you say you have another laptop that is older. I'm assuming you have a new one too. What are the operating systems on both. The virtual machine worked very well for me and I'd recommend it.

[Scrippy]

Guys,

It really depends on where you get the software. I got my cable and software from eBay and it works outstandingly on Windows 7 Professional 64 bit. The bottom line is.....if you paid for it, make the person who sold it to you accountable. I got lucky and my $35 eBay cable and software works great but if it didn't I would have ruined the dude that sold it to me on eBay. So make these toolboxes support you if they sold it to you. I help anyone who asks if I'm knowledgable in the particular area of question. All the guys on this forum charging people for remote assistance and or support are Duechey! The point of a forum is to meet and help other enthusiasts not nickel and dime them in hopes to obtain money or notoriety.

[onefireball]

Scrippy, Can you tell me exactly which setup you bought on ebay?
I am new to this and ordered a setup from Bcables that I can't get working.
My pc is 64bit W7, thought about getting an older XP machine dedicated for this purpose.

I have 3 cars that I would like mostly to be able to do diagnostics and light coding...battery, injectors, etc..
01 330ci, 08 335i, 08 750i.

Any and all help is appreciated.
Anybody else that wants to give me a recommendation is also welcome.
Thanks!

[jesrour88]

Originally Posted by onefireball

Scrippy, Can you tell me exactly which setup you bought on ebay?
I am new to this and ordered a setup from Bcables that I can't get working.
My pc is 64bit W7, thought about getting an older XP machine dedicated for this purpose.

I have 3 cars that I would like mostly to be able to do diagnostics and light coding...battery, injectors, etc..
01 330ci, 08 335i, 08 750i.

Any and all help is appreciated.
Anybody else that wants to give me a recommendation is also welcome.
Thanks!

You do not have to get another machine. With Windows 7, it is possible to run a Virtual PC (Windows XP). I bought the $90 cable off of eBay which took 3 weeks or so to get here.

Let me know if you have more questions about my set up.

[charles.soori]

I'm not sure how you guys installing Inpa but you don't need any old laptop or xp, I'm running 8.1 64 and everything works fine

[08TUNDRA]

Sorry to revive an old thread, but can someone please help me I am having same problem as the OP did in his first post but i have been able to use NCS Expert perfectly and Winkpf to flash my transmission, I need to use INPA to code my new injectors however when I try to get to the coding menu after clicking systemdiagnosen the options on the bottom are blank and there is nothing about injectors just like in OP's first post. Please help me guys im desperate. Running windows 7 64 bit

[SilverJester]

I know this is an old thread, but I'm running into the exact same issues as the OP. I used "Mike's Easy BMW Tools" installer to install onto my windows 10 laptop. I tried changing INPA compatibility mode to Windows 7 and XP, but got the same results.

I believe Daten v53.3 came with the installer, I don't know if maybe I need a newer version?

EDIT:
Nevermind, I found the solution to be an incomplete translated file that was included specifically with "Mikes Easy BMW Tools". In case anyone else has this issue, here's a link to the solution.

[jesrour88]

Originally Posted by SilverJester

I know this is an old thread, but I'm running into the exact same issues as the OP. I used "Mike's Easy BMW Tools" installer to install onto my windows 10 laptop. I tried changing INPA compatibility mode to Windows 7 and XP, but got the same results.

I believe Daten v53.3 came with the installer, I don't know if maybe I need a newer version?

EDIT:
Nevermind, I found the solution to be an incomplete translated file that was included specifically with "Mikes Easy BMW Tools". In case anyone else has this issue, here's a link to the solution.

Glad to hear you got it working!

[M47tu2David]

Hi all
I have an e90 2007 320d
Being out of the country my roommate had the brilliant idea of disconnecting the battery for about 2 years and now I can't even get it to turn, I've now just about rebuild the entire motor but as I've been out of the country for 2 years he had a prang with his audi and wanted to use my BMW but he too could not get it started, he got a backjard macanic to try and get it to run but as it is an m47 and not a n47 he did not know what he was doing and I think he did more damage than he would admit

So now here I am
I have :laptop with Windows 10
:USB to obd (k+dcan)
:inpa ((plus all the tools that accompany it)
even got it all to communicate with the
bmw)
:a new battery (fully charged)
:new injectors x4 (with 7 digit codes which
inpa only excepts 6 digits)

My problem :cas needs to be realigned
:injectors need to be programed
:and further issues

I also have team viewer on the laptop incase someone would care to have a look see or even assist with the issues
Tnx
For further information please watsapp me on 0766053186
Tnx again
Kind regards
Desperate