Sponsored by The Tire Rack

[AviatorBimmerFL]

Hello peeps! My car is a 2007 E92 Pre-LCI with rolled rear fenders. I am trying to dial in a Forgestar F14 setup before placing the order and I want to make sure I get this right.

My current setup is as follows:

Front wheels: 19x8.5 ET23
Front tires: 225/35ZR19

Rear wheels: 19x9.5 ET25
Rear tires: 255/30ZR19

This setup yields ZERO RUBBING both front and rear.

So by going with the above specs, I inputted those numbers into a wheel offset calculator as a "target", where I will try to get the new wheel to match as much as possible to avoid rubbing.

I ended up with the following which will give me a DEEP CONCAVE setup in the front and a SUPER DEEP CONCAVE setup in the rear. These are attached to this post for a visual reference as well.

Front wheels: 19x9.5 ET35
Front tires: 245/35ZR19

Rear wheels: 19x10 ET30
Rear tires: 265/30ZR19

Will this setup work? Am I on the right track or am I going about this the wrong way?

Thanks in advance!