[jooology]

Has anyone used Meg#83? Is it comparable to PO106FF?

[oneshare325]

http://thedetailinghandbook.com/Polish_Chart.aspx

here you go... 83 has a higher cut....106 less cut but finishes down better!

[jooology]

Originally Posted by oneshare325

http://thedetailinghandbook.com/Polish_Chart.aspx

here you go... 83 has a higher cut....106 less cut but finishes down better!

What pad would you use on #83. A light cutting pad or polishing pad?

[oneshare325]

Originally Posted by jooology

What pad would you use on #83. A light cutting pad or polishing pad?

Da or rotary? picture of the paint?

[jooology]

Rotary

[oneshare325]

picture?

[jooology]

I dont have a picture.

[jooology]

How do you know when to up the cut of the pad or up the type of polish your using to correct?

[oneshare325]

Start with a white and see if that does it....if not move up to a orange....(you use a rotary and you don't know which compound or pad to use?) I really don't think you should be using a rotary......

[jooology]

I didn't think #83 was considered a compound.

[oneshare325]

Originally Posted by jooology

I didn't think #83 was considered a compound.

compound is just a word...

83 has a good amount of cut...what come companies call a compound some call polishes...it is better to think of it on a scale..1 to 10 scale...I would say 83 is a 6 out of 10...106 is like a 4....

[jooology]

Thanks for your help.