|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
e92 Front Bumper Removal DIY
|
|
09-01-2011, 04:53 PM | #67 |
Colonel
140
Rep 2,517
Posts
Drives: '11 335xi e92 M-Pak
Join Date: Mar 2009
Location: GTA/KW, Canada
|
Finally I found this! This will come very handy...
I will be removing my front bumper this weekend to install the HID fog lights...
__________________
|
Appreciate
0
|
09-01-2011, 05:55 PM | #68 |
Brigadier General
308
Rep 4,443
Posts |
I got the hang of the headlight washer removal and reattachment. A great little trick too.
Took mine off and then on no sweat. Much easier without the wheels on |
Appreciate
0
|
09-23-2011, 01:36 AM | #69 |
Major
59
Rep 1,038
Posts |
According to some other DIYs I saw on the net, it is sufficient to remove like only 3 bolts in each wheel well in order to pull away the wheelarch lining and get access to those hidden 2 bolts. This DIY requires removing like 6 bolts in the left well and 10 bolts in the right well (the same 6 plus 4 more for the oil cooler grille). Is it really necessary to remove all these bolts?
For example, this DIY - http://www.e90post.com/forums/showthread.php?t=16992 - claims that only 2 bolts need to be removed in each wheel well before we can pull aside wheelarch lining. The bumper removal guide at umnitza also says that only two bolts have to be removed on the fender liner. (Interestingly, this gude says that the hoidden bolts are 8mm, while umnitza guide says that they are 10mm). Last edited by AndreyT; 09-23-2011 at 01:46 AM.. |
Appreciate
0
|
04-07-2012, 01:27 PM | #70 |
Lieutenant
21
Rep 421
Posts |
would anyone not reccomend taking a paper towel and maybe water and wiping down the intercooler/ air ducts if they are dirty, or maybe just a dry paper towel. i was thinking about doing that but idk if it would be bad to do or not...thanks
|
Appreciate
0
|
05-31-2013, 08:39 PM | #74 |
Enlisted Member
6
Rep 45
Posts |
Awesome write up - thank you
Question - do you need to remove the entire bumper in order to take the lower side grills out? Or is this something I could do with the bumper on by simply pushing down on the tabs that hold it on? Thanks |
Appreciate
0
|
06-03-2013, 01:11 AM | #76 |
Enlisted Member
6
Rep 45
Posts |
here's the photos:
http://www.billswebspace.com/e92FrontBumperRemoval.htm Anyone take out the lower grills??? Do you need to remove the bumper completely to do so? |
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|