2008 May production and chip

ImolaZHP · 06-20-2008, 12:00 PM

Hi all,

New E92 owner here. I read some post about new ECU program and possible problem with mods like JB2... etc.

What exactly is the problem?
I don't have i-Drive, How can I figure out my ECU software version?

Thanks
William

Mike07335i · 06-20-2008, 12:31 PM

Quote:

Originally Posted by ImolaZHP

Hi all,

New E92 owner here. I read some post about new ECU program and possible problem with mods like JB2... etc.

What exactly is the problem?
I don't have i-Drive, How can I figure out my ECU software version?

Thanks
William

You can't... Only the dealer can tell you.

Mike

amuzement · 06-20-2008, 01:25 PM

JB2 is still possible, but its power has been cut due to the new software that they are installing on our bimmers when we take it in for service. If you want a tune, then I suggest you either get an SSTT, V3, Dinan, or wait for the JB3.

mistermojorizin · 06-21-2008, 02:35 AM

they switched to the new ecu in march. so just look at your production date on the driver's side door. the ecu software can be loaded on pre march cars too though. and chances are everyone will get it sooner or later.

basically you can run jb2 with some reduced functionality. and then you can get credit for your jb2 when jb3 comes in august which will have full functionality.

sstt works but probably gives less hp than jb2.

dinan works.

procede v3 works.

these are the most popular options so you're all good. my advice tho, wait till the shark edit comes out in august and flash your own car with a tune you can create yourself, edit, or just buy

oc24 · 06-21-2008, 02:42 AM

the shark edit is not compatible with msd81. the version coming out is only for msd80.

mistermojorizin · 06-21-2008, 02:54 AM

it'll still work with 29.2 though? my 135's a feb 08 build.

oc24 · 06-21-2008, 10:03 AM

Quote:

Originally Posted by mistermojorizin

it'll still work with 29.2 though? my 135's a feb 08 build.

yes, msd80 is fine, whatever bmw progman is on it. if i had a feb08 build i'd pull off the ecu cover just to double check though.

ImolaZHP · 06-21-2008, 09:45 PM

Thanks a lot guys. I feel better about it now.

I don't drag race. I just do autox and some track days. I think a JB2 or JB3 would be a choice for cheap ass like me.

Orient330iNYC · 06-22-2008, 03:20 AM

Quote:

Originally Posted by slubu

yes, msd80 is fine, whatever bmw progman is on it. if i had a feb08 build i'd pull off the ecu cover just to double check though.

I'm pretty sure that the 135 has had the MSD81 since start of production(US bound production anyway).

David 12 · 06-22-2008, 12:08 PM

Pre-March 135's have V80; at least that is what I was able to discern from the 1addict's site. However, it is best to take a look at your ecu to verify.

06-20-2008, 12:00 PM	#1
ImolaZHP Private 2 Rep 79 Posts Drives: E46 Imola ZHP coupe Join Date: May 2007 Location: NYC iTrader: (0)	2008 May production and chip Hi all, New E92 owner here. I read some post about new ECU program and possible problem with mods like JB2... etc. What exactly is the problem? I don't have i-Drive, How can I figure out my ECU software version? Thanks William __________________ 2014 F25 35i M Sport 2010 E90 SG M Sport - ED -> recycled 2008 E92 AW ED -> Nurburgring -> PCD -> recycled 2005 E46 Imola ZHP -> back to BMW recycle bin
	Appreciate 0 Tweet Quote

06-20-2008, 01:25 PM	#3
amuzement First Lieutenant 10 Rep 312 Posts Drives: F22 228i M Sport Join Date: Apr 2008 Location: Anaheim Hills, CA iTrader: (0)	JB2 is still possible, but its power has been cut due to the new software that they are installing on our bimmers when we take it in for service. If you want a tune, then I suggest you either get an SSTT, V3, Dinan, or wait for the JB3.
	Appreciate 0 Quote

06-21-2008, 02:35 AM	#4
mistermojorizin Lieutenant Colonel 41 Rep 1,657 Posts Drives: 135i Join Date: Apr 2008 Location: Los Angeles iTrader: (0)	they switched to the new ecu in march. so just look at your production date on the driver's side door. the ecu software can be loaded on pre march cars too though. and chances are everyone will get it sooner or later. basically you can run jb2 with some reduced functionality. and then you can get credit for your jb2 when jb3 comes in august which will have full functionality. sstt works but probably gives less hp than jb2. dinan works. procede v3 works. these are the most popular options so you're all good. my advice tho, wait till the shark edit comes out in august and flash your own car with a tune you can create yourself, edit, or just buy
	Appreciate 0 Quote

06-21-2008, 02:42 AM	#5
oc24 Lieutenant Colonel 198 Rep 1,869 Posts Drives: White Lightning Join Date: Oct 2005 Location: Agrestic iTrader: (2)	the shark edit is not compatible with msd81. the version coming out is only for msd80. __________________ 2008 335i
	Appreciate 0 Quote

06-21-2008, 02:54 AM	#6
mistermojorizin Lieutenant Colonel 41 Rep 1,657 Posts Drives: 135i Join Date: Apr 2008 Location: Los Angeles iTrader: (0)	it'll still work with 29.2 though? my 135's a feb 08 build.
	Appreciate 0 Quote

06-21-2008, 09:45 PM	#8
ImolaZHP Private 2 Rep 79 Posts Drives: E46 Imola ZHP coupe Join Date: May 2007 Location: NYC iTrader: (0)	Thanks a lot guys. I feel better about it now. I don't drag race. I just do autox and some track days. I think a JB2 or JB3 would be a choice for cheap ass like me. __________________ 2014 F25 35i M Sport 2010 E90 SG M Sport - ED -> recycled 2008 E92 AW ED -> Nurburgring -> PCD -> recycled 2005 E46 Imola ZHP -> back to BMW recycle bin
	Appreciate 0 Quote

06-22-2008, 12:08 PM	#10
David 12 Major 115 Rep 1,048 Posts Drives: 2019 BMW X5 50i BSM, M Sport Join Date: Jan 2007 Location: Omaha iTrader: (0)	Pre-March 135's have V80; at least that is what I was able to discern from the 1addict's site. However, it is best to take a look at your ecu to verify.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search