[jeffersonkr]

Hi im struggling to identify what is going on in my car.. my car is 62137 miles now and i just had maintence of transmition oil and filter

After oil and filter change everything was fine.. all selectors was getting right and not locked, then i reset the transmition adaptations with protools and im getting severous errors:

Chassis: E90
Model: 335i
Engine: N54
Body Style: SEDAN


****************** Errors ******************
--------------------------------------------
FAMILY [VARIANTE] | CODE: DESCRIPTION
--------------------------------------------

CAS [CAS] | A0B6: Selector-lever interlock
CAS [CAS] | A0B1: Input, selector-lever position, implausible

JBBF [JBBF70] | C90B: PT-CAN communication fault

FLA [FLA_65] | E0DB: Message (status of gear, 0x304 or status of reverse gear, 0x3B0), receiver FLA, transmitter EGS/HIM

PGS [PGS_65_2] | A06B: Antenna, bumper

FRM [FRM_70] | A8AE: Fog light, left, faulty

DME/DDE [MSD80] | CD87: PT-CAN communication fault
DME/DDE [MSD80] | CD99: Message (torque request, EGS, 0xB5) incorrect, receiver DME, transmitter EGS / HIM / SMG / DCT
DME/DDE [MSD80] | CD9E: Message (transmission data 2, 0x1A2) incorrect, receiver DME, transmitter EGS/SMG/DCT
DME/DDE [MSD80] | CD9D: Message (transmission data, 0xBA) incorrect, receiver DME, transmitter EGS/HIM/SMG/DCT
DME/DDE [MSD80] | 2E7F: EGS via PT-CAN2 and PT-CAN
DME/DDE [MSD80] | CDAD: Message error (request, wheel torque, drivetrain, 0xBF), DME receiver, DSC / LDM transmitter
DME/DDE [MSD80] | CDB0: Message error (display, transmission data, 0x1D2), DME receiver, ETC / HIM / SMG / DCT transmitter
DME/DDE [MSD80] | CD95: Message (operation, cruise control/ACC, 0x194) incorrect, receiver DME, transmitter DSC / SZL / LWS / ACC

DSC [DSC_87] | D357: No message (transmission, 0x 186), receiver DSC, transmitter EGS/SMG/DCT

EGS [GS19D] | 4E86: Solenoid valve 3
EGS [GS19D] | 4E86: Solenoid valve 3
EGS [GS19D] | CF07: Communication fault: PT-CAN
EGS [GS19D] | CF35: Messages from CAS, receiver EGS, transmitter CAS

TEL/MULF [ULF2_60] | A36C: ULF-SBX: Bluetooth antenna not connected or faulty

MASK/CCC [CICR] | E1E3: Message (reverse gear, 0x3B0) faulty, receiver CIC, transmitter FRM

please someone had this issue before, can help me with that?

obs: when i clear the errors solenoid valve3 error do not clear sometimes..
and sometimes the error just desapear then after running a while the car get limp mode again and the error appears again.

obs 2: when i change normal mode to sport mode it wont change, then after some researching i figure out could be possible damaged wire, so i opened and figure out my gray wire was already cut and held together with electrical tape.

[jeffersonkr]

the problem was solved, was an miss plugged X8500 Connector