Need help with TurboTuner installation

PeterPan · 07-16-2008, 03:07 PM

I've searched and can't find the answer, so I'm sorry if I missed something.

I'm using the USB cable and I'm pretty sure (can't see of course) that I'm getting the narrow end over that tab but even when the cable is on there I cannot slide the plug out of the connector. I've tried pulling the USB cord to me once it's over, but I don't want to snap the tab of course. In any event that did no good. How do I get the cable to come out?

Tia!!

Steve335i · 07-16-2008, 03:28 PM

I've seen others use a dime taped to a string. The dime is small enough and thin enough to push it under the tab with thumb and forefinger. Easy to feel when the dime is in far enough, lifting the tab then the plug pulls right out. Sounds like you don't have the tab up enough.

darkphantom · 07-16-2008, 03:54 PM

are you talking about the TMAP sensor?

Sal@AUTOcouture · 07-16-2008, 04:05 PM

the one that I installed was done w/ a flathead

darkphantom · 07-16-2008, 04:06 PM

Quote:

Originally Posted by AutoCouture

the one that I installed was done w/ a flathead

+1

I just removed the cowl/harness

made it MUCH easier to get to...someone said to use a guitar pick to do it if you have one...

bimmerlex · 07-16-2008, 04:22 PM

Quote:

Originally Posted by PeterPan

I've searched and can't find the answer, so I'm sorry if I missed something.

I'm using the USB cable and I'm pretty sure (can't see of course) that I'm getting the narrow end over that tab but even when the cable is on there I cannot slide the plug out of the connector. I've tried pulling the USB cord to me once it's over, but I don't want to snap the tab of course. In any event that did no good. How do I get the cable to come out?

Tia!!

Where in CA are you? If you're around LA area, I can just do it for you in less than a minute with my finger nail.

darkphantom · 07-16-2008, 04:34 PM

Quote:

Originally Posted by bimmerlex

Where in CA are you? If you're around LA area, I can just do it for you in less than a minute with my finger nail.

I don't have long fingernails

bimmerlex · 07-16-2008, 05:32 PM

Quote:

Originally Posted by darkphantom

I don't have long fingernails

I don't have long ones either, but can do it with just regular cut ones

BmwFanFL · 07-16-2008, 10:41 PM

I thought you just bend back and break a little tab off and then the tmap goes on and off easily forever more. If it gets loose, just add electrical tape.

Joonsup · 07-16-2008, 11:23 PM

Quote:

Originally Posted by BmwFanny

I thought you just bend back and break a little tab off and then the tmap goes on and off easily forever more. If it gets loose, just add electrical tape.

umm please tell me you're kidding.

BmwFanFL · 07-16-2008, 11:26 PM

Quote:

Originally Posted by joonsup

umm please tell me you're kidding.

yeah, I was kidding. I apologize, I'm sure there are now 8 broken tmap clips out there and 3 people shopping for electrical tape.

Dr_Dirt · 07-16-2008, 11:26 PM

Quote:

Originally Posted by PeterPan

I've searched and can't find the answer, so I'm sorry if I missed something.

I'm using the USB cable and I'm pretty sure (can't see of course) that I'm getting the narrow end over that tab but even when the cable is on there I cannot slide the plug out of the connector. I've tried pulling the USB cord to me once it's over, but I don't want to snap the tab of course. In any event that did no good. How do I get the cable to come out?

Tia!!

If you push the USB plug all the way (1") onto the tab it automatically lifts the tab. Then you just pull the TMAP cable out.
You do it all with one hand and whatever you do don't lift up on the USB cable while its on the tab.

JOe335i · 07-16-2008, 11:28 PM

Quote:

Originally Posted by BmwFanny

yeah, I was kidding. I apologize, I'm sure there are now 8 broken tmap clips out there and 3 people shopping for electrical tape.

hahaha that was funnyy

Joonsup · 07-16-2008, 11:33 PM

Quote:

Originally Posted by BmwFanny

yeah, I was kidding. I apologize, I'm sure there are now 8 broken tmap clips out there and 3 people shopping for electrical tape.

LOL whew ok. you got me there. haha

jossler · 07-17-2008, 02:35 AM

Just installed mine yesterday. Had trouble at first but figured out that once you have the usb connector on there properly, you should be able to gently tug on the tmap sensor cables themselves to dislodge the connector. Should require little to no force when pulling. And usb is definately the way to go!

2e9x's · 07-17-2008, 09:14 AM

Well...did you get it or do you need help? I am So Cal and happy help if you need.

e90AW335i · 07-17-2008, 09:18 AM

If you have trouble with this mod, PLEASE do not add anything else to your car....

BES335xi · 07-17-2008, 10:25 AM

ROFLMAO...

Finnie · 07-18-2008, 08:29 AM

Yup broke the wee tab on mine, now held on by tape!!!!!!!!!!!!!!

In need of a new plug if anyone can help!!!!!!!!!

phil_ · 07-18-2008, 09:33 AM

Quote:

Originally Posted by jossler

Just installed mine yesterday. Had trouble at first but figured out that once you have the usb connector on there properly, you should be able to gently tug on the tmap sensor cables themselves to dislodge the connector. Should require little to no force when pulling. And usb is definately the way to go!

Like he said make sure you're pulling the wires and not on the connector sides (The sides are actually part of the assembly bolted to the car).

cwn23 · 07-18-2008, 09:38 AM

Quote:

Originally Posted by e90AW335i

If you have trouble with this mod, PLEASE do not add anything else to your car....

lol

07-16-2008, 03:07 PM	#1
PeterPan New Member 4 Rep 28 Posts Drives: 335i Join Date: Jul 2008 Location: CA iTrader: (0)	Need help with TurboTuner installation I've searched and can't find the answer, so I'm sorry if I missed something. I'm using the USB cable and I'm pretty sure (can't see of course) that I'm getting the narrow end over that tab but even when the cable is on there I cannot slide the plug out of the connector. I've tried pulling the USB cord to me once it's over, but I don't want to snap the tab of course. In any event that did no good. How do I get the cable to come out? Tia!!
	Appreciate 0 Tweet Quote

07-16-2008, 03:28 PM	#2
Steve335i Private First Class 3 Rep 111 Posts Drives: 335is Join Date: Oct 2007 Location: Tampa Bay iTrader: (0)	I've seen others use a dime taped to a string. The dime is small enough and thin enough to push it under the tab with thumb and forefinger. Easy to feel when the dime is in far enough, lifting the tab then the plug pulls right out. Sounds like you don't have the tab up enough.
	Appreciate 0 Quote

07-16-2008, 03:54 PM	#3
darkphantom Banned 631 Rep 5,945 Posts Drives: E93 335i Join Date: Aug 2007 Location: The place for Bimmers iTrader: (4)	are you talking about the TMAP sensor?
	Appreciate 0 Quote

07-16-2008, 04:05 PM	#4
Sal@AUTOcouture 746 Rep 10,100 Posts Drives: E93 M3, E36 M3 Join Date: Feb 2007 Location: Sofla iTrader: (30)	the one that I installed was done w/ a flathead
	Appreciate 0 Quote

07-16-2008, 10:41 PM	#9
BmwFanFL Second Lieutenant 5 Rep 216 Posts Drives: 2008 - 335i - Cobb stg 1 Join Date: May 2008 Location: Very Hot, Humid, Southeast iTrader: (0)	I thought you just bend back and break a little tab off and then the tmap goes on and off easily forever more. If it gets loose, just add electrical tape.
	Appreciate 0 Quote

07-17-2008, 02:35 AM	#15
jossler New Member 1 Rep 9 Posts Drives: AW BMW 335i Join Date: Mar 2008 Location: California iTrader: (1)	Just installed mine yesterday. Had trouble at first but figured out that once you have the usb connector on there properly, you should be able to gently tug on the tmap sensor cables themselves to dislodge the connector. Should require little to no force when pulling. And usb is definately the way to go!
	Appreciate 0 Quote

07-17-2008, 09:14 AM	#16
2e9x's Major 54 Rep 1,137 Posts Drives: 335i ED 7/07 Join Date: Dec 2006 Location: A Sunny Place iTrader: (2)	Well...did you get it or do you need help? I am So Cal and happy help if you need. __________________ 2010 Evo X - silver with a big, stupid wing on the back 2009 VW CC - Black/Black - with a 2011 328i on order to replace it - ED 8/1/11
	Appreciate 0 Quote

07-17-2008, 09:18 AM	#17
e90AW335i Major General 144 Rep 6,608 Posts Drives: e90 335i Join Date: Sep 2007 Location: ...... iTrader: (4)	If you have trouble with this mod, PLEASE do not add anything else to your car.... __________________ I install all tunes, intakes, o2 simms, and most cosmetic mods. PM me for a quote.
	Appreciate 0 Quote

07-17-2008, 10:25 AM	#18
BES335xi Colonel 92 Rep 2,132 Posts Drives: FBO+ N54xi Join Date: Mar 2008 Location: Queens, NYC iTrader: (4) Garage List 03/07 E90 335xi [1.00]	ROFLMAO... __________________ JB4+usb \| P3 Vent Boost Gauge v2 \| BMS OCC \| BMS DCI \| AMS FMIC \| AR xi CL DP's \| BT Tool \| Edibias/NCSExpert/INPA BMW Coding \| Cyba Quad Exhaust tips \| M-Tech Rear & M3 Front Bumper \| Red Cyba Air Scoops \| Blacklines \| Vinyl Overlays \| ACS Roof Spoiler \| Matte Black Grilles \| LED Side Mirrors \| Rear Euro Fogs \| etc.. .
	Appreciate 0 Quote

07-18-2008, 08:29 AM	#19
Finnie Might be selling the 335d touring 18 Rep 369 Posts Drives: Disco 4, F31 335d msport+ Join Date: Feb 2008 Location: Scotland iTrader: (1)	Yup broke the wee tab on mine, now held on by tape!!!!!!!!!!!!!! In need of a new plug if anyone can help!!!!!!!!!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search