[MeechyGold]

Sup bimmer bros. 08 335xi here. I pickedup a CIC controller along with the harness needed for it to power on for my non drive to idrive retrofit . WHERE can I find connector x13812? Might be a silly question but I’m having trouble locating what connector that is exactly. To my knowledge I’m supposed to connect Pin #1 (red - Power) from controller to Pin #3 of connector x11003 of fuse box. Thats the blue connector on the back of the JBE for my year correct? If so I have no trouble finding that. My only issue here is locating x13812 because it seems like the rest (ground,orange,green) of the wires go to x13812. Id like to keep it super oem but if there is an easier way to go about this that would also work THANKS IN ADVANCE MY BROTHERS🙏🏾

[ptpending]

the power for whole audio/navi headunit goes to the driver footwell near FRM and there is socket where plug for audio harness is connected, which then goes back to driver seat and in a front of it it goes near tunnel under heater to headunit
so it is ok to make a joint behind headunit and route positive cable to the controller under tunnel trim.