|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Replaced Xenon Bulbs and Control Unit... Dead again! (CCID-121)
|
|
01-12-2025, 10:13 PM | #1 |
Registered
0
Rep 2
Posts |
Replaced Xenon Bulbs and Control Unit... Dead again! (CCID-121)
My front passenger headlight just wouldn't let me rest.
A few months ago I noticed my passenger side headlight xenon was out. Swapped new xenon bulbs in, still not working. So I tested the ballast/control unit by swapping the left to right side and it worked, so away I went with ordering a control unit. I didn't go cheap either, ordered an oem ZKW brand. Everything worked - beauty. Now one month later, same headlight is out again. Any ideas what might cause a working headlight with new xenon bulbs and ballast to go out again so quickly? Error code associated with this was CCID-121. Error code went away when first swapped in the new ballast, everything was good. Now this Error is back. Appreciate any help, thanks!! |
Bookmarks |
Thread Tools | Search this Thread |
|
|