[LMB335IS]

I mess around with clusters a lot and I had a few people ask me about this. Curiosity finally got me so I bought a used one to test. The fit is exactly the same as a E9x cluster as is the pinout. I had to play with the coding to get the fuel level to read correctly and because of my M3 conversion code in the changes for the gear display but it seems to work perfectly, except because of the E P brake in the Z4, there's no brake light for the 335i p brake. I did the LEDs after the fact.

[Emilime75]

That's pretty cool.

[NYBulldog]

Wow. I'm impressed.

[salpone]

hello, so you changed the whole tacho with one of the Z4?

[LMB335IS]

Originally Posted by salpone

hello, so you changed the whole tacho with one of the Z4?

Yes, the whole instrument cluster.

[Zajac1]

Looks great, I Love it !

[kristikapa]

Originally Posted by LMB335IS

I mess around with clusters a lot and I had a few people ask me about this. Curiosity finally got me so I bought a used one to test. The fit is exactly the same as a E9x cluster as is the pinout. I had to play with the coding to get the fuel level to read correctly and because of my M3 conversion code in the changes for the gear display but it seems to work perfectly, except because of the E P brake in the Z4, there's no brake light for the 335i p brake. I did the LEDs after the fact.

I know it's an old topic, but I was wondering if it would be possible to use just the front cover from the z4. My car is a diesel... Since you had these open you might be able to help me with the answer hour this question. Thanks.

[LMB335IS]

Originally Posted by kristikapa

I know it's an old topic, but I was wondering if it would be possible to use just the front cover from the z4. My car is a diesel... Since you had these open you might be able to help me with the answer hour this question. Thanks.

Just using the front cover won't work. The clusters are the same size and use the same circuit board but everything else is just different enough that it won't fit properly.

[Julz90]

Originally Posted by LMB335IS

I mess around with clusters a lot and I had a few people ask me about this. Curiosity finally got me so I bought a used one to test. The fit is exactly the same as a E9x cluster as is the pinout. I had to play with the coding to get the fuel level to read correctly and because of my M3 conversion code in the changes for the gear display but it seems to work perfectly, except because of the E P brake in the Z4, there's no brake light for the 335i p brake. I did the LEDs after the fact.

Hello, hope you are still active here.


I have installed a 35i E89 speedometer in my E90 330i N52B30 automatic.

Unfortunately, the tank display is a bit crazy, and the general coding is a bit dubious.

Could you please help me?

Many thanks for any answer.

[eastsidaz]

Originally Posted by Julz90

Hello, hope you are still active here.


I have installed a 35i E89 speedometer in my E90 330i N52B30 automatic.

Unfortunately, the tank display is a bit crazy, and the general coding is a bit dubious.

Could you please help me?

Many thanks for any answer.

Pretty sure you would have to use PerfektToolbox to correct it.

[Yang Liu]

Sorry to dig this old thread.

I did the same conversation and after played around with the cluster coding, I still have issue with the fuel gauge. when power on the car , the fuel gauge is in correct position, but after some while the fuel gauge will fall down to 0 with empty fuel warning. Does anyone know how to fix it with coding?