Bad Gas? need code translation

Sniz · 10-16-2008, 03:14 PM

Was pulling out of my office parking lot and all of sudden, while at idle, I got a check engine and half engine icon.........I was shocked, havent seen that in a long time. Before I could even think of the reason my car started sputtering and shaking, felt like a very bad miss on more than 1 cylinder. It sounded really horrible. I turned the car off, restarted, same issue. I pulled out and drove very slowly for 1/2 mile or so, any application of gas would cause very rough acceleration.

When I pulled up to the next stoplight I felt everything smooth right out. After another 10 minutes or so of 30mph driving I got home, no more sputtering.

I checked my code reader w the car still running and pulled "0302".

Turned the car off, then back on, everything back to normal, no SES light.

I was craving Quizno's meatball sub, $5 footlong, cant beat it. Drove there and hit WOT in 2nd gear on my low boost map, perfect, no problems. Switched to high boost, nailed it, 11.5psi at part throttle, 14.4psi at WOT.....again, perfect. Car was a bullet.

Soooo what do you guys think? Bad gas? Fuel pump?

GhOsT_E90 · 10-16-2008, 03:18 PM

what i get from my auto enginuity Scan tool DTC library it says Cylinder 2 Misfire Detected

Alex@AKMotorwerk · 10-16-2008, 03:22 PM

here's what the 0302 code means:

"P0302 Cylinder 2 Misfire Detected"

Not sure what might have caused it tho. Maybe bad gas, doesn't seem like a fuel pump issue.

10-16-2008, 03:14 PM	#1
Sniz Lieutenant General 682 Rep 10,584 Posts Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD iTrader: (1)	Bad Gas? need code translation Was pulling out of my office parking lot and all of sudden, while at idle, I got a check engine and half engine icon.........I was shocked, havent seen that in a long time. Before I could even think of the reason my car started sputtering and shaking, felt like a very bad miss on more than 1 cylinder. It sounded really horrible. I turned the car off, restarted, same issue. I pulled out and drove very slowly for 1/2 mile or so, any application of gas would cause very rough acceleration. When I pulled up to the next stoplight I felt everything smooth right out. After another 10 minutes or so of 30mph driving I got home, no more sputtering. I checked my code reader w the car still running and pulled "0302". Turned the car off, then back on, everything back to normal, no SES light. I was craving Quizno's meatball sub, $5 footlong, cant beat it. Drove there and hit WOT in 2nd gear on my low boost map, perfect, no problems. Switched to high boost, nailed it, 11.5psi at part throttle, 14.4psi at WOT.....again, perfect. Car was a bullet. Soooo what do you guys think? Bad gas? Fuel pump? __________________
	Appreciate 0 Tweet Quote

10-16-2008, 03:18 PM	#2
GhOsT_E90 First Lieutenant 37 Rep 322 Posts Drives: 2008 BMW 335i E90 Join Date: May 2008 Location: Yelm, WA iTrader: (1) Garage List 2008 335i E90 [0.00]	what i get from my auto enginuity Scan tool DTC library it says Cylinder 2 Misfire Detected __________________ Mods: JB3,RR catted DP, RennArt resonated exhaust, AFE intake, 19x8.5 & 19.9.5 Linea Corsea Strasse mounted on Nitto Invo 235/35/19front & 285/30/19rear. M3 spoiler, front spilters and ACS roof spoiler. And whooping Blue0013 around the Nurburgring all day long.
	Appreciate 0 Quote

10-16-2008, 03:22 PM	#3
Alex@AKMotorwerk 209 Rep 9,339 Posts Drives: 2012 AW F10 535i Join Date: Jun 2007 Location: Hillsborough, NJ iTrader: (7)	here's what the 0302 code means: "P0302 Cylinder 2 Misfire Detected" Not sure what might have caused it tho. Maybe bad gas, doesn't seem like a fuel pump issue.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search