removing the plastics jack points?

JuniorDee · 01-02-2009, 03:56 PM

I recently damaged the plastic jack points on my car and bought replacements. Does anyone know how to remove the plastics jack points?

alextremo · 01-04-2009, 09:27 AM

Quote:

Originally Posted by JuniorDee

I recently damaged the plastic jack points on my car and bought replacements. Does anyone know how to remove the plastics jack points?

Small cats paw or flat head screwdriver, pry down until the plastic clips on the inside of the jack pads break. That's how they removed mine when they strapped it down for dyno.

JuniorDee · 01-05-2009, 12:54 PM

thanks for the tip.

txusa03 · 01-05-2009, 02:33 PM

Quote:

Originally Posted by alextremo

Small cats paw or flat head screwdriver, pry down until the plastic clips on the inside of the jack pads break. That's how they removed mine when they strapped it down for dyno.

what happen to the broken clips, will it roll around and make all sort of noise in that area?

e92phreak · 01-05-2009, 02:33 PM

how much did your replacements cost? and where did you buy them from?

Thanks.

JuniorDee · 01-05-2009, 03:08 PM

I ordered 4 from crownauto.com for $47.96 with shipping. I also order the jack pad adapter from ecstuning.com so I do not wreck the new ones.

oh, I will try the screwdriver method but the side trim on the car is very close to the jack point. I will most likely try to drill through the exsisting pad so that I can easily snap off the old one.

FrankoQ · 01-05-2009, 04:38 PM

did they break from lifting the car without the adapter?

JuniorDee · 01-06-2009, 11:37 AM

basically. I was used the wrong kind of jack and parts of the points are crushed. Learned my lesson, i will replace and never have the problem again.

I received the adapter in the mail yesterday, its very nice. Its machined from aluminum and painted black.

Dillusion · 01-07-2009, 01:35 PM

I jacked my car up almost 6 times in one month, and my pads are beyond destroyed

JuniorDee · 01-07-2009, 03:06 PM

the pad part # is 51 71 7 164 761

alextremo · 01-08-2009, 08:54 PM

Quote:

Originally Posted by txusa03

what happen to the broken clips, will it roll around and make all sort of noise in that area?

The whole thing came out as one piece (with the clips broke) no noise.

Quote:

Originally Posted by e92phreak

how much did your replacements cost? and where did you buy them from?

Thanks.

I purchased from Tischer (www.getbmwparts.com) 10.74/ea.

Quote:

Originally Posted by JuniorDee

I ordered 4 from crownauto.com for $47.96 with shipping. I also order the jack pad adapter from ecstuning.com so I do not wreck the new ones.

oh, I will try the screwdriver method but the side trim on the car is very close to the jack point. I will most likely try to drill through the exsisting pad so that I can easily snap off the old one.

I got the adapter from ECS as well - nice tool, worth the 20+ bucks. They were pried off parallel with the frame - didn't come close to the trim.

Quote:

Originally Posted by JuniorDee

the pad part # is 51 71 7 164 761

I had different p/n, but looks like the same piece.

http://www.realoem.com/bmw/showparts...65&hg=51&fg=80

JuniorDee · 01-09-2009, 11:31 AM

Quote:

Originally Posted by alextremo

I had different p/n, but looks like the same piece.

http://www.realoem.com/bmw/showparts...65&hg=51&fg=80

Hmmm... The part I ordered, I called the local dealer and asked him what car was the part number for, he said e92.

Wierd that there are different part numbers for the same thing.

alextremo · 01-09-2009, 01:30 PM

Quote:

Originally Posted by JuniorDee

Hmmm... The part I ordered, I called the local dealer and asked him what car was the part number for, he said e92.

Wierd that there are different part numbers for the same thing.

Mine's an e90 - maybe that's the difference? I can't imagine that these would actually be different parts for e90 v e92, maybe just the numbering system?

chinoxs203 · 01-09-2009, 04:19 PM

these look a bit better?

bavauto.com

p/n: 51 71 8 268 885

JuniorDee · 01-12-2009, 12:12 PM

i replaced 2 of the 4 jack points yesterday. I uesd a drill to drill through the plastic to removed the clips. It wasnt a 30sec job as I had hoped, it took a few minutes. I will post a few pic of the old and new jack points tomorrow.

BoostedCosta · 01-12-2009, 12:17 PM

Quote:

Originally Posted by Dillusion

I jacked my car up almost 6 times in one month, and my pads are beyond destroyed

lol so are mine idk if its impossble to even take them off....they are completely flat

01-02-2009, 03:56 PM	#1
JuniorDee Captain 78 Rep 610 Posts Drives: the speed limit Join Date: Apr 2007 Location: the land of brat and brotchen iTrader: (1)	removing the plastics jack points? I recently damaged the plastic jack points on my car and bought replacements. Does anyone know how to remove the plastics jack points? __________________ EDC.....viagra for your car
	Appreciate 0 Tweet Quote

01-05-2009, 12:54 PM	#3
JuniorDee Captain 78 Rep 610 Posts Drives: the speed limit Join Date: Apr 2007 Location: the land of brat and brotchen iTrader: (1)	thanks for the tip. __________________ EDC.....viagra for your car
	Appreciate 0 Quote

01-05-2009, 02:33 PM	#5
e92phreak General 392 Rep 21,745 Posts Drives: E92 335i TiAg/E46 323i TiAg Join Date: Mar 2007 Location: CA iTrader: (1) Garage List 2007 E92 335i [9.50] 2000 E46 323i [0.00]	how much did your replacements cost? and where did you buy them from? Thanks. __________________ 07 E92 335i \| TiAg \| Step \| Padl \| Cmft \| Alum Trm \| PDC \| Nav \| Assist \| Sat \| Lthr \| Prem \| Sprt \| Rear Splr \| RDSport Quads \| iPod \| V1 \| LT Refl \| VS Clear Bra \| OEM Lip \| KWV2 \| Mtec Sides \| BBS LM-R 00 E46 323i \| TiAg \| 5sp \| Sport \| Roof \| RDSport Cams \| RDSport tune \| RDSport Shift \| Volk LE37 \| M3 spoiler \| PSS9 \| SuperSprint \| Brembo
	Appreciate 0 Quote

01-05-2009, 03:08 PM	#6
JuniorDee Captain 78 Rep 610 Posts Drives: the speed limit Join Date: Apr 2007 Location: the land of brat and brotchen iTrader: (1)	I ordered 4 from crownauto.com for $47.96 with shipping. I also order the jack pad adapter from ecstuning.com so I do not wreck the new ones. oh, I will try the screwdriver method but the side trim on the car is very close to the jack point. I will most likely try to drill through the exsisting pad so that I can easily snap off the old one. __________________ EDC.....viagra for your car
	Appreciate 0 Quote

01-05-2009, 04:38 PM	#7
FrankoQ Deny everything 229 Rep 11,378 Posts Drives: 2006 330i; 2015 X6, S1000RR Join Date: Apr 2006 Location: Beautiful MD iTrader: (5) Garage List 2015 BMW X6 [0.00] 2006 330i [0.00]	did they break from lifting the car without the adapter? __________________ I need a drink
	Appreciate 0 Quote

01-06-2009, 11:37 AM	#8
JuniorDee Captain 78 Rep 610 Posts Drives: the speed limit Join Date: Apr 2007 Location: the land of brat and brotchen iTrader: (1)	basically. I was used the wrong kind of jack and parts of the points are crushed. Learned my lesson, i will replace and never have the problem again. I received the adapter in the mail yesterday, its very nice. Its machined from aluminum and painted black. __________________ EDC.....viagra for your car
	Appreciate 0 Quote

01-07-2009, 01:35 PM	#9
Dillusion is ross 26 Rep 190 Posts Drives: E90 Join Date: Nov 2008 Location: South Fl iTrader: (1)	I jacked my car up almost 6 times in one month, and my pads are beyond destroyed __________________
	Appreciate 0 Quote

01-07-2009, 03:06 PM	#10
JuniorDee Captain 78 Rep 610 Posts Drives: the speed limit Join Date: Apr 2007 Location: the land of brat and brotchen iTrader: (1)	the pad part # is 51 71 7 164 761 __________________ EDC.....viagra for your car
	Appreciate 0 Quote

01-09-2009, 04:19 PM	#14
chinoxs203 Major 126 Rep 1,368 Posts Drives: 08 E92 335xi AW Join Date: Oct 2007 Location: CT iTrader: (7)	these look a bit better? bavauto.com p/n: 51 71 8 268 885 __________________ FOR SALE: Dropbox - please
	Appreciate 0 Quote

01-12-2009, 12:12 PM	#15
JuniorDee Captain 78 Rep 610 Posts Drives: the speed limit Join Date: Apr 2007 Location: the land of brat and brotchen iTrader: (1)	i replaced 2 of the 4 jack points yesterday. I uesd a drill to drill through the plastic to removed the clips. It wasnt a 30sec job as I had hoped, it took a few minutes. I will post a few pic of the old and new jack points tomorrow. __________________ EDC.....viagra for your car
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search