DEbagded the car, bUT!!...theres a problem! HELP!!

jjhan85 · 08-06-2006, 08:33 PM

Ok...so i debadged my car...and i shoudl've done it RIGHT when i got it...but unfortunately its been many months!

I debagded it with the blow dryer technique and floss ( This is one way to do it i was told...)

So... the problem:mad:
I debagded the 325i, and.....theres a sun spot or whatever....you can see it say 325i when your in the light, because the paint around the letters been i nthe sun, so it seems that it is a bit faded from the where the letters were on...you guys see what i mean...?

NOW!!...ANOTHER!!!

As i was taking off the I, i got it off, but theres a this really hard little round peice of plastic.... about 2 mm in diamter. and and below that, is another, what seems to be another peice of plastic on where the I used to be....

I tried Goof off like, goo gone or whatever its called, and i sat there blowing drying my car...and its still on.... I dunno what to do? Should i take it to the body shop???

PLEASE HELP!!! ANYBODY!! it looks ........... weird....

andrew 330i · 08-06-2006, 08:39 PM

it sounds like you need to polish the area with some non-abrasive polish to aid.

ADHD · 08-06-2006, 08:41 PM

use goof off to rid the surface of any contaminants and then POLISH!

jjhan85 · 08-06-2006, 08:44 PM

what should i use to polish??? and if i polish it what will it to do the spot where the 325i used to be?

Thanks alot guys!

shimshimhada · 08-06-2006, 09:09 PM

I used an abrasive polish with my PC and it looks dandy. Poorboy's SSR 2.5 with an orange pad, then I followed with 1.0 on the same pad.

jjhan85 · 08-06-2006, 09:19 PM

ok....get some polish...gotcha....is that for only where i debagded my car? or can i use it anywhere? ALSO!!...can i get this poorboys SSR 2.5 with an orange pad anywhere? like Advanced auto parts or Auto Zone?

shimshimhada · 08-06-2006, 09:21 PM

Quote:

Originally Posted by jjhan85

ok....get some polish...gotcha....is that for only where i debagded my car? or can i use it anywhere? ALSO!!...can i get this poorboys SSR 2.5 with an orange pad anywhere? like Advanced auto parts or Auto Zone?

You have to order it online at autogeek.net, it's used for polishing the whole car, but I just used it to clear up the badge residue and dull area. You need a porter cable, which you can get at Lowes or something. Check out the detail section for more info.

tl_boy · 08-07-2006, 02:55 AM

you can probably use Meguiar's Soft Scrub. I think it works well.

BTW, I did not use Goo Gone, nor do I reccomend people using such harsh chemicals on their ride! I'm not a detail expert by ANY means, but I've used Goo Gone for years, and find it to be pretty strong.

You can just blow dry it, floss, and use a lot of water and a cotton rag to take the 'gum' off.

picus · 08-07-2006, 12:17 PM

Go to Pep boys, Autozone, whatever; grab a tube of Megauirs ScratchX. Apply.

Or wait and week and watch it go away on it's own.

mds82 · 08-07-2006, 02:10 PM

I debadged my friends 2000 TL and i just used a bit of polishing compound and it was good as new.

ga-bmwdrvr · 08-07-2006, 02:25 PM

Quote:

Originally Posted by picus

Go to Pep boys, Autozone, whatever; grab a tube of Megauirs ScratchX. Apply.

Or wait and week and watch it go away on it's own.

agree with the ScratchX since it is used by hand and you do not have a PC, it is a good polish

ashecnc · 08-07-2006, 02:29 PM

I removed mine on my black, I could also see the numbers still, I just got some wax I had, waxed it off a few times. I could still see dirt attach to it while driving. In about 2-3 days it was gone on its own.

jjhan85 · 08-08-2006, 08:47 AM

Thanks Alot for the input guys. unfortunately i had to bring it to the aut body shop and get it wet sanded and painted again, BECAUSE!! there was some glue on there, actual cement like glue so i couldn't get it off. This is so gay too, because when i first got the car, maybe like a couple weeks later the "i" started to peel off, so my father took it to the dealers when I was away, and i guess they decided to glue it...(idiots)

....I took it to another BMW dealership closer to me and told them about it, and THEY would have paid for it, HOWEVER since I....removed it...i had to pay for it, even though THEY kind of messed my shit up...very irritating, so now, i jsut dropped off my car at the auto body shop and gotta pay like, 35 bucks for paint, 40 bucks for body work ( they gotta sand it down) and like another 35 bucks for paint LAbor....AHHH!!! expensive...

but yea, none-the-less thank you guys for your input and such its good to have other peoples opinions and what not. Thanks again

JOYRIIDE1113 · 08-14-2006, 09:48 AM

It doesn;t matter what type of glue it is, any adhesive will breakdown when used with the right solvent. Wetsanding, repainting, or even buffing to remove adhesive is like using a canon to shoot a fly. No need...

Oh well.

tl_boy · 08-14-2006, 10:08 AM

Painting? what'd you do? debadging is like the easiest mod ever, how'd u mess up on that?

lol.

jjhan85 · 08-14-2006, 10:30 AM

well the "i" was falling off a couple weeks after i got it, and i should've jsut taken off the 325i then, but my dad saw it and brought it to BMW, and they GLUED it on....and it was lke cement glue. Usually its a double sided form tape, but instead i guess they decided to glue it so it wont fall off... thats why my stuff was all weird, but now its fine

08-06-2006, 08:33 PM	#1
jjhan85 J-Han 5 Rep 398 Posts Drives: BMW E90 325i jetblack Join Date: Mar 2006 Location: Maryland iTrader: (0) Garage List 2006 325i Sport Pac ... [0.00]	DEbagded the car, bUT!!...theres a problem! HELP!! Ok...so i debadged my car...and i shoudl've done it RIGHT when i got it...but unfortunately its been many months! I debagded it with the blow dryer technique and floss ( This is one way to do it i was told...) So... the problem:mad: I debagded the 325i, and.....theres a sun spot or whatever....you can see it say 325i when your in the light, because the paint around the letters been i nthe sun, so it seems that it is a bit faded from the where the letters were on...you guys see what i mean...? NOW!!...ANOTHER!!! As i was taking off the I, i got it off, but theres a this really hard little round peice of plastic.... about 2 mm in diamter. and and below that, is another, what seems to be another peice of plastic on where the I used to be.... I tried Goof off like, goo gone or whatever its called, and i sat there blowing drying my car...and its still on.... I dunno what to do? Should i take it to the body shop??? PLEASE HELP!!! ANYBODY!! it looks ........... weird.... __________________ 325i // Sport Package // 6 speed manual // AFE intake // Resonator + Muffler Delete // 20% tints//
	Appreciate 0 Tweet Quote

08-06-2006, 08:39 PM	#2
andrew 330i it can never be too clean... 166 Rep 1,100 Posts Drives: 2014 F31 M Sport Wagon Join Date: Apr 2006 Location: columbus, ohio iTrader: (1)	it sounds like you need to polish the area with some non-abrasive polish to aid. __________________ '14 328xi wagon / m sport / white / red leather kw v1 coilover kit / 19" staggered 351 M double spoke wheels / upper strut bar / sport line grille & exhaust tips / 50% tint / painted reflectors / debadged / complete clear bra
	Appreciate 0 Quote

08-06-2006, 08:41 PM	#3
ADHD Brigadier General 254 Rep 4,201 Posts Drives: F30 328i Join Date: Apr 2006 Location: Magic Mountain iTrader: (38) Garage List 21 M540i [0.00] 07 e90 335 [0.00]	use goof off to rid the surface of any contaminants and then POLISH! __________________
	Appreciate 0 Quote

08-06-2006, 08:44 PM	#4
jjhan85 J-Han 5 Rep 398 Posts Drives: BMW E90 325i jetblack Join Date: Mar 2006 Location: Maryland iTrader: (0) Garage List 2006 325i Sport Pac ... [0.00]	what should i use to polish??? and if i polish it what will it to do the spot where the 325i used to be? Thanks alot guys! __________________ 325i // Sport Package // 6 speed manual // AFE intake // Resonator + Muffler Delete // 20% tints//
	Appreciate 0 Quote

08-06-2006, 09:09 PM	#5
shimshimhada Brigadier General 502 Rep 4,838 Posts Drives: Portal Join Date: Jul 2005 Location: Portal iTrader: (2)	I used an abrasive polish with my PC and it looks dandy. Poorboy's SSR 2.5 with an orange pad, then I followed with 1.0 on the same pad.
	Appreciate 0 Quote

08-06-2006, 09:19 PM	#6
jjhan85 J-Han 5 Rep 398 Posts Drives: BMW E90 325i jetblack Join Date: Mar 2006 Location: Maryland iTrader: (0) Garage List 2006 325i Sport Pac ... [0.00]	ok....get some polish...gotcha....is that for only where i debagded my car? or can i use it anywhere? ALSO!!...can i get this poorboys SSR 2.5 with an orange pad anywhere? like Advanced auto parts or Auto Zone? __________________ 325i // Sport Package // 6 speed manual // AFE intake // Resonator + Muffler Delete // 20% tints//
	Appreciate 0 Quote

08-07-2006, 02:55 AM	#8
tl_boy Major 89 Rep 1,329 Posts Drives: tl Join Date: Aug 2005 Location: houston iTrader: (0)	you can probably use Meguiar's Soft Scrub. I think it works well. BTW, I did not use Goo Gone, nor do I reccomend people using such harsh chemicals on their ride! I'm not a detail expert by ANY means, but I've used Goo Gone for years, and find it to be pretty strong. You can just blow dry it, floss, and use a lot of water and a cotton rag to take the 'gum' off. __________________ E90 Mods (work in progress): Euro Xenon Headlamps, 19" ASA AR-1's with Toyo T1R 235 fronts and 275 rears, Breyton style front spoiler, Breyton style rear spoiler, Huper Optik 40% Tint, TiAG with Black 'ette and Aluminum trim, Chrome grills, chrome exhaust, Hartge lowering springs, PMB Hyperwhites.
	Appreciate 0 Quote

08-07-2006, 12:17 PM	#9
picus Brigadier General 127 Rep 4,172 Posts Drives: e92 SG 335i Coupe Join Date: Jun 2006 Location: Toronto, ON iTrader: (0)	Go to Pep boys, Autozone, whatever; grab a tube of Megauirs ScratchX. Apply. Or wait and week and watch it go away on it's own.
	Appreciate 0 Quote

08-07-2006, 02:10 PM	#10
mds82 Major General 381 Rep 5,842 Posts Drives: 2006 325xi Join Date: Aug 2005 Location: South Central Connecticut iTrader: (40) Garage List 2006 325xi Snow Pics [0.00] 2006 BMW 325xi [0.00]	I debadged my friends 2000 TL and i just used a bit of polishing compound and it was good as new.
	Appreciate 0 Quote

08-07-2006, 02:29 PM	#12
ashecnc In the delivery business :) 26 Rep 991 Posts Drives: '06 325i Jet Black/Black Join Date: Dec 2005 Location: Asheville, NC (mountains) Blue Ridge Parkway iTrader: (1) Garage List 2006 325i [0.00] 2006 325i [0.00]	I removed mine on my black, I could also see the numbers still, I just got some wax I had, waxed it off a few times. I could still see dirt attach to it while driving. In about 2-3 days it was gone on its own. __________________ Born 10/05 '06 325i Jet Black, Black, Sport Package, Xenon's, Heated Seats & Power, Sat. Prep, Rear Spoiler, Chrome Tips, Blacklines, Chrome Grills, 19" M5 wheels NO MORE run flats, drives like a dream now
	Appreciate 0 Quote

08-08-2006, 08:47 AM	#13
jjhan85 J-Han 5 Rep 398 Posts Drives: BMW E90 325i jetblack Join Date: Mar 2006 Location: Maryland iTrader: (0) Garage List 2006 325i Sport Pac ... [0.00]	Thanks Alot for the input guys. unfortunately i had to bring it to the aut body shop and get it wet sanded and painted again, BECAUSE!! there was some glue on there, actual cement like glue so i couldn't get it off. This is so gay too, because when i first got the car, maybe like a couple weeks later the "i" started to peel off, so my father took it to the dealers when I was away, and i guess they decided to glue it...(idiots) ....I took it to another BMW dealership closer to me and told them about it, and THEY would have paid for it, HOWEVER since I....removed it...i had to pay for it, even though THEY kind of messed my shit up...very irritating, so now, i jsut dropped off my car at the auto body shop and gotta pay like, 35 bucks for paint, 40 bucks for body work ( they gotta sand it down) and like another 35 bucks for paint LAbor....AHHH!!! expensive... but yea, none-the-less thank you guys for your input and such its good to have other peoples opinions and what not. Thanks again __________________ 325i // Sport Package // 6 speed manual // AFE intake // Resonator + Muffler Delete // 20% tints//
	Appreciate 0 Quote

08-14-2006, 09:48 AM	#14
JOYRIIDE1113 Pirate 130 Rep 1,395 Posts Drives: Detailing Shark Join Date: Nov 2005 Location: Miami-Kendall iTrader: (1)	It doesn;t matter what type of glue it is, any adhesive will breakdown when used with the right solvent. Wetsanding, repainting, or even buffing to remove adhesive is like using a canon to shoot a fly. No need... Oh well.
	Appreciate 0 Quote

08-14-2006, 10:08 AM	#15
tl_boy Major 89 Rep 1,329 Posts Drives: tl Join Date: Aug 2005 Location: houston iTrader: (0)	Painting? what'd you do? debadging is like the easiest mod ever, how'd u mess up on that? lol. __________________ E90 Mods (work in progress): Euro Xenon Headlamps, 19" ASA AR-1's with Toyo T1R 235 fronts and 275 rears, Breyton style front spoiler, Breyton style rear spoiler, Huper Optik 40% Tint, TiAG with Black 'ette and Aluminum trim, Chrome grills, chrome exhaust, Hartge lowering springs, PMB Hyperwhites.
	Appreciate 0 Quote

08-14-2006, 10:30 AM	#16
jjhan85 J-Han 5 Rep 398 Posts Drives: BMW E90 325i jetblack Join Date: Mar 2006 Location: Maryland iTrader: (0) Garage List 2006 325i Sport Pac ... [0.00]	well the "i" was falling off a couple weeks after i got it, and i should've jsut taken off the 325i then, but my dad saw it and brought it to BMW, and they GLUED it on....and it was lke cement glue. Usually its a double sided form tape, but instead i guess they decided to glue it so it wont fall off... thats why my stuff was all weird, but now its fine __________________ 325i // Sport Package // 6 speed manual // AFE intake // Resonator + Muffler Delete // 20% tints//
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search