Delete thanks

jeho · 03-02-2009, 03:12 PM

Delete thanks

Sal@AUTOcouture · 03-02-2009, 03:31 PM

The STi is cake compared to the 335

NatesGr8 · 03-02-2009, 03:38 PM

Quote:

Originally Posted by AutoCouture

The STi is cake compared to the 335

+100 STI/WRX/Legacy is cake compared to the 335.

Nate

Dan335i · 03-02-2009, 05:52 PM

The Evo dp install compared to the 335i could be done blindfolded.I did the DP,s on my Evo.s on a lift in a half hour taking my time.From what i have been reading about the DP install on the BMW there is no comparison.Much easier on the Evo,s and Subys.

Jet335i · 03-02-2009, 05:57 PM

+1...dp on evo is cake...the entire exhaust is cake.

jonerik26 · 03-02-2009, 06:02 PM

i helped my cousin do his on STI... and compared to the 335i.. its way way more simple... more space.once a few things are out of the way... and not too much work under the car

A418t81 · 03-02-2009, 07:04 PM

Evo is much easier, just a couple bolts and it fall out the bottom of the car. The 335 took me 3-4 hours the first time on a lift just taking my time and poking around down there while I had a lot of the hardware out of the way.

sd390r · 03-02-2009, 10:33 PM

evo and sti both 100x easier than it was on the bimmer

Sniz · 03-02-2009, 10:50 PM

never done it on a STI or evo...but the 335 was not fun.

jeho · 03-02-2009, 10:53 PM

so could you say that more than 50% of the TOTAL INSTALL TIME would be trying to get the V-band clamps on each of the DP?

so removing stock DP is not time consuming but having to CLAMP IT ON is whats takes the longest?

Turkishexpress · 03-03-2009, 12:02 AM

Evo DP is the easiest thanks to the simplicity of just two spring bolts and no under body work. Well at least for those of us that take it off an throw it away

Sti is a little bit of a hassle since taking the stock piece off is a PIDA. Too many heat shields and one of the bolts is hard as hell to get to. It shouldn't take more than 2 hours for a novice though.

From what I heard from a couple of shops that have done the 335 install (these were mainly evo/sti/240sx/2jz shops), they said that it is a bitch thanks to all the shit you gotta take off and tight tolerances.

03-02-2009, 03:12 PM	#1
jeho ig: jeffersonho 158 Rep 2,187 Posts Drives: E90M3.E36M3 Join Date: Mar 2008 Location: PNW iTrader: (6)	Delete thanks Delete thanks __________________ E36 M3 on TE37SL E90 M3 on TE37SL http://instagram.com/jeffersonho Last edited by jeho; 03-03-2009 at 10:49 AM..
	Appreciate 0 Tweet Quote

03-02-2009, 03:31 PM	#2
Sal@AUTOcouture 752 Rep 10,100 Posts Drives: E93 M3, E36 M3 Join Date: Feb 2007 Location: Sofla iTrader: (30)	The STi is cake compared to the 335
	Appreciate 0 Quote

03-02-2009, 05:52 PM	#4
Dan335i Lieutenant Colonel 33 Rep 1,786 Posts Drives: 07 335i coupe 6MT,w/sp. pack. Join Date: Oct 2007 Location: orange county NY iTrader: (2)	The Evo dp install compared to the 335i could be done blindfolded.I did the DP,s on my Evo.s on a lift in a half hour taking my time.From what i have been reading about the DP install on the BMW there is no comparison.Much easier on the Evo,s and Subys.
	Appreciate 0 Quote

03-02-2009, 05:57 PM	#5
Jet335i Major 188 Rep 1,083 Posts Drives: '21 F96 X6MC, '11 E92 M3 Join Date: Apr 2008 Location: NJ iTrader: (5)	+1...dp on evo is cake...the entire exhaust is cake. __________________ Insta: @blurplem3
	Appreciate 0 Quote

03-02-2009, 06:02 PM	#6
jonerik26 Lieutenant Colonel 60 Rep 1,913 Posts Drives: black 335i e90 PRE-LCI Join Date: Apr 2006 Location: somewhere iTrader: (23) Garage List 2007 335i [8.00] 1998 Acura Integra [8.50] 2006 325i [8.00]	i helped my cousin do his on STI... and compared to the 335i.. its way way more simple... more space.once a few things are out of the way... and not too much work under the car __________________
	Appreciate 0 Quote

03-02-2009, 07:04 PM	#7
A418t81 Lieutenant Colonel 395 Rep 1,540 Posts Drives: Ever changing fleet Join Date: May 2007 Location: Alabama iTrader: (1) Garage List 2013 335is [0.00]	Evo is much easier, just a couple bolts and it fall out the bottom of the car. The 335 took me 3-4 hours the first time on a lift just taking my time and poking around down there while I had a lot of the hardware out of the way. __________________ 23 IOMG G80 CX, 23 iX M60, 24 GT3RS PTS Weissach, 24 RS E-tron GT, 24 Cybertruck
	Appreciate 0 Quote

03-02-2009, 10:33 PM	#8
sd390r Lieutenant Colonel 66 Rep 1,654 Posts Drives: AW M3 Join Date: Aug 2008 Location: North Jersey iTrader: (9) Garage List 2008 E90 335i [0.00]	evo and sti both 100x easier than it was on the bimmer __________________ 2008 E90 M3 - Sold 2006 Evo IX SE - Sold 2008 E90 335i - Sold
	Appreciate 0 Quote

03-02-2009, 10:50 PM	#9
Sniz Lieutenant General 715 Rep 10,584 Posts Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD iTrader: (1)	never done it on a STI or evo...but the 335 was not fun. __________________
	Appreciate 0 Quote

03-02-2009, 10:53 PM	#10
jeho ig: jeffersonho 158 Rep 2,187 Posts Drives: E90M3.E36M3 Join Date: Mar 2008 Location: PNW iTrader: (6)	so could you say that more than 50% of the TOTAL INSTALL TIME would be trying to get the V-band clamps on each of the DP? so removing stock DP is not time consuming but having to CLAMP IT ON is whats takes the longest? __________________ E36 M3 on TE37SL E90 M3 on TE37SL http://instagram.com/jeffersonho
	Appreciate 0 Quote

03-03-2009, 12:02 AM	#11
Turkishexpress Gixxer Man 14 Rep 599 Posts Drives: '08 335i E90 / '06 Range HSE Join Date: Aug 2008 Location: Tysons/Sterling, VA iTrader: (2)	Evo DP is the easiest thanks to the simplicity of just two spring bolts and no under body work. Well at least for those of us that take it off an throw it away Sti is a little bit of a hassle since taking the stock piece off is a PIDA. Too many heat shields and one of the bolts is hard as hell to get to. It shouldn't take more than 2 hours for a novice though. From what I heard from a couple of shops that have done the 335 install (these were mainly evo/sti/240sx/2jz shops), they said that it is a bitch thanks to all the shit you gotta take off and tight tolerances. __________________ Stable: 2008 E90 335i JB3 etc..., 2006 Range Rover HSE, K7 GSX-R 600 Former Stable: 2008 MB C300, 2007 Chevy Avalanche, 2006 Evo IX (544awhp), 2005 Sti, 2003 Evo...
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search