Problem with installation Active Autowerke Processor. Help

p996c2 · 03-31-2009, 12:22 PM

Hi Board,

I just installed the A.A.P. skipping step 13-16 in their manual (since I have
the post 29.2 software) and keeping the solenoid in standard configuration.

I double checked everything and started the car.....

Then the idrive screen gave the following info (see pictures).

So I thought I de-install the A.A.P. again. Still the same screens after de-install, also the airbag light pops-up, what did I do wrong?

I have no tools for reading codes....

Thanks in advance!

P996C2

rooster3.0 · 03-31-2009, 04:07 PM

Re-check all your wiring and make sure the connectors and subconnectors are all seated properly.

03-31-2009, 12:22 PM	#1
p996c2 New Member 2 Rep 22 Posts Drives: 318IS E30/335I E92/Alpina B5 Join Date: Sep 2006 Location: Netherlands & Switzerland iTrader: (0)	Problem with installation Active Autowerke Processor. Help Hi Board, I just installed the A.A.P. skipping step 13-16 in their manual (since I have the post 29.2 software) and keeping the solenoid in standard configuration. I double checked everything and started the car..... Then the idrive screen gave the following info (see pictures). So I thought I de-install the A.A.P. again. Still the same screens after de-install, also the airbag light pops-up, what did I do wrong? I have no tools for reading codes.... Thanks in advance! P996C2 Attached Images
	Appreciate 0 Tweet Quote

03-31-2009, 04:07 PM	#2
rooster3.0 Major 27 Rep 1,306 Posts Drives: E92 335i Join Date: Nov 2006 Location: Jersey iTrader: (4)	Re-check all your wiring and make sure the connectors and subconnectors are all seated properly. __________________ Train with your head; not above it.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search