[ydrive55]

So I go to my car yesterday after leaving a shopping mall and my remote will not open the doors to my car, but will lock them, and open the trunk. I had been using the car all morning with no problem.

I take the actual key out and use it to open my door and I notice right away that my seat is now in a completely different position. When I finally turn on my car, it seems like the battery has been disconnected as my electronics seem to be all reset back to OEM. Also my navigation is not working at all.

I re-adjusted my seat and headed off. The car seems to be running ok, but I really didn't get a chance to put it through it's paces, as I had my wife and her friend with me. I will do that today.

However my key continues not to open the doors, and my power locks inside the car do not work as either. I tried my second key and it doesn't work either. So basically... does anyone have any idea's as to what may have happened.

Three things I can say upfront...

1. I just installed a JB+ about 3 weeks ago and I am running it at 75% with no solenoid bypass.

2. I have a K/N Air Filter with no other air flow mods done.

3. I use a "Back Up" copy of my 2009 navigation disk to make sure not to scratch "MY" original one.

I know there is a big meet today which I intended to go to, but I do not trust the car 50+ miles away from home. I am hoping that I might hook up with someone who has the Bav-tech scan tool to read/clear any codes, and get some assistance removing my JB+ as I am not experienced in doing so, and am not very mechanically inclined.

Any input is welcome

Thanks,

[Macho Torque]

this has happened to me a couple times the door things its a blown fuse the fuse box is behind the glove i jus dont remember which one u have to change but u can see by the manual they have there

[ydrive55]

Shameless bump...

I have to bring my car to the stealer-ship today and I was hoping to find someone with a Bav Tech tool to scan and clear with, and also a second pair of hands to help me pull my JB+. I am not very mechanically inclined. I would be interested in partnering on a Bav Tech tool with someone that has an empty vin spot so please let me know.

Thanks

[Alex@AKMotorwerk]

Originally Posted by ydrive55

Shameless bump...

I have to bring my car to the stealer-ship today and I was hoping to find someone with a Bav Tech tool to scan and clear with, and also a second pair of hands to help me pull my JB+. I am not very mechanically inclined. I would be interested in partnering on a Bav Tech tool with someone that has an empty vin spot so please let me know.

Thanks

I'm out in central NJ and can scan your car with the BT tool... shoot me a PM if interested.

Thanks

[fizzle]

the jb+ should have a problem. what i would do first is disconnect the battery for a few seconds, let everything reset. see what happens. then if you cant figure it out bring it by alex.