Warning lights after battery disconnection?

Holjon · 12-03-2008, 05:46 PM

Hi guys, I fitted my new steering wheel today (BMW Performance one) and in doing so had to disconnect the battery for around two hours.

Anyway, when everything was back together, all seemed well until driving up the road, the DSC light flashed a couple of times and then stayed on with a message indicating a system failure for the DSC, DBC and Tyre pressure monitor....

Question is, have I made a meal of the wiring, or is this normal when the battery is disconnected for a long while? If so, will it just be a simple plug into the BMW service gizmo to clear the errors and I'll be on my way?

Thanks

SoCalTech · 12-03-2008, 06:14 PM

You need to have the steering angle sensor re-initialized most likely.

E92 LeMans · 12-10-2008, 02:35 PM

Try turning steering lock to lock a couple of time normally does trick

twincam · 03-16-2010, 04:38 PM

Hello Holjon,

What did you do to solve this DBC-DSC-TYRE failure?
I disconnected the battery and took the steeringwheel off my E91.
After reinstalling the same problem: DBC-DSC-TYRE failure.

What can I do?

No idea how to send you a PM otherwise I would have doen that.

Thanks!

Dr Dave · 03-17-2010, 05:56 PM

Shame, the OP is never to be seen again on this thread!

zltm089 · 03-17-2010, 07:45 PM

Quote:

Originally Posted by Dr Dave

Shame, the OP is never to be seen again on this thread!

what happened?

SiKkBaSs · 03-17-2010, 09:51 PM

Quote:

Originally Posted by zltm089

what happened?

Funny quip??

Faulty steering wheel + Thread is 2 years old...go figure

NFS · 03-18-2010, 04:02 AM

Quote:

Originally Posted by SiKkBaSs

Funny quip??

Faulty steering wheel + Thread is 2 years old...go figure

I presume he is still going round in circles somewhere.

12-03-2008, 05:46 PM	#1
Holjon Private 15 Rep 80 Posts Drives: GT3 RS Join Date: Nov 2007 Location: North Devon iTrader: (0)	Warning lights after battery disconnection? Hi guys, I fitted my new steering wheel today (BMW Performance one) and in doing so had to disconnect the battery for around two hours. Anyway, when everything was back together, all seemed well until driving up the road, the DSC light flashed a couple of times and then stayed on with a message indicating a system failure for the DSC, DBC and Tyre pressure monitor.... Question is, have I made a meal of the wiring, or is this normal when the battery is disconnected for a long while? If so, will it just be a simple plug into the BMW service gizmo to clear the errors and I'll be on my way? Thanks
	Appreciate 0 Tweet Quote

12-03-2008, 06:14 PM	#2
SoCalTech Captain 24 Rep 648 Posts Drives: Not a BMW yet... Join Date: Oct 2008 Location: Redondo Beach, Ca iTrader: (0)	You need to have the steering angle sensor re-initialized most likely.
	Appreciate 0 Quote

12-10-2008, 02:35 PM	#3
E92 LeMans Second Lieutenant 10 Rep 296 Posts Drives: E92 330d M Sport Join Date: Dec 2008 Location: London iTrader: (0) Garage List 2014 M235i [0.00] 2007 330d M Sport [0.00]	Try turning steering lock to lock a couple of time normally does trick
	Appreciate 0 Quote

03-16-2010, 04:38 PM	#4
twincam Registered 0 Rep 1 Posts Drives: 320D-E91 Join Date: Mar 2010 Location: NL iTrader: (0)	Same problem Hello Holjon, What did you do to solve this DBC-DSC-TYRE failure? I disconnected the battery and took the steeringwheel off my E91. After reinstalling the same problem: DBC-DSC-TYRE failure. What can I do? No idea how to send you a PM otherwise I would have doen that. Thanks!
	Appreciate 0 Quote

03-17-2010, 05:56 PM	#5
Dr Dave Zummerzet Zyder Drinker! 119 Rep 5,541 Posts Drives: '06 330D Le Mans Blue Join Date: May 2009 Location: Somerset iTrader: (3) Garage List 2006 330d M Sport [0.00]	Shame, the OP is never to be seen again on this thread! __________________
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search