Phantom Missfires,2,000 miles on plugs.

rbaldwin28 · 04-10-2010, 02:09 AM

I just took my car in and got new turbos about 1,000 miles ago and my plugs are new 2,000 miles ago. I still get miss fire cylinder 5 and 6 when over 6000rpm or at the shift with limp mode. Today I returned the car to stock ( removed Procede and DCI)and I have no prob so far even WOT from 3rd th 4th. When I removed my cone filter closest to the nose of the car I noticed the pipe the is made of plastic that runs to the turbo was loose and the two bolts that hold it on were hanging by just a thread literally. Could this cause miss-fires?Any other Ideas?
I run procede v4 2-23 maps stage 2. At the time of the first miss-fire I was running 50%UT and 0 Ignition Correction.

onefastman · 04-10-2010, 08:11 AM

Could be coil related or injector. Swap the coils around and see what happend to isolate the issue.

dzenno · 04-10-2010, 08:49 AM

Coils, pretty sure..no misfires on stock tune as you're not pushing it as hard

rbaldwin28 · 04-10-2010, 09:21 PM

I get cylinder 5 and 6 miss-fires. Does it matter what two coils I switch?

AltecBX · 04-10-2010, 09:31 PM

I'd wait for new maps for the v4.
In the meantime I try stage 1 to see if that will help.

rbaldwin28 · 04-10-2010, 09:49 PM

Quote:

Originally Posted by AltecBX

I'd wait for new maps for the v4.
In the meantime I try stage 1 to see if that will help.

Yea I was thinking of tying that. I wish I had known the valet mode is pretty much stock I would not have had to take the procede off. I can remove it in about 30 min now and put it back on in like 40

rbaldwin28 · 04-15-2010, 09:02 PM

Just an Update: I reinstalled the procede and have run as high as 80% UT at 100 IC on stage 2 with no limp

. The intake pipe is fixed and I have not put the DCI back on yet but for now it runs great even with the 2AAF fuel pump code I got.

04-10-2010, 02:09 AM	#1
rbaldwin28 Lieutenant 15 Rep 408 Posts Drives: E92 335i Sport Prem. White Join Date: Aug 2009 Location: Carlsbad CA and San Diego CA iTrader: (0) Garage List 2007 335I [0.00]	Phantom Missfires,2,000 miles on plugs. I just took my car in and got new turbos about 1,000 miles ago and my plugs are new 2,000 miles ago. I still get miss fire cylinder 5 and 6 when over 6000rpm or at the shift with limp mode. Today I returned the car to stock ( removed Procede and DCI)and I have no prob so far even WOT from 3rd th 4th. When I removed my cone filter closest to the nose of the car I noticed the pipe the is made of plastic that runs to the turbo was loose and the two bolts that hold it on were hanging by just a thread literally. Could this cause miss-fires?Any other Ideas? I run procede v4 2-23 maps stage 2. At the time of the first miss-fire I was running 50%UT and 0 Ignition Correction.
	Appreciate 0 Tweet Quote

04-10-2010, 08:11 AM	#2
onefastman Major General 163 Rep 5,689 Posts Drives: 2009 135i 2011 e92m dct Join Date: Sep 2009 Location: Earth iTrader: (15)	Could be coil related or injector. Swap the coils around and see what happend to isolate the issue. __________________ Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(1addicts.com or any affiliated or nonaffiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
	Appreciate 0 Quote

04-10-2010, 08:49 AM	#3
dzenno Banned 287 Rep 5,876 Posts Drives: Join Date: Feb 2006 iTrader: (1)	Coils, pretty sure..no misfires on stock tune as you're not pushing it as hard
	Appreciate 0 Quote

04-10-2010, 09:21 PM	#4
rbaldwin28 Lieutenant 15 Rep 408 Posts Drives: E92 335i Sport Prem. White Join Date: Aug 2009 Location: Carlsbad CA and San Diego CA iTrader: (0) Garage List 2007 335I [0.00]	I get cylinder 5 and 6 miss-fires. Does it matter what two coils I switch?
	Appreciate 0 Quote

04-10-2010, 09:31 PM	#5
AltecBX Colonel 341 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	I'd wait for new maps for the v4. In the meantime I try stage 1 to see if that will help. __________________ 335xi Sedan 6AT \| Weather(70-85°F) \| N54 Tune Comparison Chart \|\| N54 Turbo Upgrade Comparison Chart -PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps) †Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 \| 0-60 in 4.0sec \|\| †Cobb E30 LT (35% Ethanol/65% 93 Octane) \| 0-60 in 3.9sec AR Design Catless DP \| BMS DCI + OCC \| ETS 5 FMIC \| Alpina B3 Trans Flash \|235/265 19" Michelin PSS
	Appreciate 0 Quote

04-15-2010, 09:02 PM	#7
rbaldwin28 Lieutenant 15 Rep 408 Posts Drives: E92 335i Sport Prem. White Join Date: Aug 2009 Location: Carlsbad CA and San Diego CA iTrader: (0) Garage List 2007 335I [0.00]	Just an Update: I reinstalled the procede and have run as high as 80% UT at 100 IC on stage 2 with no limp. The intake pipe is fixed and I have not put the DCI back on yet but for now it runs great even with the 2AAF fuel pump code I got.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search