AR Design 3" DP Ebay Reps. Pay or nay?

Ofmalik · 04-10-2010, 06:22 AM

Does anyone have any experience with these: http://cgi.ebay.com/ebaymotors/BMW-1...Q5fAccessories?

I'm having a tough time ignoring them.. at that price they're almost worth buying just to try them out. What do you guys think?

e.n335 · 04-10-2010, 06:50 AM

Quote:

Originally Posted by ofmalik

Does anyone have any experience with these: http://cgi.ebay.com/ebaymotors/BMW-1...Q5fAccessories?

I'm having a tough time ignoring them.. at that price they're almost worth buying just to try them out. What do you guys think?

BB downpipes have already been discussed here. Just

.

onefastman · 04-10-2010, 08:10 AM

Ya and they actually had a gb on n54tech for $425 shipped

mkPOTO · 04-10-2010, 11:29 AM

yup search

Snertz · 04-10-2010, 12:04 PM

I have a set on my car, for the money they can't be beat. Fantastic build quality and fitment

Tiago@VRSF · 04-10-2010, 12:16 PM

From what I read they are ex-AR design employees that are making them. Their first production run had fitment issues on 335i's but they fixed that a little while ago.

Flea7 · 04-10-2010, 01:53 PM

Quote:

Originally Posted by ofmalik

Does anyone have any experience with these: http://cgi.ebay.com/ebaymotors/BMW-1...Q5fAccessories?

I'm having a tough time ignoring them.. at that price they're almost worth buying just to try them out. What do you guys think?

don't forget the 8% discount with bing on buy it now!

JBiddy · 04-10-2010, 03:18 PM

BB is pretty awesome... the quality on this dps is amazing. i have a friend that has them in his 135i and he has nothing but good things to say about them...

klipseracer · 04-10-2010, 04:30 PM

Justin is a great guy.

Ofmalik · 04-11-2010, 08:29 PM

Thanks for all the feedback guys, I was worried about fitment more than anything else. I too had heard the first batch was a little off, more recent buyers say there are very minor issues: roughly 1.5in short and 2degrees off from mounting flush

Quote:

Originally Posted by klipseracer

Justin is a great guy.

Hahah what?

cn555ic · 04-11-2010, 08:46 PM

Quote:

Originally Posted by ofmalik

Thanks for all the feedback guys, I was worried about fitment more than anything else. I too had heard the first batch was a little off, more recent buyers say there are very minor issues: roughly 1.5in short and 2degrees off from mounting flush

Hahah what?

1.5 inch short and 2 degrees off is not minor my friend if this is the case...There is literally no margin of error when fabricating two 3 inch piping for such a limited space...I would tread carefully if this is the case from what you have heard and researched about these pipes...I can tell you AR pipes the jigs on them have not changed at all and the fitment is perfect...

klipseracer · 04-11-2010, 09:09 PM

Quote:

Originally Posted by ofmalik

Thanks for all the feedback guys, I was worried about fitment more than anything else. I too had heard the first batch was a little off, more recent buyers say there are very minor issues: roughly 1.5in short and 2degrees off from mounting flush

Hahah what?

Its been resolved regardless. I doubt AR's first set of pipes were perfect.

Justin is the guy who does the welding for BB Fab.

Tiago@VRSF · 04-11-2010, 09:35 PM

The new pipes have resolved fitment. Those were the initial fitment problems.

ramair311 · 04-11-2010, 11:15 PM

I recently had these BB DPs installed on my 1er and am one very happy customer. After much research, the price for the quality was unmatched. Any very early fitting issues have long been resolved.....

Ofmalik · 04-16-2010, 02:57 PM

Just received them today: the welding is up to par in comparison to the AR Dps I've seen in person. The welds are actually cleaner and more precise than what I've seen in pics of other BBs.

At the end of the day it's not AR quality, and doesn't hold the AR resale value, BUT its still $500 great and will do the job. Props Justin

I'll let you guys know about the fitment

04-10-2010, 06:22 AM	#1
Ofmalik Major 153 Rep 1,430 Posts Drives: 335is Join Date: Dec 2009 Location: Bay Area, California iTrader: (43)	AR Design 3" DP Ebay Reps. Pay or nay? Does anyone have any experience with these: http://cgi.ebay.com/ebaymotors/BMW-1...Q5fAccessories? I'm having a tough time ignoring them.. at that price they're almost worth buying just to try them out. What do you guys think? Last edited by Ofmalik; 04-10-2010 at 06:36 AM..
	Appreciate 0 Tweet Quote

04-10-2010, 08:10 AM	#3
onefastman Major General 163 Rep 5,689 Posts Drives: 2009 135i 2011 e92m dct Join Date: Sep 2009 Location: Earth iTrader: (15)	Ya and they actually had a gb on n54tech for $425 shipped __________________ Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(1addicts.com or any affiliated or nonaffiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
	Appreciate 0 Quote

04-10-2010, 11:29 AM	#4
mkPOTO Mr. Nice Says Hello 650 Rep 16,661 Posts Drives: BMW M3 \| X5 xdrive 35i MSport Join Date: Dec 2008 Location: USA iTrader: (25) Garage List 2002 Lexus GS300 [0.00] 2008 BMW E92 M3 [5.58]	yup search
	Appreciate 0 Quote

04-10-2010, 12:04 PM	#5
Snertz H O O N 89 Rep 696 Posts Drives: ein M! Join Date: Oct 2008 Location: NY iTrader: (9)	I have a set on my car, for the money they can't be beat. Fantastic build quality and fitment __________________ U WOT M8?
	Appreciate 0 Quote

04-10-2010, 12:16 PM	#6
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	From what I read they are ex-AR design employees that are making them. Their first production run had fitment issues on 335i's but they fixed that a little while ago.
	Appreciate 0 Quote

04-10-2010, 03:18 PM	#8
JBiddy Brigadier General 202 Rep 3,840 Posts Drives: F82 ///M Join Date: Apr 2008 Location: Northern/N.J iTrader: (9)	BB is pretty awesome... the quality on this dps is amazing. i have a friend that has them in his 135i and he has nothing but good things to say about them... __________________ ///M
	Appreciate 0 Quote

04-10-2010, 04:30 PM	#9
klipseracer Banned 228 Rep 3,012 Posts Drives: 2007 E90 335i, 05 E46 330i Join Date: Aug 2009 Location: Arizona iTrader: (27) Garage List 2007 335i [0.00] 2005 330i [0.00]	Justin is a great guy.
	Appreciate 0 Quote

04-11-2010, 09:35 PM	#13
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	The new pipes have resolved fitment. Those were the initial fitment problems.
	Appreciate 0 Quote

04-11-2010, 11:15 PM	#14
ramair311 Second Lieutenant 61 Rep 269 Posts Drives: M235i Join Date: May 2008 Location: Denver iTrader: (2)	I recently had these BB DPs installed on my 1er and am one very happy customer. After much research, the price for the quality was unmatched. Any very early fitting issues have long been resolved.....
	Appreciate 0 Quote

04-16-2010, 02:57 PM	#15
Ofmalik Major 153 Rep 1,430 Posts Drives: 335is Join Date: Dec 2009 Location: Bay Area, California iTrader: (43)	Just received them today: the welding is up to par in comparison to the AR Dps I've seen in person. The welds are actually cleaner and more precise than what I've seen in pics of other BBs. At the end of the day it's not AR quality, and doesn't hold the AR resale value, BUT its still $500 great and will do the job. Props Justin I'll let you guys know about the fitment
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search