|
|
|
|
 |
 |
 |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
 |
|
BMW 3-Series (E90 E92) Forum
>
Square setup for track - 18x9 et 26 with 245/40 tire for front
|
 |
| 05-29-2010, 08:28 AM | #1 |
|
Lieutenant Colonel
 90
Rep 1,523
Posts |
Square setup for track - 18x9 et 26 with 245/40 tire for front
Can anyone confirm this will work? Square setup
__________________
 2002 Laguna Seca Blue E46 M3 6MT 2017 White C63 AMG Coupe 2002 Oxford Green E46 M3 6MT - Sold |
| 05-29-2010, 01:17 PM | #2 |
|
Ground Clearance?
299
Rep 1,726
Posts |
it should, id suggest a 10mm spacer in the rear because the fronts will be really flush but the rears will not at et26
__________________
 E90 330i sold, E30 325i, E90 335i rip, E92 335i rip, E39 530i sold, E34 525i sold, E34 540i, F15 X5 35i |
|
Appreciate
0
|
| 05-29-2010, 04:10 PM | #3 |
|
Lieutenant Colonel
90
Rep 1,523
Posts |
Okay I test fitted them. The front tires rub the plastic fender liner at a full turn. What size front tires do you think I should run to eliminate this rubbing? I was thinking 235/35/18 or 245/35/18. Thoughts?
__________________
2002 Laguna Seca Blue E46 M3 6MT 2017 White C63 AMG Coupe 2002 Oxford Green E46 M3 6MT - Sold |
|
Appreciate
0
|
| 05-29-2010, 06:06 PM | #4 |
|
Major General
 
3530
Rep 6,626
Posts |
So I have a very similar setup. 18x8.5 all around ET40 with (245/40/18)
I have a 3mm spacers up front (effective ET 37) and 15mm spacers in back (effective ET25) I can confirm this setup works great with zero rub. At full lock the tire is about an 1/8 of an inch away from the inner liner. I'm also on KW V1's |
|
Appreciate
0
|
| 05-30-2010, 01:23 AM | #5 |
|
Ground Clearance?
299
Rep 1,726
Posts |
if you want to be square id try to keep the tires the same size.
try a 255/35/18 all around, shorter sidewall
__________________
E90 330i sold, E30 325i, E90 335i rip, E92 335i rip, E39 530i sold, E34 525i sold, E34 540i, F15 X5 35i |
|
Appreciate
0
|
 |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|
