|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Question about JB+
|
|
08-03-2010, 07:12 PM | #1 |
First Lieutenant
18
Rep 363
Posts |
Question about JB+
If I understand correctly, the JB+ fools the ECU into thinking it is oxygen starved and forcing more air into the plenum, correct? Does that wear on the oxygen sensors or the cats? Doesn't it run too lean, or does the car compensate by boosting the injectors or something? I feel like there's no such thing as a free lunch...
__________________
|
08-03-2010, 08:04 PM | #2 |
Joint Chiefs of Staff
5037
Rep 116,174
Posts |
No, nothing like that at all. It fools the ECU in to thinking its making 2-3psi less than it is. The ECU responds by raising boost 2-3psi. The fuel is closed loop, and the timing is closed loop, so the ECU adjusts both as needed. You get the same air/fuel ratio and 1-2 degrees less advance depending on the cars needs.
Mike |
Appreciate
0
|
08-03-2010, 10:40 PM | #3 |
Major
218
Rep 1,134
Posts
Drives: E90 335i LCI
Join Date: Apr 2007
Location: Greater Vancouver
|
ohh so if i crank it up to 100% the ECU will think the car is lacking 4.75 psi of boost and it needs more.
btw, can you crank it up all the way to 100 without solenoid bypass on a stock 335i on 93 octane? and will altitude affect it? sorry for thread jack!
__________________
I can help with Coding in Vancouver. PM me
Last edited by gaifaun; 08-03-2010 at 10:55 PM.. |
Appreciate
0
|
08-04-2010, 02:04 PM | #4 |
First Lieutenant
18
Rep 363
Posts |
No worries, this is good stuff! I would like to know as well!
__________________
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|