[**335i**]

Originally Posted by cuban335i

Hey guys. Is there a way I can know if my canclear is enabled or not? Or is it always on?

why u would like to turn it off? it can be always on

[cuban335i]

i wouldn't want to turn it off, but i want to know for sure that it's on

[gimmes name]

My car has something similar going on. Not sure if it's related. Any suggestions?

http://www.e90post.com/forums/showthread.php?t=459323

[gimmes name]

Originally Posted by shiv@vishnu

Please quote me accurately. I said "Not unsafe by any means."



Since the rev.2 Procede has been released, there have been 3 very simple DIY harness updates:

1) adding 2 CAN wires. This enabled all the CAN functionality (in-dash gauges, autotuning, launch control, canclear, adaptation resets, command center, feed forward boost control, etc.)

2) adding another wire for meth flow input. Necessary if you want to run a TRULY safe meth injection setup.

3) removing the o2 modifier wires. Which are now redundant since canclear provides a better solution to cat codes. It also frees up another pair of analog input/output to use at a future date for a new feature. And yes, we do suggest taking 10 seconds out of your day to reset all adaptions after making this change since it does have an effect on lambda learning. This is all done through the Procede's command center dashboard display. No laptop required.

NONE of this stuff is necessary in absolute terms. It's only necessary if you want to run the most up to date features and have the best possible driving/performing car. If that is not your goal, the Procede isn't for you.

Shiv

For #3, one of your previous comments indicated that we may not pass state inspection if this o2 modifier wires are removed. Is this accurate? I have a bone stock car other than the procede.

[**335i**]

Originally Posted by gimmes name

For #3, one of your previous comments indicated that we may not pass state inspection if this o2 modifier wires are removed. Is this accurate? I have a bone stock car other than the procede.

and why think like that?

[enrita]

Originally Posted by gimmes name

For #3, one of your previous comments indicated that we may not pass state inspection if this o2 modifier wires are removed. Is this accurate? I have a bone stock car other than the procede.

you really need to start reading about tunes, catless dps , 02 modifier etc...
if you have the stock dps you WILL always PASS. Tune has nothing to do with it.

[**335i**]

Originally Posted by enrita

you really need to start reading about tunes, catless dps , 02 modifier etc...
if you have the stock dps you WILL always PASS. Tune has nothing to do with it.

+1

and if u have catless dps V5 will deal with that it has -Built-in o2 modifier