"Black caps" for Charge pipe/Bov

soulja620 · 12-07-2010, 07:59 PM

Been searching from store to store for those black rubber caps that you block off (for by pass valves) when installing an aftermarket bov/chargepipe..

Any know where I can get some, or buy some off someone?

Thanks!
Ryan,

PeteW84 · 12-07-2010, 08:04 PM

Quote:

Originally Posted by soulja620

Been searching from store to store for those black rubber caps that you block off (for by pass valves) when installing an aftermarket bov/chargepipe..

Any know where I can get some, or buy some off someone?

Thanks!
Ryan,

The caps should be included in whatever bov kit you're getting.

Jeff@TopGearSolutions · 12-07-2010, 08:17 PM

I could use some of those too, mine ripped

ErvGotti · 12-07-2010, 08:31 PM

Got mine at the home depot, they were 22mm black rubber caps that you put on the bottom of chairs and tables and stuff to prevent scuffing up the floor.

They're labled as leg tips and the part # on it is 89127 they fit perfectly.

JonLerd · 12-07-2010, 08:37 PM

Quote:

Originally Posted by ErvGotti

Got mine at the home depot, they were 22mm black rubber caps that you put on the bottom of chairs and tables and stuff to prevent scuffing up the floor.

They're labled as leg tips and the part # on it is 89127 they fit perfectly.

you are awsome...been looking for these forever!!!

k726 · 12-07-2010, 09:35 PM

I have some in my garage. When I find them I'll give them to whoever pmd first. Free just pay the shipping. Priority flat rate is $4.95.

ErvGotti · 12-07-2010, 09:43 PM

Quote:

Originally Posted by JonLerd

you are awsome...been looking for these forever!!!

Yeah np I looked forever in the plumbing section and I think I found it in the hardware place, but yeah if you type the part number in the home depot site it'll pop up.

Ghines1279 · 12-07-2010, 11:28 PM

i got these plugs at advance, they tighten up with a socket and expand to fit the hole, was like 3$

M3 Eater · 12-08-2010, 10:26 AM

any hardware store.....or even walmart. Find replacement for the rubber feet for folding chairs. It works perfectly. Actually better that the thin vinyl I've seen on some kits.

M3 Eater · 12-08-2010, 10:27 AM

Quote:

Originally Posted by ErvGotti

Got mine at the home depot, they were 22mm black rubber caps that you put on the bottom of chairs and tables and stuff to prevent scuffing up the floor.

They're labled as leg tips and the part # on it is 89127 they fit perfectly.

sorry... didn't read the whole thread...

12-07-2010, 07:59 PM	#1
soulja620 Cpl D 41 Rep 563 Posts Drives: 07 335i Join Date: May 2010 Location: Phoenix, AZ iTrader: (8)	"Black caps" for Charge pipe/Bov Been searching from store to store for those black rubber caps that you block off (for by pass valves) when installing an aftermarket bov/chargepipe.. Any know where I can get some, or buy some off someone? Thanks! Ryan, __________________ 07 AW e90 335 :jb4/dci/ic/meth= 12.2 @116 :jb4/dci/ic/meth/RaceGas/Slicks/gutted = Broken ET BOARD! 88- Mitsubishi Starion Turbo- Built~My feedback~ http://www.starquestclub.com/forum/i...0&fromsearch=1
	Appreciate 0 Tweet Quote

12-07-2010, 08:17 PM	#3
Jeff@TopGearSolutions 3482 Rep 79,210 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	I could use some of those too, mine ripped
	Appreciate 0 Quote

12-07-2010, 08:31 PM	#4
ErvGotti Major 122 Rep 1,360 Posts Drives: 2008 135i 6MT Join Date: Jul 2010 Location: Aviano iTrader: (5) Garage List 2008 135i [6.00]	Got mine at the home depot, they were 22mm black rubber caps that you put on the bottom of chairs and tables and stuff to prevent scuffing up the floor. They're labled as leg tips and the part # on it is 89127 they fit perfectly.
	Appreciate 0 Quote

12-07-2010, 09:35 PM	#6
k726 Member 15 Rep 282 Posts Drives: 2011 335is Join Date: May 2010 Location: Miami, Florida iTrader: (6)	I have some in my garage. When I find them I'll give them to whoever pmd first. Free just pay the shipping. Priority flat rate is $4.95.
	Appreciate 0 Quote

12-07-2010, 11:28 PM	#8
Ghines1279 Second Lieutenant 7 Rep 238 Posts Drives: F30 335i Join Date: Mar 2009 Location: SAN DIEGO! iTrader: (5) Garage List 2007 e92 335i [0.00]	i got these plugs at advance, they tighten up with a socket and expand to fit the hole, was like 3$
	Appreciate 0 Quote

12-08-2010, 10:26 AM	#9
M3 Eater Major 37 Rep 1,054 Posts Drives: 335i Sedan Join Date: May 2010 Location: Unknown iTrader: (3) Garage List 2007 335i [0.00]	any hardware store.....or even walmart. Find replacement for the rubber feet for folding chairs. It works perfectly. Actually better that the thin vinyl I've seen on some kits. __________________ JB4 beta 15 ohms FSB,AEM inline filter/ CM 10, ETS fmic, ER custom made charge pipe,TSW Donnington 18's,Simitumo HTRZ3, Injen DCI, AR DPs, Forge DVs, AA SLD, Koni FSD, ZSP springs.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search