|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Wagner Intercooler Review
|
|
12-09-2010, 07:21 PM | #1 |
Banned
156
Rep 1,809
Posts |
Wagner Intercooler Review
Today I installed my Wagner intercooler on my 335i. A bigger intercooler is a requirement for GIAC Stage 2 flash which I had installed recently.
The Wagner intercooler is a bar-and-plate stepped core intercooler, similar to the Helix. It has louvered fins on the outside (good cooling) and straight fins on the inside (low pressure drop and good cooling because it is huge). The installation required a bit of cutting, but the guys from the tuning shop were able to make very clean cuts. The intercooler fit perfectly after that. The hoses were a pain to fit though, but in the end they fit perfectly. The Wagner install instructions were useless for my car, they assumed an e92 without the M-Sport package and I have an e90 LCI with M-Sport package. There are some differences in the intercooler surrounding plastics. As far as driving impressions, there is definitely a lot more power with the GIAC Stage 2 going from the stock intercooler (which I shouldn't use with Stage 2 but I did for a few tests) and the Wagner. The car is now BRUTAL Whereas with the stock intercooler the boost climbed to 17+ psi due to high IATs, with the Wagner the boost never climbed above 16psi. With a 10 degrees Celsius ambient temperature, the IAT's never got over 31-32 Celsius at full throttle. I noticed a bit of turbo lag compared to the stock intercooler (somewhat expected for an intercooler this big) but I don't have a definitive resolution on that. Looking from the before/after BT cable logs, the lag was identical to the stocker (under 1 second to build full requested boost on both graphs). The last graph is with the stock intercooler. First 2 graphs are with Wagner. I wasn't able to do 2-3-4 gear runs due to bad weather, but I managed to do a few 3rd gear and 4 gear separate runs. I have attached some logs. Well...that's about it. Another step in my journey to a 400whp car. Next week: Injen Intake Last edited by tscdennab; 12-09-2010 at 07:40 PM.. |
12-09-2010, 08:02 PM | #3 |
Colonel
1335
Rep 2,245
Posts |
very nice indeed! are you running downpipes?
__________________
15 F82 M4,YMB-6MT
17 G30 540i,AW-8spd ZF 24 G82 M4C x-drive, DY-Dakar Yellow ind-8spd ZF |
Appreciate
0
|
12-09-2010, 08:38 PM | #6 |
Major General
189
Rep 6,631
Posts |
+1, you went from 9 degrees to 5.5 abruptly... that can't be good.
__________________
E90 LCI N54 6AT
|
Appreciate
0
|
12-09-2010, 09:44 PM | #7 |
Major General
161
Rep 7,377
Posts |
Yeah some good gas of 93/94 instead of 91 should cure that ;-)
__________________
07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
|
Appreciate
0
|
12-10-2010, 02:59 AM | #9 |
Major
30
Rep 1,041
Posts |
Great to see some logs.
Incidentially I just had my Wagner FMIC installed wednesday, and my mechanic also said that the hose was a PITA to fit, and also that it required some heavier bolts to mount than the OEM FMIC. I had an Afe DCI intake installed at the same time, and also due to really bad weather (i.e. slippery roads), I haven't been able to test it properly just yet. It seems though, that my car has gotten more quiet. I use a Steinbauer tune, so in a few weeks I'll be adjusting the level of that according to the new FMIC. My mechanic (who has built some of Europes fastest cars) said that the Wagner FMIC was very good quality and that it would give med at least another free 20 whp. He also frowned at the OEM FMIC's plastic end pieces.... It's kinda stealth as well, as it's hardly noticeable from the outside, as you may be able to see from my crappe phone pics.... |
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|