Engine light issues (not the engine malfunction error)

clairvoyant · 12-31-2010, 10:17 AM

I have UR high flow cats downpipes installed about 2 years ago and no problem since.
I was driving to Syracuse last weekend and the engine light [not the engine malfunction error] was on (a 3 hour drive).
The engine was on for the longest time (driving back to Ottawa as well).

I parked my car for two days and then I drove around town, that engine light disappeared.

It seems that engine light appears on "long distance drives".

I scanned using the Procede DME error, no error codes.
What could be the problem?
Could there be my O2 sensors defected or could the catalytic converters on those downpipes giving up?
I worry since I will have to do an emission test sometime in Fall 2011.

Thank you for your help, folks.

Forcefed3 · 12-31-2010, 10:24 AM

O2 sensors could be going bad. You need to go to autozone to get them to check codes or buy a BT cable.

clairvoyant · 12-31-2010, 10:39 AM

Can the Procede also detect OBDII codes from the engine light warning as well?

Quote:

Originally Posted by gbreeE90

O2 sensors could be going bad. You need to go to autozone to get them to check codes or buy a BT cable.

Forcefed3 · 12-31-2010, 10:44 AM

Quote:

Originally Posted by clairvoyant

Can the Procede also detect OBDII codes from the engine light warning as well?

I dont know about detecting them, but it can clear them. Maybe PM shiv.

enrita · 12-31-2010, 10:55 AM

you need to log the DME codes and see which ones comes out. Also are you using the Procede 02 sim? Do you have CAN Clear ON? Maybe your cats are starting to go bad and not cleaning gases as good as they did before.

clairvoyant · 12-31-2010, 05:03 PM

Strangely, no DME codes were recorded. 0 error code.
I leave the Procede O2 sim at 100%, no change at all.
I have the CAN Clear ON.
================================================== ===============
Can someone perhaps enlighten me as what are the typical 2 sensor damage codes and what are the typical cat malfunction codes?
That way I will r3ecognize them next time I get any error. Thank You

Quote:

Originally Posted by enrita

you need to log the DME codes and see which ones comes out. Also are you using the Procede 02 sim? Do you have CAN Clear ON? Maybe your cats are starting to go bad and not cleaning gases as good as they did before.

OpenFlash · 12-31-2010, 05:13 PM

Probably best to just turn CANclear off and see what code pops up during a long drive. My guess is that it is a cat inefficiency code but you wont know until you try it and see what it reads. The SES light is triggered when an emissions related code is tripped. Given the aftermarket cats, that makes sense.

Shiv

clairvoyant · 12-31-2010, 05:24 PM

Shiv, do you think it's the cat issues?
I kind of think that way upon visual inspections of the O2 sensor wires and connections.

Quote:

Originally Posted by shiv@vishnu

Probably best to just turn CANclear off and see what code pops up during a long drive. My guess is that it is a cat inefficiency code but you wont know until you try it and see what it reads. The SES light is triggered when an emissions related code is tripped. Given the aftermarket cats, that makes sense.

Shiv

12-31-2010, 10:17 AM	#1
clairvoyant Major 84 Rep 1,032 Posts Drives: Bavarian Manure Wagon (BMW) Join Date: Oct 2007 Location: 45°19′20″N, 75°50′0″W iTrader: (5) Garage List 2007 335i [5.24]	Engine light issues (not the engine malfunction error) I have UR high flow cats downpipes installed about 2 years ago and no problem since. I was driving to Syracuse last weekend and the engine light [not the engine malfunction error] was on (a 3 hour drive). The engine was on for the longest time (driving back to Ottawa as well). I parked my car for two days and then I drove around town, that engine light disappeared. It seems that engine light appears on "long distance drives". I scanned using the Procede DME error, no error codes. What could be the problem? Could there be my O2 sensors defected or could the catalytic converters on those downpipes giving up? I worry since I will have to do an emission test sometime in Fall 2011. Thank you for your help, folks.
	Appreciate 0 Tweet Quote

12-31-2010, 10:24 AM	#2
Forcefed3 Banned 131 Rep 4,732 Posts Drives: 2008 335i Join Date: May 2010 Location: South iTrader: (2) Garage List 2008 335i [1.00]	O2 sensors could be going bad. You need to go to autozone to get them to check codes or buy a BT cable.
	Appreciate 0 Quote

12-31-2010, 10:55 AM	#5
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	you need to log the DME codes and see which ones comes out. Also are you using the Procede 02 sim? Do you have CAN Clear ON? Maybe your cats are starting to go bad and not cleaning gases as good as they did before. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

12-31-2010, 05:13 PM	#7
OpenFlash 1809 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Probably best to just turn CANclear off and see what code pops up during a long drive. My guess is that it is a cat inefficiency code but you wont know until you try it and see what it reads. The SES light is triggered when an emissions related code is tripped. Given the aftermarket cats, that makes sense. Shiv
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search