Procede Clutch slipping Torque 93 pump

Overboost · 01-28-2011, 07:59 PM

Very first run the clutch slipped as the car spike almost 450ftlbs of torque with the procede set to 15psi on the 1/21 maps. The first run was aborted before redline and therefore was not shown on the graph. Below is a dyno graph of the 3 runs without the clutch slipping. Although u cant see it properly, torque peaked at 424ftlbs. This is on 93 pump gas 15psi 50IC and no meth.

This will also be my baseline dyno for my AWD turbo upgrade which I will probably start to tomorrow.

Alan l. · 01-28-2011, 08:24 PM

How many miles on the clutch? That is CRAZY torque for only 15 psi on 93 octane.

Seems like a few people started having clutch issues all at the same time lately.

Alan

335iLI · 01-28-2011, 08:30 PM

Quote:

Originally Posted by Overboost

Very first run the clutch slipped as the car spike almost 450ftlbs of torque with the procede set to 15psi on the 1/21 maps. The first run was aborted before redline and therefore was not shown on the graph. Below is a dyno graph of the 3 runs without the clutch slipping. Although u cant see it properly, torque peaked at 424ftlbs. This is on 93 pump gas 15psi 50IC and no meth.

This will also be my baseline dyno for my AWD turbo upgrade which I will probably start to tomorrow.

baseline run..

Overboost · 01-28-2011, 08:48 PM

Quote:

Originally Posted by Alan l.

How miles on the clutch? That is CRAZY torque for only 15 psi on 93 octane.

Seems like a few people started having clutch issues all at the same time lately.

Alan

Car it at 50k miles now. Clutch doesnt slip at 420ftlb but on the one dyno run where it spiked higher it slipped pretty bad for about 1000 rpm but never slipped after that. I think the procede was still adjusting because i had just done the harness update and reset the procede learned values.

Overboost · 01-28-2011, 08:49 PM

Hey Shiv maybe this explains why i was spinning the tires in 4th gear

cn555ic · 01-28-2011, 09:01 PM

Quote:

Originally Posted by Overboost

Very first run the clutch slipped as the car spike almost 450ftlbs of torque with the procede set to 15psi on the 1/21 maps. The first run was aborted before redline and therefore was not shown on the graph. Below is a dyno graph of the 3 runs without the clutch slipping. Although u cant see it properly, torque peaked at 424ftlbs. This is on 93 pump gas 15psi 50IC and no meth.

This will also be my baseline dyno for my AWD turbo upgrade which I will probably start to tomorrow.

Damn 93 and 15 psi and get those numbers! Wow with meth its going to be crazy!

OpenFlash · 01-28-2011, 09:50 PM

355whp on a dyno dynamics dyno? That's solid... Congrats! Well, minus the part about the clutch

Overboost · 01-28-2011, 10:02 PM

Quote:

Originally Posted by shiv@vishnu

355whp on a dyno dynamics dyno? That's solid... Congrats! Well, minus the part about the clutch

Thanks... and the tuner was alot more pleased with the afr curve after the harness update eventhough he still thought they were lean down low lol. But as I said to him, you have been tuning them for about 4 years now so i think you know what you are talking about.

Former_Boosted_IS · 01-31-2011, 06:25 AM

Quote:

Originally Posted by cn555ic

Damn 93 and 15 psi and get those numbers! Wow with meth its going to be crazy!

The torque is artificial because of the clutch slip. I hit 560 rwtq when my clutch went to sleep.

Overboost · 01-31-2011, 10:50 AM

Quote:

Originally Posted by Former_Boosted_IS

The torque is artificial because of the clutch slip. I hit 560 rwtq when my clutch went to sleep.

Didnt slip on the runs shown... we checked road speed vs rpm and there was no dip in the curve. Only the very first run slipped when the torque hit about 450ftlbs (not shown on the graph because the run was aborted early)

stressdoc · 01-31-2011, 11:15 AM

Wicked performance mods. No LSD yet?

Former_Boosted_IS · 01-31-2011, 11:35 AM

Quote:

Originally Posted by Overboost

Didnt slip on the runs shown... we checked road speed vs rpm and there was no dip in the curve. Only the very first run slipped when the torque hit about 450ftlbs (not shown on the graph because the run was aborted early)

If hope that is not intentional to pop 450 rwtq then down to 400 rwtq in 500 rpms. That cannot be smooth at all.

Overboost · 01-31-2011, 12:03 PM

Quote:

Originally Posted by Former_Boosted_IS

If hope that is not intentional to pop 450 rwtq then down to 400 rwtq in 500 rpms. That cannot be smooth at all.

Well when we put the the torque graph for that run against road speed, it did not slip until torque peak was reached so it was smooth up until then. I correct myself for using the word spike. Looking at that graph it slipped for about 1000rpm until at which point the torque started dropping off which leaves me to believe that the max torque capacity of the stock clutch is somewhere around 440ftlbs. It was the very first run after i had reset all adaptations after doing the harness update.

Overboost · 01-31-2011, 12:04 PM

Not sure how we could intentionally slip the clutch??

dzenno · 01-31-2011, 12:18 PM

That's a torque monster you got there

watch your halfshafts

Overboost · 01-31-2011, 05:11 PM

Quote:

Originally Posted by dzenno

That's a torque monster you got there

watch your halfshafts

I'm guessing from your signature that you have some experience with halfshafts

themyst · 01-31-2011, 05:17 PM

I'm curious as to why the power curve up top does not look anything like the one Shiv posted with his 411whp...

Overboost · 01-31-2011, 05:30 PM

Quote:

Originally Posted by themyst

I'm curious as to why the power curve up top does not look anything like the one Shiv posted with his 411whp...

Not enought adaptation time, different mods, different dyno or a combination of different variables... Your guess is as good as mine.

Overboost · 01-31-2011, 05:34 PM

I'm still also using the stock airbox with stock drop in filter.

01-28-2011, 07:59 PM	#1
Overboost Second Lieutenant 15 Rep 284 Posts Drives: Monaco Blue 335i Join Date: Mar 2010 Location: Kentucky iTrader: (0)	Procede Clutch slipping Torque 93 pump Very first run the clutch slipped as the car spike almost 450ftlbs of torque with the procede set to 15psi on the 1/21 maps. The first run was aborted before redline and therefore was not shown on the graph. Below is a dyno graph of the 3 runs without the clutch slipping. Although u cant see it properly, torque peaked at 424ftlbs. This is on 93 pump gas 15psi 50IC and no meth. This will also be my baseline dyno for my AWD turbo upgrade which I will probably start to tomorrow. __________________ PROCEDE V5, AR CATLESS DP's, HELIX FMIC, ER CHARGE PIPE AND TIAL BOV, OHLINS ROAD AND TRACK COILOVERS, INJEN INTAKE, AWD TURBO UPGRADE, VISHNU PWM METHANOL INJECTION, AMS CATBACK EXHAUST, M3 FRONT SUSPENSION COMPONENTS,VOLK RE30 19X9F 19X10R W/ YOKOHAMA ADVAN AD08 265/275
	Appreciate 0 Tweet Quote

01-28-2011, 08:24 PM	#2
Alan l. Major General 5991 Rep 9,140 Posts Drives: 2020 F95 X5M Competition Join Date: Jun 2009 Location: United States iTrader: (9)	How many miles on the clutch? That is CRAZY torque for only 15 psi on 93 octane. Seems like a few people started having clutch issues all at the same time lately. Alan __________________ Last edited by Alan l.; 01-28-2011 at 09:54 PM..
	Appreciate 0 Quote

01-28-2011, 08:49 PM	#5
Overboost Second Lieutenant 15 Rep 284 Posts Drives: Monaco Blue 335i Join Date: Mar 2010 Location: Kentucky iTrader: (0)	Hey Shiv maybe this explains why i was spinning the tires in 4th gear __________________ PROCEDE V5, AR CATLESS DP's, HELIX FMIC, ER CHARGE PIPE AND TIAL BOV, OHLINS ROAD AND TRACK COILOVERS, INJEN INTAKE, AWD TURBO UPGRADE, VISHNU PWM METHANOL INJECTION, AMS CATBACK EXHAUST, M3 FRONT SUSPENSION COMPONENTS,VOLK RE30 19X9F 19X10R W/ YOKOHAMA ADVAN AD08 265/275
	Appreciate 0 Quote

01-28-2011, 09:50 PM	#7
OpenFlash 1849 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	355whp on a dyno dynamics dyno? That's solid... Congrats! Well, minus the part about the clutch
	Appreciate 0 Quote

01-31-2011, 11:15 AM	#11
stressdoc Moderator 670 Rep 10,866 Posts Drives: BMW i8; Toy 4runner TRD pro Join Date: Jun 2005 Location: Waco TX iTrader: (0)	Wicked performance mods. No LSD yet? __________________ My recent ED photos: http://f80.bimmerpost.com/forums/sho....php?t=1026808 my not-so-recent ED: http://www.e90post.com/forums/showthread.php?t=31829 Please join BMWCCA http://bmwcca.org/index.php?pageid=c...&ref_by=300279
	Appreciate 0 Quote

01-31-2011, 12:04 PM	#14
Overboost Second Lieutenant 15 Rep 284 Posts Drives: Monaco Blue 335i Join Date: Mar 2010 Location: Kentucky iTrader: (0)	Not sure how we could intentionally slip the clutch?? __________________ PROCEDE V5, AR CATLESS DP's, HELIX FMIC, ER CHARGE PIPE AND TIAL BOV, OHLINS ROAD AND TRACK COILOVERS, INJEN INTAKE, AWD TURBO UPGRADE, VISHNU PWM METHANOL INJECTION, AMS CATBACK EXHAUST, M3 FRONT SUSPENSION COMPONENTS,VOLK RE30 19X9F 19X10R W/ YOKOHAMA ADVAN AD08 265/275
	Appreciate 0 Quote

01-31-2011, 12:18 PM	#15
dzenno Banned 298 Rep 5,876 Posts Drives: Join Date: Feb 2006 iTrader: (1)	That's a torque monster you got there watch your halfshafts
	Appreciate 0 Quote

01-31-2011, 05:17 PM	#17
themyst Major General 192 Rep 6,631 Posts Drives: '16 MK7 GTI Join Date: Feb 2009 Location: NYC iTrader: (8)	I'm curious as to why the power curve up top does not look anything like the one Shiv posted with his 411whp... __________________ E90 LCI N54 6AT
	Appreciate 0 Quote

01-31-2011, 05:34 PM	#19
Overboost Second Lieutenant 15 Rep 284 Posts Drives: Monaco Blue 335i Join Date: Mar 2010 Location: Kentucky iTrader: (0)	I'm still also using the stock airbox with stock drop in filter. __________________ PROCEDE V5, AR CATLESS DP's, HELIX FMIC, ER CHARGE PIPE AND TIAL BOV, OHLINS ROAD AND TRACK COILOVERS, INJEN INTAKE, AWD TURBO UPGRADE, VISHNU PWM METHANOL INJECTION, AMS CATBACK EXHAUST, M3 FRONT SUSPENSION COMPONENTS,VOLK RE30 19X9F 19X10R W/ YOKOHAMA ADVAN AD08 265/275
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search