[grafer4]

Somebody can help me to know how to read the code with the JB4 ???

This is my code »:

[e92bmw]

Wrong forum buddy...N54tech is where all the jb guys are, here there are only a few of them.

[e92bmw]

Are you trying to read the codes or clwar them? Im pretty sure you need to use a usb cable hooked up to a laptop to read the codes and see what they mean. But I cant talk from experience, since Ive never used one.

[chili36]

1) The blinkers will flash twice and the speedo will move to indicate how many codes are stored.

2) The speedo will return to zero and begin reading out the codes. Each is a 4 digit number. Note the position of the speedo and reference the photo below to convert them to 0-9 and A-F code numbers. Those numbers can then be searched on this forum.

3) Each code will be followed by two flashes of the blinkers.

4) At the conclusion of the reading the blinkers will flash four times.

5) If the blinkers flash twice, then four times, with nothing in between, you have no stored codes.

[grafer4]

is it the same thing with a km/h cluster???

[chili36]

Originally Posted by beemw

Are you trying to read the codes or clwar them? Im pretty sure you need to use a usb cable hooked up to a laptop to read the codes and see what they mean. But I cant talk from experience, since Ive never used one.

You can read codes with or without a laptop! Stick to thread subjects you are more experienced with. Lets NOT spread misinformation.

[chili36]

Originally Posted by grafer4

is it the same thing with a km/h cluster???

See here..http://www.n54tech.com/forums/showthread.php?t=11495

[Dr. G]

Originally Posted by beemw

Wrong forum buddy...N54tech is where all the jb guys are, here there are only a few of them.

Tons of JB guys here what are you talkking about haha?

[Mike@N54Tuning.com]

I really would recommend getting the USB cable. The new JB4 firmware has a full code management menu where you can scan the car, and it displays the codes with descriptions.

Well worth the 30-35.00 bux!

Mike

[e92bmw]

Originally Posted by chili36

You can read codes with or without a laptop! Stick to thread subjects you are more experienced with. Lets NOT spread misinformation.

Lol ok have fun reading your codes by seeing your speed... Just use a kaptop its soo much easier.

[e92bmw]

Originally Posted by Mike@N54Tuning.com

I really would recommend getting the USB cable. The new JB4 firmware has a full code management menu where you can scan the car, and it displays the codes with descriptions.

Well worth the 30-35.00 bux!

Mike

+1 usb cable is a must have

[Forcefed3]

Originally Posted by beemw

Are you trying to read the codes or clwar them? Im pretty sure you need to use a usb cable hooked up to a laptop to read the codes and see what they mean. But I cant talk from experience, since Ive never used one.

Make sure you know what you're talking about before you tell someone something.

[chili36]

Originally Posted by beemw

Lol ok have fun reading your codes by seeing your speed... Just use a kaptop its soo much easier.

There you go going off assumptions again. FYI, I use my Laptop. I was just Informing OP that codes are readable without a laptop. Factual Info.

[e92bmw]

Originally Posted by gbreeE90

Make sure you know what you're talking about before you tell someone something.

You see instead of posting useless comments like this why not help out the op since you used to have a jb3...

[migue90]

Originally Posted by beemw

You see instead of posting useless comments like this why not help out the op since you used to have a jb3...

Practice what you preach