235 fronts on kw v2? Please help

domrep · 04-25-2011, 09:19 AM

Hey guys, does anyone know if front 235/35/19's on 8.5" rims will fit without rubbing fender or struts if I'm lowered on KW V2's? Anybody have a similar set up? Any help would be appreciated!

remmib · 04-25-2011, 09:24 AM

I've got KW v2, and has used both 19x8.5 and 20x8.5 with 235 tires, as long as the offset is lower than approx. ET42-43, you'll be fine on the strut side.

domrep · 04-25-2011, 11:04 AM

I see, so no fender rubbing on the front when turning? Mine are ET35ish I think so I should be way in the clear then?

MassBimmer · 04-25-2011, 11:19 AM

That's an extremely common set-up on all E9x's...you'll be fine

kamek · 04-25-2011, 11:23 AM

Quote:

Originally Posted by MassBimmer

That's an extremely common set-up on all E9x's...you'll be fine

Exactly... It's conservative.

ModBargains.com · 04-25-2011, 11:25 AM

You'll be fine with the 19x8.5 ET30-35 with a 235/35/19 lowered on the KW V2 without any issues!

domrep · 04-25-2011, 11:43 AM

Thanks Alan

. I'm only scared because currently my 245's don't fit at all...surprised that 10mm will make that much of a difference.

remmib · 04-25-2011, 06:04 PM

Quote:

Originally Posted by domrep

Thanks Alan

. I'm only scared because currently my 245's don't fit at all...surprised that 10mm will make that much of a difference.

What you you mean by 'don't fit at all'?
If it's close to ET35, that's sounds weird.

domrep · 04-25-2011, 09:59 PM

I know, I was in shock. I can't make a full turn at all without hit hitting the strut hard and the front fender.

Daya · 04-26-2011, 10:24 AM

I am running on 235/35-19 on 19x8.5 ET32 with zero rubbing lowered on KW v1

VMRWheels · 04-26-2011, 01:16 PM

Quote:

Originally Posted by domrep

I see, so no fender rubbing on the front when turning? Mine are ET35ish I think so I should be way in the clear then?

You should clear the inside and outside without a problem with a 8.5 +35 and a 235 tire. With a 245 you may have a very slight rubbing issue during cornering.

-Charles@VMRWheels

04-25-2011, 09:19 AM	#1
domrep Captain 43 Rep 993 Posts Drives: AW E93 335i Join Date: Mar 2009 Location: Toronto iTrader: (3)	235 fronts on kw v2? Please help Hey guys, does anyone know if front 235/35/19's on 8.5" rims will fit without rubbing fender or struts if I'm lowered on KW V2's? Anybody have a similar set up? Any help would be appreciated! Last edited by domrep; 04-25-2011 at 11:19 AM..
	Appreciate 0 Tweet Quote

04-25-2011, 09:24 AM	#2
remmib General 1584 Rep 29,215 Posts Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway iTrader: (0)	I've got KW v2, and has used both 19x8.5 and 20x8.5 with 235 tires, as long as the offset is lower than approx. ET42-43, you'll be fine on the strut side. __________________ F10 520d M-Sport Alpine White \| HRE P43SC 20x9+20x11 \| Michelin PSS 255/35+295/30 \| KW V3 Coilover \| M5 Front Sway Bar + M550d Rear Sway Bar \| 3DDesign Front Lip \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser \| BMW M Performance Black Grills \| BMW M Performance Pedals \|
	Appreciate 0 Quote

04-25-2011, 11:04 AM	#3
domrep Captain 43 Rep 993 Posts Drives: AW E93 335i Join Date: Mar 2009 Location: Toronto iTrader: (3)	I see, so no fender rubbing on the front when turning? Mine are ET35ish I think so I should be way in the clear then?
	Appreciate 0 Quote

04-25-2011, 11:19 AM	#4
MassBimmer Major General 313 Rep 7,437 Posts Drives: 2023 i4 M50 Join Date: May 2009 Location: MA iTrader: (6) Garage List 2009 BMW [9.24]	That's an extremely common set-up on all E9x's...you'll be fine
	Appreciate 0 Quote

04-25-2011, 11:25 AM	#6
ModBargains.com Banned 485 Rep 13,582 Posts Drives: JB E92 335i Join Date: Feb 2008 Location: 1721 E. Lambert Rd #C, La Habra, CA 90631 iTrader: (51)	You'll be fine with the 19x8.5 ET30-35 with a 235/35/19 lowered on the KW V2 without any issues!
	Appreciate 0 Quote

04-25-2011, 11:43 AM	#7
domrep Captain 43 Rep 993 Posts Drives: AW E93 335i Join Date: Mar 2009 Location: Toronto iTrader: (3)	Thanks Alan . I'm only scared because currently my 245's don't fit at all...surprised that 10mm will make that much of a difference.
	Appreciate 0 Quote

04-25-2011, 09:59 PM	#9
domrep Captain 43 Rep 993 Posts Drives: AW E93 335i Join Date: Mar 2009 Location: Toronto iTrader: (3)	I know, I was in shock. I can't make a full turn at all without hit hitting the strut hard and the front fender.
	Appreciate 0 Quote

04-26-2011, 10:24 AM	#10
Daya Lieutenant Colonel 203 Rep 1,741 Posts Drives: e92 335 space gray/coral red Join Date: Sep 2006 Location: Chicago iTrader: (1) Garage List 2007 E92 335 [9.66]	I am running on 235/35-19 on 19x8.5 ET32 with zero rubbing lowered on KW v1 __________________ GIAC S2 \| Brembo GT BBK 355/345 \| BBS CH-R \| Michelin Pilot Super Sports \| AR Design: DP, S1 Oil Cooler, OCC \| AMS FMIC \| Bastuck Quad Exhaust \| Borla MP \| KW V1 \| Stett: CAI, CP \| Forge DV \| P3 Boost Gauge \| Arkym: Front Lip, Rear Quad Diffuser \| Vorsteiner CSL Trunk \| LUX H8 \| ModMyNav \| MFD M3 Sideskirts \| BMW M-Tech Front/Rear Bumpers, Edition Grills
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search