[RaihaX]

Originally Posted by c4s335i

Change your boost control gain to 50.

Cool I'll try that

[DLuce76]

Originally Posted by shiv@vishnu

As for the boost response loss before 3500rpm, that's simply from revised boost dc mapping. I'll put it back to what it was in the earlier map with the next release

Great to see someone responding to unsolicited customer feedback on a product.

This is why I chose the Procede over anything else. I'm used to reading about the Vishnu experience from my days with a WRX, and wanted that same experience with my current car.

Thanks Shiv!

[Jeff@TopGearSolutions]

Boost gain of 50 FTW.

In fact, its a little too much club now. Cant keep the car straight again! lol

[Small Block LSX]

I just had my V5 installed last weekend. I have the long crank (sometimes), the disabled cruise control (sometimes), and my PROcede is locked on map 2 and won't let me change. When I try and activate my cruise control I get the logo on the dash, however, it stead of showing me vehicles set speed it just has a few dashes through it. Pretty annoying not having cruise control... but the car sure runs like a raped ape on map 2!

Going back to the shop this Saturday and having it reset and dumed and hopefully it fixes the problems... otherwise I'll be very disappointed. I also left a message 3 days ago regarding this problem and have yet to receive a call back.

John

[wren57]

LSX, just upgrade to the 5-10 maps and the issues will be gone.

[Small Block LSX]

Originally Posted by wren57

LSX, just upgrade to the 5-10 maps and the issues will be gone.

I think thats what the shop is doing on Saturday. I wasn't there when it was done. I came to the shop and my car was all detailed and much faster with the PROcede.

I just hope the car responds like it does right now and gets rid of the bugs. I don't feel like losing any power that I got used to.

[JacksonHandy]

Originally Posted by wren57

LSX, just upgrade to the 5-10 maps and the issues will be gone.

I'm still having cruise control problems on the 5-10 maps, don't know why.

[pits200]

You guys with cc problems know that if u have dtc and dsc disabled that u can't activate cruise control. It's a BMW safety feature

[jdbretz]

Originally Posted by pits200

You guys with cc problems know that if u have dtc and dsc disabled that u can't activate cruise control. It's a BMW safety feature

Yes, everyone who is experiencing the problem is aware of that. The problem we have is in no way related to DTC/DSC. That along with all the other things that cause the CC to be shut off have all been covered, and are not the root of the problem.

[RR80]

Originally Posted by Small Block LSX

I just had my V5 installed last weekend. I have the long crank (sometimes), the disabled cruise control (sometimes), and my PROcede is locked on map 2 and won't let me change. When I try and activate my cruise control I get the logo on the dash, however, it stead of showing me vehicles set speed it just has a few dashes through it. Pretty annoying not having cruise control... but the car sure runs like a raped ape on map 2!

Going back to the shop this Saturday and having it reset and dumed and hopefully it fixes the problems... otherwise I'll be very disappointed. I also left a message 3 days ago regarding this problem and have yet to receive a call back.

John

Try upload the firmware and map again yourself after read the read me file that come with the map, I found the problem always cause by the incomplete map or firmware. I only trust myself when it come to updating map~!

[wren57]

I have a feeling that 5-25 will never go public. Instead it will be 6-**.

[Transport3r]

Originally Posted by wren57

I have a feeling that 5-25 will never go public. Instead it will be 6-**.

+1

We demand instant satisfaction!

[cn555ic]

Originally Posted by wren57

I have a feeling that 5-25 will never go public. Instead it will be 6-**.

Hey all that ass kissing got you new maps before anyone else did! Good for you!

[DaFish]

Originally Posted by shiv@vishnu

As for the boost response loss before 3500rpm, that's simply from revised boost dc mapping. I'll put it back to what it was in the earlier map with the next release

Awesome thanks Shiv I appreciate all you do !

[s2k_335i]

I hope to get the new map soon!

[Brian135i]

^^^^for new maps soon!

[MF80]

Shiv, add N/A map back too please!
Love being slow while adding MPG during long range cruise ...

[Papajim]

Originally Posted by JsTech

Shiv, add N/A map back too please!
Love being slow while adding MPG during long range cruise ...

Go buy yourself a prius man or a Polo 1.2 diesel...

[enrita]

Originally Posted by Papajim

Go buy yourself a prius man or a Polo 1.2 diesel...

Haha was thinking exactly the same! Who cares about mpg, power requires fuel. Our cars have great mpg , try an m3 or c63amg and after tanking everyday you will think your 335 does not use any gas at all.

[MF80]

haha... Please calm the fuck down guys.
We have options on what map to use...it's the end user's choices. If there is an N/A map then I would love to use it too. No need to talk shit here please.

[Renus]

Originally Posted by JsTech

haha... Please calm the fuck down guys.
We have options on what map to use...it's the end user's choices. If there is an N/A map then I would love to use it too. No need to talk shit here please.

No, I don't think I want this NA map to be on during the selection of map, it's quite annoying and delaying my map selection time. Rather, I prefer to amend the Procede as Map 0, 1, 2, 3, 4 or 5 (if any) by tick or untick which to be showed on dash for selection, for ex. if you have ticked Map 0, 1, 3, 5 from Procede, then you can only select Map among 0, 1, 3 and 5 from DTC button, this is my idea.

[MF80]

Originally Posted by Renus

No, I don't think I want this NA map to be on during the selection of map, it's quite annoying and delaying my map selection time. Rather, I prefer to amend the Procede as Map 0, 1, 2, 3, 4 or 5 (if any) by tick or untick which to be showed on dash for selection, for ex. if you have ticked Map 0, 1, 3, 5 from Procede, then you can only select Map among 0, 1, 3 and 5 from DTC button, this is my idea.

That's a great idea too. Not sure if this is going to happen since Shiv's time is so tight up with final release maps along with other things. If we have one that's good if not that's ok. Not a big of the deal.