[AzRiz]

Originally Posted by Josh1a1h

AHHHHHHH Thanks for the explanation bro! I am quite happy with that tbh! Does help with rubbing etc...But i still rub in the rear a little, but that it off the plastic arch trim.

I'll show you my solution to this issue on Sunday hopefully

[Josh1a1h]

So it has been a busy bank holiday weekend.

BIMMERBOYZ MEET @ MSTYLE

ACE CAFE GERMAN NIGHT

Met some old faces and new faces. Was a good weekend!

My car is still a little all over the place. Still waiting for the coilovers to completely settle before i go about setting the 'stance' as i want... But i have decided i will not making the ride as flush as it once was due to me absolutely HATING ANY RUBBING

I have a 335i and with the new m3 arms, it handles better that ever. So i am not going to ruin my experience with the sound of rubbing every 2 mins on dips, bumps and potholes.


A few pics from the weekend

[kev335i]

One word....

stunning

[Josh1a1h]

Been a busy weekend working on a beauty of an M3

Managed to snap a few quick pics between the downpours

[old grey steve]

Very nice Josh looking at the car looks like the suspensions nicely sorted

[Sparky68]

Dont remember anyone ever asking, is there a story behind the plate Josh?

[GingerBeard Man]

This car is full of win!

[mistikempire]

Car is looking Stunning! Well done bro

[Josh1a1h]

Originally Posted by old grey steve

Very nice Josh looking at the car looks like the suspensions nicely sorted

It has settled matey but not low enough yet. Will be going lower to make use of the Static+

Originally Posted by Sparky68

Dont remember anyone ever asking, is there a story behind the plate Josh?

No mate, came with the car so left it on

Originally Posted by GingerBeard Man

This car is full of win!

Originally Posted by mistikempire

Car is looking Stunning! Well done bro

[Maaarkk]

Looking really well man, very interesting read on the last couple of pages, haven't been very active on here lately so I'm not up to date on what everyone's at!
I had been reading about static+ a while ago and never did anymore research on it. Had seen another e92 that looked amazing and was told earlier it's on static+ too so I've been reading up about it again this morning and I'm really tempted to do it too!! I'm about to put a new set of bc's in and will have them maxed out as low as they go.
Really liking the idea of the static+ though as there's huge speed bumps at my work that make me cringe everyday lol.
Is the design on the meister coilovers you got the exact same as bc's then? Would the static+ system fit over them fine?

[AWBimmer]

Originally Posted by Maaarkk

Looking really well man, very interesting read on the last couple of pages, haven't been very active on here lately so I'm not up to date on what everyone's at!
I had been reading about static+ a while ago and never did anymore research on it. Had seen another e92 that looked amazing and was told earlier it's on static+ too so I've been reading up about it again this morning and I'm really tempted to do it too!! I'm about to put a new set of bc's in and will have them maxed out as low as they go.
Really liking the idea of the static+ though as there's huge speed bumps at my work that make me cringe everyday lol.
Is the design on the meister coilovers you got the exact same as bc's then? Would the static+ system fit over them fine?

In short Mark, static+ won't fit in the BC's - Josh can elaborate but we were talking about this and that's the reason Josh opted for his set of Coils instead of BCs.

Josh, car looks bang on son.

[Maaarkk]

Originally Posted by AWBimmer

In short Mark, static+ won't fit in the BC's - Josh can elaborate but we were talking about this and that's the reason Josh opted for his set of Coils instead of BCs.

Josh, car looks bang on son.

Ahh, that sucks. Haven't actually ordered the bc's yet but was going to be doing so in the next couple of days.
I am very interested in the static+ setup though so hopefully josh can give me a bit of info and I can decide what I'm gonna do. Cheers 👍

[achu]

just caught up on this... very impressive josh and yeah as AzRiz explained the sheet shows degrees and arcminutes lol, 60 arcminutes in a degree cant believe you got almost -2 on the front :| i just got mine to -1 on the front and -2.5 on the rear and fit my wheels nicely...

can't wait to see how the final stance looks

also cheeky question, where did you get your wheel bolts from? i wanna get new ones

[Edinnit]

Mint!!!!
Is that 1m front bumper? looks sick wit the carbon splitter.

And what bootlid is that?

[GOWRIN]

Wow mate the car is looking amazing and just keeps getting better!!! If only BMW rolled them out like this.

[Mikey B]

Still my favourite 92 on the site! Love it.

[Josh1a1h]

Originally Posted by Maaarkk

Looking really well man, very interesting read on the last couple of pages, haven't been very active on here lately so I'm not up to date on what everyone's at!
I had been reading about static+ a while ago and never did anymore research on it. Had seen another e92 that looked amazing and was told earlier it's on static+ too so I've been reading up about it again this morning and I'm really tempted to do it too!! I'm about to put a new set of bc's in and will have them maxed out as low as they go.
Really liking the idea of the static+ though as there's huge speed bumps at my work that make me cringe everyday lol.
Is the design on the meister coilovers you got the exact same as bc's then? Would the static+ system fit over them fine?

Give me a call matey...left you a pm

Originally Posted by AWBimmer

In short Mark, static+ won't fit in the BC's - Josh can elaborate but we were talking about this and that's the reason Josh opted for his set of Coils instead of BCs.

Josh, car looks bang on son.

Yep.. on the button

Originally Posted by Maaarkk

Ahh, that sucks. Haven't actually ordered the bc's yet but was going to be doing so in the next couple of days.
I am very interested in the static+ setup though so hopefully josh can give me a bit of info and I can decide what I'm gonna do. Cheers 👍

Wheres your call ???? haha

Originally Posted by achu

just caught up on this... very impressive josh and yeah as AzRiz explained the sheet shows degrees and arcminutes lol, 60 arcminutes in a degree cant believe you got almost -2 on the front :| i just got mine to -1 on the front and -2.5 on the rear and fit my wheels nicely...

can't wait to see how the final stance looks

also cheeky question, where did you get your wheel bolts from? i wanna get new ones

I got them from James at mstyle... but you can get them anywhere...

They are Muteki wheel bolts bro

Originally Posted by Edinnit

Mint!!!!
Is that 1m front bumper? looks sick wit the carbon splitter.

And what bootlid is that?

Yes it is. Thanks for the nice words!!!

Originally Posted by GOWRIN

Wow mate the car is looking amazing and just keeps getting better!!! If only BMW rolled them out like this.

Love these comments! Thank youuuuu.

Originally Posted by Mikey B

Still my favourite 92 on the site! Love it.

Cheers matey!!!!

Keep posted. MOARRRR to come!

[Josh1a1h]

[ollieebmw]

Yes Josh ,,,,your car is badd ass. Saw you up at M stlyle and loved the double rings on angels......Going to pm you about lights......its that time....

[rufnekfatboy]

Happy days....
Sunshine....
Couple of beers....
Big bag of Sensations...

Just read this from start to finish chilling in the garden....

josh - Good work Fella

[Josh1a1h]

SO HERE IS AN UPDATE

JUNE 30th 2014

Manage to get the Static+ Plumbed in!

Check out the vid in the link below

Here are some recent pictures too

[makkan00]

Originally Posted by Rudz

How are you finding the M3 arms, I am still on the fence about that...

+1

I guess it will be difficult for Josh to isolate the difference as if coilovers and M3 arms have gone in the same time, how can he tell if the cornering is better due to additional -ve camber or M3 arms?