[KeepitClassy]

Will this work on a Halogen setup for a LCi 328i sedan?

[sohcpunk]

Just following up with the thread. I've had these on my 335d for over 4 months and they are still running strong. No problems, no heating issues, no yellowing issues, and they are bright as hell!

[nomis_nehc]

Originally Posted by Rotary Rasp

Yea, you're probably right about that. But still, the fact remains that no one has actually posted pictures of their e9x angel rings discoloring - until that happens we can't say for sure that this will ever be an issue.

Now I totally regret now taking pics of those headlights that I worked on when I saw this. I have seen yellowing from the back of the fiber optic to even the smaller ring itself being yellow.

And this doesn't apply to you guys' E92s, but I have seen LEDs actually causing burnt/melt the back of the fiber optic ring as well. It's one of the big name brand, but because I don't exactly remember which it was, I won't say it.

Originally Posted by Tomz_M3

Just run a relay from the power wire on the AE circuit. It removes the PWM issue and powers the ballast properly.

I agree with this. Without going into and discussing the merit and demerits of disabling errors, using relay effectively solves all the powering issue AND people that can't code. And like Tomz said, it's not that difficult to hide the relay well and keep it looking OEM.

How often are you popping your hood open anyway?

[dbrad]

Rotary Rasp sent you a PM,

[Rotary Rasp]

UPDATE:

After running these HIDs for almost two years, I decided it was time to upgrade to some real LEDs and black out the chrome. I can confirm that these lights can handle HIDs without ANY discoloration or deterioration. The photos I below are after 21 months and roughly 30k miles of HID angel eye use.

[Quisp]

I just picked up a 335 and the one angel eyes was only half lit. When I went to take a look the tube was clogged with bubbles and brown and yellow, like it was burnt.

http://www.e90post.com/forums/showthread.php?t=890771

general conensus was that someone had HID angel eyes in the car before me.

[ssmith96]

Anyone know if there is something like his for LCI halogen?

[SoIntoYou]

sorry to rain on your parade but going HID will burn your fiber optic rings and make it yellowish.

[E92-Lighting]

Originally Posted by SoIntoYou

sorry to rain on your parade but going HID will burn your fiber optic rings and make it yellowish.

this has been known for years and i have tried numerous times to warn potential buyers, ask yourself this question, how come never sold HID angel eyes...

[Rotary Rasp]

Did you guys even look at the photos I posted? My rings DID NOT yellow.

[LuxAngelEyes]

Originally Posted by Rotary Rasp

Did you guys even look at the photos I posted? My rings DID NOT yellow.

Depending on the HID Kit it may cause this to happen over time. Depending on the bulb it may have a high output of IR light which will cause this.

[playground]

Originally Posted by Rotary Rasp

UPDATE:

After running these HIDs for almost two years, I decided it was time to upgrade to some real LEDs and black out the chrome. I can confirm that these lights can handle HIDs without ANY discoloration or deterioration. The photos I below are after 21 months and roughly 30k miles of HID angel eye use.

they look yellow to me, your photo is just very blue.

[BostonBeemah]

Sorry to bump an old thread but apparently I got a short and now my angels don't work at all even with the stock bulbs I have found tutorials on using toolset32 and can't get it to delete the error counter. Has anyone else experienced this or found a way to fix it???

[46m3csl]

Wow, soo do these work with e90 pre lci

[Shadow007]

I've been looking for this thread for the past few days because I was trying to figure out how to bypass the light check for my HID ae. Rotary Rasp, could you tell me which type if cable I would need and software in order for me to do this? I have no experience with coding, hopefully this isn't too hard. Thanks

[BostonBeemah]

Originally Posted by BostonBeemah

Sorry to bump an old thread but apparently I got a short and now my angels don't work at all even with the stock bulbs I have found tutorials on using toolset32 and can't get it to delete the error counter. Has anyone else experienced this or found a way to fix it???

No matter what argument i put in, it refuses to clear...

Would it be possible for a coding guru to come remote access into my computer and take a stab at it please!! It would be greatly appreciated!!

[Alan328xi]

Can anyone tell me what should I Choose if the Fileds for 2011 Bmw 328xi? Halo
http://www.ddmtuning.com/Products/DD...ast-35W-or-55W

[M4rius]

fitted and coded to my e92 .thanks for great diy tread

[adrianrt]

Originally Posted by Rotary Rasp

cool, don't use ddm then.

lots of people on this forum offer free coding (including me at one time, but I no longer have time)

both problems solved.

even if you bought the coding cable ($90) and the hid kit ($40), it's still cheaper and BETTER than using one of the non-PnP hack job kits vendors sell on this forum.

Hi I'm new to BMW I was looking into coding options but here in florida it's almost impossible to find somebody to do it... You mentioned... There are free coders... How do I find them? Is it safe?? Thank you. Also can you guide me to a post or somewhere about installing valeo headlamps with angel eyes on a 2008 328xi halogen headlight without angel eyes.. I bought this.

Valeo 44812 Right Side Replacement Headlight Assembly for BMW 3-...
$290.57 On amazon... Need to know if I can install in my car without modifications or rewiring and if at all possible to run eyes as drl... Thank you

[just_dirty]

Need a little help coding these. I have an 08/06 build E92 and I tried to follow braveplayer's instructions since he has an FRM vehicle as well. The problem i'm encountering is that after i select CAS and search for the NFRM module is isn't there. Also there isn't anything that starts with NFRM under the 'change job' menu. Help!

[Alex09_335]

This seems like an awesome way to get some quality HIDs installed for AE's.

When everyone here is talking about coding the FRM are they using ISTA/P or can it be done using a more basic program like BMWhats app?

I would like to try this using Morimoto H8 HID's since they seem to be very good quality and UV filtered

[888Concept]

anyone who got their stock OEM halos burnt from using HID's, hit me up I have a few spare sets.