Three Stage Intake Manifold Conversion for 328/325

e90pilot · 09-23-2010, 12:32 PM

Yes. But you can't get it from the dealership.

accel · 09-28-2010, 01:26 AM

After reading this thread I think I can summarize that at the moment there's a couple of 325 implementations, but no attempts to apply this to 328 yet.

brocklanders · 09-28-2010, 01:42 AM

please correct me if im wrong, but from what ive read and i have not studied any of this material by any means. if you dont get the engine tuning this intake manifold does not yield much or barely any improvement. i believe it was a little torque increase and no power. there are only about three shops i would trust for that type of thing.

e90pilot · 09-28-2010, 02:36 AM

You actually lose midrange. The car might actually be slower than stock without a tune.

325xi-06 · 09-29-2010, 02:07 PM

yeah i did only the manifold. and to be hones... i don't feel any more power.

-c- · 10-19-2010, 10:05 PM

so anybody that has put this 3 stage manifold on their car, which wire goes where, I have the 2 wires that are on the side of the old 1 stage intake manifold and need to know which actuator to plug them into the 3 stage intake manifold.

basically which wire goes into the high speed actuator and which wire goes into the low speed actuator.

thanks guys.

AlpineSwift · 12-19-2010, 03:20 AM

Bump since it seems there is renewed interest by some of the new comers that haven't seen this yet.

MuzzE90xi · 01-22-2011, 05:45 PM

hey guys brand new to the forum hence the late post

. Let me just start by saying this thread is a godsend i've been dreaming about this mod since i got my 325 a few years ago but was always told it was TABOO!! Glad to hear some success stories and since my warranties up i think its worth giving it a shot. Does anyone who has completed this mod on a 325 (manifold swap + tune) have any updates on their success?! thanks

e90pilot · 01-22-2011, 06:35 PM

Check out the link in my sig.

XYR03 · 01-30-2011, 11:51 PM

Man revisiting thread makes me want to do this but it seems like no one tried it on a 328i. If anyone has connection on where to get the manifold used please post it on here. I found a 2005 manifold for a decent price. Will a 2005 330i manifold work? I actually might pull this off....finally grew some balls!! lol

DimSum · 01-31-2011, 12:02 AM

Quote:

Originally Posted by XYR03

Man revisiting thread makes me want to do this but it seems like no one tried it on a 328i. If anyone has connection on where to get the manifold used please post it on here. I found a 2005 manifold for a decent price. Will a 2005 330i manifold work? I actually might pull this off....finally grew some balls!! lol

Yes a 2005 330i Manifold will work, as long as it came off a N52 engine.

mike-y · 01-31-2011, 12:07 AM

Quote:

Originally Posted by 325xi-06

yeah i did only the manifold. and to be hones... i don't feel any more power.

Really? I definitely felt an increase in power when I swapped mine. Low end torque feels a lot better, and the top end definitely pulls more above 4000 rpm.

I don't have a tune yet, just using it with a PBX for now.

DimSum · 01-31-2011, 12:13 AM

Quote:

Originally Posted by mike-y

Really? I definitely felt an increase in power when I swapped mine. Low end torque feels a lot better, and the top end definitely pulls more above 4000 rpm.

I don't have a tune yet, just using it with a PBX for now.

Why you selling?

AlpineSwift · 01-31-2011, 12:19 AM

Quote:

Originally Posted by DimSum

Why you selling?

Thats his extra unit thats missing the 2nd actuator.

e90pilot · 01-31-2011, 12:19 AM

Quote:

Originally Posted by XYR03

Man revisiting thread makes me want to do this but it seems like no one tried it on a 328i. If anyone has connection on where to get the manifold used please post it on here. I found a 2005 manifold for a decent price. Will a 2005 330i manifold work? I actually might pull this off....finally grew some balls!! lol

Wait, you're in the US. 2005 330 was an e46 2-stage manifold that was vacuum operated. It won't work on an e90.

FlowState · 04-01-2011, 02:43 AM

Huge fallout in this thread after July 2010.

I was on the edge of my seat up until about the last 2 pages.

Interested in further discoveries. I'll have to read e90pilot's thread.

I'll be doing the manifold swap for sure sometime soon, and I'll wait out on some of the tuning options. How's the AA tune e90pilot?

As for badging - I'm gonna change from 325i to 325si

Bimmer-Bob · 04-01-2011, 04:13 AM

Quote:

Originally Posted by DUI Elite

As for badging - I'm gonna change from 325i to 325si

Yeah, that makes sense.

SR|RED · 04-01-2011, 09:26 PM

There is a pretty dramatic change for me with only the manifold done at this point. There is definitely some loss of power between 2-3K... But the car now screams going past 3K... The actuator changes are actually very noticeable. Right at 3K there is a change, and another very noticeable one at 4300 RPM.

So far it's been a week in with no problems. I'd like to jump on the AA tune sometime next week. I don't know if it was the battery reset or not, but the delivery of power seems a lot smoother now.

e90pilot · 04-03-2011, 05:32 PM

The tune's been working great. There a some small issues but I think they can be worked out easily. +30Hp and +40tq is pretty nice. I was looking at the dyno and I think there's a little more peak power available. We'll see. I've got a new job and schedule is brutal so I don't really have any time to do anything.

Handsome_Rob · 04-03-2011, 05:41 PM

I wonder if this would fit in my wifes 528...

325/528 · 04-03-2011, 07:13 PM

Quote:

Originally Posted by Handsome_Rob

I wonder if this would fit in my wifes 528...

I have it on my 528...

Handsome_Rob · 04-03-2011, 08:16 PM

Quote:

Originally Posted by 325/528

I have it on my 528...

Whhaatttt????? Dude give me the low down, por favor.

09-23-2010, 12:32 PM	#265
e90pilot Freight Dawg 105 Rep 2,103 Posts Drives: E90 325i Join Date: Jul 2005 Location: Oakland, CA iTrader: (3)	Yes. But you can't get it from the dealership. __________________ --Marcelo '06 Arctic Metallic 325i \| Sport Package \| 6MT \| Dinan Stage III suspension \| Dinan exhaust \| 330i manifold swap! Click here! \| Active Autowerke tune \| 135i Brake Calipers \| Deiselboost caliper brackets \| E46 M3 front rotors
	Appreciate 0 Quote

09-28-2010, 01:26 AM	#266
accel First Lieutenant 45 Rep 335 Posts Drives: e90 328i MT ZSP Join Date: Jan 2010 Location: SF Bay Area, CA iTrader: (0)	After reading this thread I think I can summarize that at the moment there's a couple of 325 implementations, but no attempts to apply this to 328 yet.
	Appreciate 0 Quote

09-28-2010, 01:42 AM	#267
brocklanders Major 108 Rep 1,428 Posts Drives: the uno, mineral white Join Date: Mar 2010 Location: houston iTrader: (3) Garage List 06 325 [0.00]	please correct me if im wrong, but from what ive read and i have not studied any of this material by any means. if you dont get the engine tuning this intake manifold does not yield much or barely any improvement. i believe it was a little torque increase and no power. there are only about three shops i would trust for that type of thing.
	Appreciate 0 Quote

09-28-2010, 02:36 AM	#268
e90pilot Freight Dawg 105 Rep 2,103 Posts Drives: E90 325i Join Date: Jul 2005 Location: Oakland, CA iTrader: (3)	You actually lose midrange. The car might actually be slower than stock without a tune. __________________ --Marcelo '06 Arctic Metallic 325i \| Sport Package \| 6MT \| Dinan Stage III suspension \| Dinan exhaust \| 330i manifold swap! Click here! \| Active Autowerke tune \| 135i Brake Calipers \| Deiselboost caliper brackets \| E46 M3 front rotors
	Appreciate 0 Quote

09-29-2010, 02:07 PM	#269
325xi-06 manifold conversion 325/330 5 Rep 99 Posts Drives: 325xi 06 Join Date: Nov 2009 Location: Faroe islands iTrader: (0)	yeah i did only the manifold. and to be hones... i don't feel any more power.
	Appreciate 0 Quote

10-19-2010, 10:05 PM	#270
-c- Colonel 912 Rep 2,742 Posts Drives: bmw Join Date: May 2010 Location: Chicago iTrader: (5)	so anybody that has put this 3 stage manifold on their car, which wire goes where, I have the 2 wires that are on the side of the old 1 stage intake manifold and need to know which actuator to plug them into the 3 stage intake manifold. basically which wire goes into the high speed actuator and which wire goes into the low speed actuator. thanks guys.
	Appreciate 0 Quote

12-19-2010, 03:20 AM	#271
AlpineSwift Colonel 78 Rep 2,114 Posts Drives: 2008 335Xi Coupé Join Date: Feb 2010 Location: Castle Rock, CO iTrader: (3)	Bump since it seems there is renewed interest by some of the new comers that haven't seen this yet. __________________ E92 '08 335Xi 6AT - Cobb AP3 Tuned by MAC Autosport, Original Prototype Xi DOCRace 6266 Single Turbo Swap, VRSF CP w/Synapse BOV, VRSF 7" FMIC, BMS Cowl, H&R Coilovers, Renn Motorsport RS-51's, Stoptech Stage 2 Slotted, xHP Stage 3, Earl's Racing Oil Cooler, Turner Boost Gauge, M3 Lip Spoiler. Standing Mile Record Holder for Xi over a mile high: 168.2MPH @ 5512'; The Colorado Mile hosted by The US Mile.
	Appreciate 0 Quote

01-22-2011, 05:45 PM	#272
MuzzE90xi new member 0 Rep 2 Posts Drives: E90 325xi Join Date: Jan 2011 Location: New York iTrader: (0)	hey guys brand new to the forum hence the late post . Let me just start by saying this thread is a godsend i've been dreaming about this mod since i got my 325 a few years ago but was always told it was TABOO!! Glad to hear some success stories and since my warranties up i think its worth giving it a shot. Does anyone who has completed this mod on a 325 (manifold swap + tune) have any updates on their success?! thanks
	Appreciate 0 Quote

01-22-2011, 06:35 PM	#273
e90pilot Freight Dawg 105 Rep 2,103 Posts Drives: E90 325i Join Date: Jul 2005 Location: Oakland, CA iTrader: (3)	Check out the link in my sig. __________________ --Marcelo '06 Arctic Metallic 325i \| Sport Package \| 6MT \| Dinan Stage III suspension \| Dinan exhaust \| 330i manifold swap! Click here! \| Active Autowerke tune \| 135i Brake Calipers \| Deiselboost caliper brackets \| E46 M3 front rotors
	Appreciate 0 Quote

01-30-2011, 11:51 PM	#274
XYR03 Lieutenant Colonel 125 Rep 1,673 Posts Drives: Cayman S Join Date: Sep 2007 Location: Charlotte, NC iTrader: (6)	Man revisiting thread makes me want to do this but it seems like no one tried it on a 328i. If anyone has connection on where to get the manifold used please post it on here. I found a 2005 manifold for a decent price. Will a 2005 330i manifold work? I actually might pull this off....finally grew some balls!! lol __________________ [SIGPIC]2015-Cayman S (Can't leave bimmerpost) 2009-E92 M3 2005-E46 M3 1998-E36 M3 2007-E92 328i[/SIGPIC]
	Appreciate 0 Quote

04-01-2011, 02:43 AM	#280
FlowState ///M Driver 90 Rep 1,955 Posts Drives: 07 JB E90 335, 20 TRM F97 X3M Join Date: Jan 2011 Location: Chicago, IL iTrader: (4)	Huge fallout in this thread after July 2010. I was on the edge of my seat up until about the last 2 pages. Interested in further discoveries. I'll have to read e90pilot's thread. I'll be doing the manifold swap for sure sometime soon, and I'll wait out on some of the tuning options. How's the AA tune e90pilot? As for badging - I'm gonna change from 325i to 325si
	Appreciate 0 Quote

04-01-2011, 09:26 PM	#282
SR\|RED Private 10 Rep 66 Posts Drives: 92' 180SX Join Date: Feb 2009 Location: Calgary iTrader: (0)	There is a pretty dramatic change for me with only the manifold done at this point. There is definitely some loss of power between 2-3K... But the car now screams going past 3K... The actuator changes are actually very noticeable. Right at 3K there is a change, and another very noticeable one at 4300 RPM. So far it's been a week in with no problems. I'd like to jump on the AA tune sometime next week. I don't know if it was the battery reset or not, but the delivery of power seems a lot smoother now.
	Appreciate 0 Quote

04-03-2011, 05:32 PM	#283
e90pilot Freight Dawg 105 Rep 2,103 Posts Drives: E90 325i Join Date: Jul 2005 Location: Oakland, CA iTrader: (3)	The tune's been working great. There a some small issues but I think they can be worked out easily. +30Hp and +40tq is pretty nice. I was looking at the dyno and I think there's a little more peak power available. We'll see. I've got a new job and schedule is brutal so I don't really have any time to do anything. __________________ --Marcelo '06 Arctic Metallic 325i \| Sport Package \| 6MT \| Dinan Stage III suspension \| Dinan exhaust \| 330i manifold swap! Click here! \| Active Autowerke tune \| 135i Brake Calipers \| Deiselboost caliper brackets \| E46 M3 front rotors
	Appreciate 0 Quote

04-03-2011, 05:41 PM	#284
Handsome_Rob Private First Class 4 Rep 142 Posts Drives: 535i w/6spd! Join Date: Apr 2009 Location: South La to south Al iTrader: (0)	I wonder if this would fit in my wifes 528...
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search