BMW CODING success

dsl55dsl · 10-06-2011, 04:49 PM

Quote:

Originally Posted by everlast

The cable from automotive scan tools on ebay comes with the adapter to run on old or new cars, and lists in the auction to 2010 cars. 2011 should work fine too.

http://www.ebay.com/itm/BMW-INPA-Edi..._Tools&vxp=mtr

I just offered $90 on this cable and it was accepted, fyi.

Will try the same.... thank you,

Free Shipping also.

Knob · 10-08-2011, 09:30 AM

Quote:

Originally Posted by AW128i

My car does have the FRM2 module and I'm probably going to be picking up the Depo lights in the near future. What coding change(s) did you make to enable the AEs on the Depo lights as the DRLs?

VERHALTEN_DRL_TFL from drl_tfl_off to drl_s

And actiavate DRL in your BC, if you don´t have this option you can activate in you KOMBI module via TAG_LICHT_AN/TAG_LICHT_AUS - aktiv

AW128i · 10-08-2011, 04:20 PM

Quote:

Originally Posted by Knob

VERHALTEN_DRL_TFL from drl_tfl_off to drl_s

And actiavate DRL in your BC, if you don´t have this option you can activate in you KOMBI module via TAG_LICHT_AN/TAG_LICHT_AUS - aktiv

My car already has the DRL option in the BC, as do all U.S. E8X cars, so I guess it's just a matter of changing the VERHALTEN line as you mentioned. Thanks!!

AW128i · 10-08-2011, 04:44 PM

Quote:

Originally Posted by Knob

VERHALTEN_DRL_TFL from drl_tfl_off to drl_s

And actiavate DRL in your BC, if you don´t have this option you can activate in you KOMBI module via TAG_LICHT_AN/TAG_LICHT_AUS - aktiv

One other thing, my FRM2 module currently shows VERHALTEN_DRL_TFL coded as "drl_h." I know that if I turn the DRLs on via the BC, the main beam is used as the DRL. So, any idea what the "h" represents?

NiVeDh · 10-08-2011, 09:59 PM

Quote:

Originally Posted by AW128i

One other thing, my FRM2 module currently shows VERHALTEN_DRL_TFL coded as "drl_h." I know that if I turn the DRLs on via the BC, the main beam is used as the DRL. So, any idea what the "h" represents?

I think the "h" probably means high beam flashers. Change it to "drl_s" if you want the angel eyes to be DRL.

gaifaun · 10-09-2011, 02:21 AM

successfully coded my car! thank you so much for the all your help

.

I coded Digital Speed display, Follow me home lighting, and window safety feature so far...

QUESTION: I want to delete the LED sidemarkers for my 2010 E90 LCI headlights. I cannot find the code in the NFRM module. All the sidemarker options in the google docs spreadsheet fail to show a method for LCI sedan models. Any insight would be appreciated!

also I tried coding the folding mirrors through fob for my 2010 LCI E90 and i changed the value of this (ASP_KOMFORT_EINKLAPP) to activ but it still doesn't work. Any ideas why? the other coding i mentioned earlier worked without a hiccup.

thanks in advance for the help

jphughan · 10-09-2011, 10:47 AM

Quote:

Originally Posted by gaifaun

successfully coded my car! thank you so much for the all your help

.

I coded Digital Speed display, Follow me home lighting, and window safety feature so far...

QUESTION: I want to delete the LED sidemarkers for my 2010 E90 LCI headlights. I cannot find the code in the NFRM module. All the sidemarker options in the google docs spreadsheet fail to show a method for LCI sedan models. Any insight would be appreciated!

also I tried coding the folding mirrors through fob for my 2010 LCI E90 and i changed the value of this (ASP_KOMFORT_EINKLAPP) to activ but it still doesn't work. Any ideas why? the other coding i mentioned earlier worked without a hiccup.

thanks in advance for the help

First, make sure you set the mirrors option to "aktiv", not "activ", but it also only works if you also code rolling up the windows with the fob. For your LED marker, look for any of the following -- depending on the setting, they may need to be set to aktiv, nicht_aktiv, or one of the wert options. Check the spreadsheet:

PO_RL_FKT_MIT_SL_V
PWM_FL_ALS_CORNERLIGHT
PWM_POL_BEI_AKTIVEN_AL
PWM_POL_BEI_AKTIVEN_FL
PWM_SL_V
SL_FKT_MIT_POL
PWM_SL_V_BEI_AKTIVEN_AL
PWM_SL_V_BEI_AKTIVEN_FL
SL_BL_ERS_DEF_RL_BL_1
SL_V_PO_RL_FKT
SIDEMARKER_US
SIDEMARKER_US_NFRM
SIDEMARKER_US_NF
SIDEMARKER_US_MIT_FRA_V

Pete Schweaty · 10-09-2011, 01:55 PM

Just coded my first function! I ran into a little trouble but was back in business as soon as I updated my daten files. My question is, now that everything is set up, can I just start at step 52 where it says Load file FSW_PSW_MAN??? or do I have to do the whole thing over every time?

jphughan · 10-09-2011, 02:30 PM

Quote:

Originally Posted by Pete Schweaty

Just coded my first function! I ran into a little trouble but was back in business as soon as I updated my daten files. My question is, now that everything is set up, can I just start at step 52 where it says Load file FSW_PSW_MAN??? or do I have to do the whole thing over every time?

You can start at loading the NCS profile.

Pete Schweaty · 10-09-2011, 03:10 PM

Thanks

nineofspades · 10-09-2011, 03:12 PM

So it looks like my service counters got reset.. Is there any way to set them back to what they were...

Additionaly, is there any way to know what they were?

gaifaun · 10-09-2011, 03:42 PM

Quote:

Originally Posted by jphughan

First, make sure you set the mirrors option to "aktiv", not "activ", but it also only works if you also code rolling up the windows with the fob. For your LED marker, look for any of the following -- depending on the setting, they may need to be set to aktiv, nicht_aktiv, or one of the wert options. Check the spreadsheet:

PO_RL_FKT_MIT_SL_V
PWM_FL_ALS_CORNERLIGHT
PWM_POL_BEI_AKTIVEN_AL
PWM_POL_BEI_AKTIVEN_FL
PWM_SL_V
SL_FKT_MIT_POL
PWM_SL_V_BEI_AKTIVEN_AL
PWM_SL_V_BEI_AKTIVEN_FL
SL_BL_ERS_DEF_RL_BL_1
SL_V_PO_RL_FKT
SIDEMARKER_US
SIDEMARKER_US_NFRM
SIDEMARKER_US_NF
SIDEMARKER_US_MIT_FRA_V

Thanks for your help, I will try out those values asap. I'm pretty sure I tried all the values, but I will double check.

as for the mirrors, I just didn't know how to use them initially. I got them to work with with CA. It is really cool. After I code windows up with fob, the mirrors should work with fob also.

Boostin FD · 10-09-2011, 04:18 PM

Damn CIC. E92 m3
Last week some kind of module died in my car in which case stereo nor radio nor anything coming from the screen would work.

Dealer replaced the module and also recoded my CIC with some software. So now I can't read the CIC at all. Before went to the dealer using daten v41 software worked fine... Now, I have tried v41, v39, v42 and always this same error:

Error in CABD! Look at CABI.ERR and ERROR.LOG
COAPI-2041: wrong ecu coding index
A_CIC: CODIERINDEX = 1AH

Anybody have any idea what's going on? Every other module works except this one.

Thanks guys.

jphughan · 10-09-2011, 04:38 PM

Quote:

Originally Posted by Boostin FD

Damn CIC. E92 m3
Last week some kind of module died in my car in which case stereo nor radio nor anything coming from the screen would work.

Dealer replaced the module and also recoded my CIC with some software. So now I can't read the CIC at all. Before went to the dealer using daten v41 software worked fine... Now, I have tried v41, v39, v42 and always this same error:

Error in CABD! Look at CABI.ERR and ERROR.LOG
COAPI-2041: wrong ecu coding index
A_CIC: CODIERINDEX = 1AH

Anybody have any idea what's going on? Every other module works except this one.

Thanks guys.

When you tried the V42 daten did you also grab the updated ECU files from the V42 package and put them into your \EDIABAS\ECU folder?

Boostin FD · 10-09-2011, 05:03 PM

Yes sir. Ran the laden.bat file then copied the ecu and sgdat to appropriate places. Always that error. No idea what's going on... Any way to check what version of CIC I have sock know which files I should use?

I mean should v42 work. Anyone else have this issue with 09 m3?

pwrplaya · 10-10-2011, 06:05 PM

Quote:

Originally Posted by Boostin FD

Damn CIC. E92 m3
Last week some kind of module died in my car in which case stereo nor radio nor anything coming from the screen would work.

Dealer replaced the module and also recoded my CIC with some software. So now I can't read the CIC at all. Before went to the dealer using daten v41 software worked fine... Now, I have tried v41, v39, v42 and always this same error:

Error in CABD! Look at CABI.ERR and ERROR.LOG
COAPI-2041: wrong ecu coding index
A_CIC: CODIERINDEX = 1AH

Anybody have any idea what's going on? Every other module works except this one.

Thanks guys.

I got a similar error using SP-Daten V41:

Error in CABD! Look at CABI.ERR and ERROR.LOG!
COAPI-2000: EDIABS or SGBD error
BIP-0009: BEST VERSION ERROR

I just downloaded the 18mb V42 files. Going to give it a try tomorrow.

Pete Schweaty · 10-10-2011, 06:17 PM

Quote:

Originally Posted by jphughan

I uploaded V42 to Rapidshare: https://rapidshare.com/files/2197995..._Daten_V42.rar

Try this. It's much smaller than the 18mb version and works on the e90.

Boostin FD · 10-10-2011, 06:51 PM

Those didn't work either... I guess got to see about getting v43. Another odd thing dealer did with the new update... If you don't have seatbelt on, DCT will not stay in gear and it will go in neutral. Behaves the same way as if the door is open.

I checked with the dealer as I thought there was a problem with DCT... They confirmed it's new update. Strange thing is, my seatbelt gong is disabled... But I guess that doesn't matter.

jphughan · 10-10-2011, 07:09 PM

Quote:

Originally Posted by Boostin FD

Those didn't work either... I guess got to see about getting v43. Another odd thing dealer did with the new update... If you don't have seatbelt on, DCT will not stay in gear and it will go in neutral. Behaves the same way as if the door is open.

I checked with the dealer as I thought there was a problem with DCT... They confirmed it's new update. Strange thing is, my seatbelt gong is disabled... But I guess that doesn't matter.

Yep, there's a thread on M3Post about this new "feature". The seatbelt gong isn't the same as the seatbelt sensor, which I wouldn't recommend disabling since I know the airbags take into account whether seatbelts are fastened when they determine how (or whether) to deploy.

Oh, and insert obligatory "Wouldn't have that problem with 6MT."

Boostin FD · 10-10-2011, 07:24 PM

Hahaha heard it all about 6MT. I like my DCT though ;-)

Mandla · 10-12-2011, 06:27 AM

Guys I Am From South Africa And I Need To By The Complete Coding Kit With Manuals, But I Cnat Seem To Find A Shop That Sells The Equipment. I Cant Even Download The Software That You Post On The Forum, When I Try I Just See A Blank Page. Can Anyone Help Me.

Pete Schweaty · 10-12-2011, 10:41 AM

Quick question about coding. After I set up the initial stuff as in the DIY, all I have to do is start at step 53 and load FSW PSW MAN, right? The TRC file should still be there and NCS should be able to follow it?

Also, I have the v42 of the daten files but cant seem to get into the NFRM module. I can get into CAS and KOMBI (maybe others too, havent tried yet). I get the following error when I try to read the NFRM:

Error In CABD! Look at Cabi.ERR and Error.LOG
COAPI-2000 EDIABAS or SGBD Error
BJP-009: Best Version Error

Anybody know what that means?

10-09-2011, 02:21 AM	#3328
gaifaun Major 217 Rep 1,134 Posts Drives: E90 335i LCI Join Date: Apr 2007 Location: Greater Vancouver iTrader: (14) Garage List 2010 E90 335i LCI [10.00]	successfully coded my car! thank you so much for the all your help . I coded Digital Speed display, Follow me home lighting, and window safety feature so far... QUESTION: I want to delete the LED sidemarkers for my 2010 E90 LCI headlights. I cannot find the code in the NFRM module. All the sidemarker options in the google docs spreadsheet fail to show a method for LCI sedan models. Any insight would be appreciated! also I tried coding the folding mirrors through fob for my 2010 LCI E90 and i changed the value of this (ASP_KOMFORT_EINKLAPP) to activ but it still doesn't work. Any ideas why? the other coding i mentioned earlier worked without a hiccup. thanks in advance for the help
	Appreciate 0 Quote

10-09-2011, 01:55 PM	#3330
Pete Schweaty Captain 39 Rep 641 Posts Drives: 2014 750li Join Date: Jun 2011 Location: MD iTrader: (0)	Just coded my first function! I ran into a little trouble but was back in business as soon as I updated my daten files. My question is, now that everything is set up, can I just start at step 52 where it says Load file FSW_PSW_MAN??? or do I have to do the whole thing over every time?
	Appreciate 0 Quote

10-09-2011, 03:10 PM	#3332
Pete Schweaty Captain 39 Rep 641 Posts Drives: 2014 750li Join Date: Jun 2011 Location: MD iTrader: (0)	Thanks
	Appreciate 0 Quote

10-09-2011, 03:12 PM	#3333
nineofspades Private First Class 50 Rep 131 Posts Drives: SSII F80 M3 Join Date: Jun 2011 Location: USA iTrader: (0)	So it looks like my service counters got reset.. Is there any way to set them back to what they were... Additionaly, is there any way to know what they were?
	Appreciate 0 Quote

10-09-2011, 04:18 PM	#3335
Boostin FD Bored all the time 398 Rep 2,177 Posts Drives: Batmobile Join Date: Jan 2010 Location: Kirkwood iTrader: (2)	Damn CIC. E92 m3 Last week some kind of module died in my car in which case stereo nor radio nor anything coming from the screen would work. Dealer replaced the module and also recoded my CIC with some software. So now I can't read the CIC at all. Before went to the dealer using daten v41 software worked fine... Now, I have tried v41, v39, v42 and always this same error: Error in CABD! Look at CABI.ERR and ERROR.LOG COAPI-2041: wrong ecu coding index A_CIC: CODIERINDEX = 1AH Anybody have any idea what's going on? Every other module works except this one. Thanks guys. __________________ Current: 2014 991 Turbo RS Past: 15 GT3, 17 R8 SC, Two 16 M4 GTS’s, Two 18 GT350R's, Two 13 RS5’s, 13 M3, 10 R8, 15 M4, 09 M3, 04 M3, 09 S5, 02 M3... It all started with an RX-7 (FD).
	Appreciate 0 Quote

10-09-2011, 05:03 PM	#3337
Boostin FD Bored all the time 398 Rep 2,177 Posts Drives: Batmobile Join Date: Jan 2010 Location: Kirkwood iTrader: (2)	Yes sir. Ran the laden.bat file then copied the ecu and sgdat to appropriate places. Always that error. No idea what's going on... Any way to check what version of CIC I have sock know which files I should use? I mean should v42 work. Anyone else have this issue with 09 m3? __________________ Current: 2014 991 Turbo RS Past: 15 GT3, 17 R8 SC, Two 16 M4 GTS’s, Two 18 GT350R's, Two 13 RS5’s, 13 M3, 10 R8, 15 M4, 09 M3, 04 M3, 09 S5, 02 M3... It all started with an RX-7 (FD).
	Appreciate 0 Quote

10-10-2011, 06:51 PM	#3340
Boostin FD Bored all the time 398 Rep 2,177 Posts Drives: Batmobile Join Date: Jan 2010 Location: Kirkwood iTrader: (2)	Those didn't work either... I guess got to see about getting v43. Another odd thing dealer did with the new update... If you don't have seatbelt on, DCT will not stay in gear and it will go in neutral. Behaves the same way as if the door is open. I checked with the dealer as I thought there was a problem with DCT... They confirmed it's new update. Strange thing is, my seatbelt gong is disabled... But I guess that doesn't matter. __________________ Current: 2014 991 Turbo RS Past: 15 GT3, 17 R8 SC, Two 16 M4 GTS’s, Two 18 GT350R's, Two 13 RS5’s, 13 M3, 10 R8, 15 M4, 09 M3, 04 M3, 09 S5, 02 M3... It all started with an RX-7 (FD).
	Appreciate 0 Quote

10-10-2011, 07:24 PM	#3342
Boostin FD Bored all the time 398 Rep 2,177 Posts Drives: Batmobile Join Date: Jan 2010 Location: Kirkwood iTrader: (2)	Hahaha heard it all about 6MT. I like my DCT though ;-) __________________ Current: 2014 991 Turbo RS Past: 15 GT3, 17 R8 SC, Two 16 M4 GTS’s, Two 18 GT350R's, Two 13 RS5’s, 13 M3, 10 R8, 15 M4, 09 M3, 04 M3, 09 S5, 02 M3... It all started with an RX-7 (FD).
	Appreciate 0 Quote

10-12-2011, 06:27 AM	#3343
Mandla Registered 0 Rep 4 Posts Drives: BMW 3 SERIES 2006 MODEL Join Date: Oct 2011 Location: WITBANK iTrader: (0)	Guys I Am From South Africa And I Need To By The Complete Coding Kit With Manuals, But I Cnat Seem To Find A Shop That Sells The Equipment. I Cant Even Download The Software That You Post On The Forum, When I Try I Just See A Blank Page. Can Anyone Help Me.
	Appreciate 0 Quote

10-12-2011, 10:41 AM	#3344
Pete Schweaty Captain 39 Rep 641 Posts Drives: 2014 750li Join Date: Jun 2011 Location: MD iTrader: (0)	Quick question about coding. After I set up the initial stuff as in the DIY, all I have to do is start at step 53 and load FSW PSW MAN, right? The TRC file should still be there and NCS should be able to follow it? Also, I have the v42 of the daten files but cant seem to get into the NFRM module. I can get into CAS and KOMBI (maybe others too, havent tried yet). I get the following error when I try to read the NFRM: Error In CABD! Look at Cabi.ERR and Error.LOG COAPI-2000 EDIABAS or SGBD Error BJP-009: Best Version Error Anybody know what that means?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search