[Vongolet]

Originally Posted by Delusive

Sold most of my aftermarket parts, last picture I posted is my car stock just lowered with these wheels minus the M3 sidemirrors. They are Gloss Gunmetal.

Sorry to hear car was beautiful! May one ask what the specs you were running was? Fronts almost look deeper then rear.

[GabeS]

I couldn't see the picture you posted . so sorry if I was off on the fitment you wanted

[deadkenshin]

Originally Posted by GabeS

I couldn't see the picture you posted . so sorry if I was off on the fitment you wanted

sorry i posted them from my phone i knew it probably wouldn't work. anyway here's what im aiming for


https://pbs.twimg.com/media/CwoquryUQAATzx8.jpg
https://pbs.twimg.com/media/CvgX-xSVUAAPnu4.jpg

[deadkenshin]

click on the two links that are under those images for a 360 degree view. i tried asking him directly what his specs were but he wouldn't answer me for some reason causing so much more hassle than needed, acting like it was classified information or something

[GabeS]

That's a tucked stance, you can do the Nissan sizing that I mentioned. aak for the most aggressive sizing in they come in 10.5 x22 offset for the front but you probably want a 10" or 9.5 to tuck it, the 10.5 pokes a little.
And for the rears the 11.5x +20ish offset ,
right now I don't see the 11.5 size available online but if you call Varstoen or maybe even better call my boys at Sonic Motors in Cali, ask for Carl and say GabeS14 from the forums sent you.
they have them in 11.5 in a low +12-20 offset which will fit close to the one in your picture, depending on how aggressive you want it to look you could add a half inch spacer to make it super fitted, assuming you have an M, if yours is not an M you won't need the spacer.
Don't quote me on the offsets but basically it'll fit exactly like the one you posted.

[deadkenshin]

Originally Posted by GabeS

That's a tucked stance, you can do the Nissan sizing that I mentioned. aak for the most aggressive sizing in they come in 10.5 x22 offset for the front but you probably want a 10" or 9.5 to tuck it, the 10.5 pokes a little.
And for the rears the 11.5x +20ish offset ,
right now I don't see the 11.5 size available online but if you call Varstoen or maybe even better call my boys at Sonic Motors in Cali, ask for Carl and say GabeS14 from the forums sent you.
they have them in 11.5 in a low +12-20 offset which will fit close to the one in your picture, depending on how aggressive you want it to look you could add a half inch spacer to make it super fitted, assuming you have an M, if yours is not an M you won't need the spacer.
Don't quote me on the offsets but basically it'll fit exactly like the one you posted.

yeet yeet thank you very much for the quick reply! okay then i think i'll go with 9.5s in front and 10.5s with a spacer. btw i really like your widebody its pretty fresh man many props. oh also what rate springs do you recommend? i would be as low as the car in the pics but probably 2" higher both front and back because obviously he's laying frame in the pics. would i still need super stiff even though its tucking rather than "stanced"?

[GabeS]

Its been so long I dont remember my spring rates, but since you are not poking in the rear you won't have that much trouble the trouble starts when your tucking and running fatter tires or when poking rim and the fender hits the rim.

[ThugzZ BunnY]

deadkenshin if you go low without stretch, you will either have shit fitment and it will look bad, or you will destroy your fenders. I ran a 19x9.5 +22 with a 235/35 tire and it pretty much ate away my bumper and fender from rubbing. that was with about an inch from wheel to fender. I now have a 225/35 tire WITH a spacer and im not rubbing anymore. -2.5 camber as well.

[deadkenshin]

Originally Posted by Eddimon0088

BBS 16>18 & Bagged

What lip?

[deadkenshin]

Originally Posted by ThugzZ BunnY

deadkenshin if you go low without stretch, you will either have shit fitment and it will look bad, or you will destroy your fenders. I ran a 19x9.5 +22 with a 235/35 tire and it pretty much ate away my bumper and fender from rubbing. that was with about an inch from wheel to fender. I now have a 225/35 tire WITH a spacer and im not rubbing anymore. -2.5 camber as well.

Thanks a lot for the info! I'll keep that in mind when I'm buying tires. I don't mind stretch but I kind of wanted to avoid it but minimal tire stretch is okay with me

[deadkenshin]

Originally Posted by Nicke

Just shot a short vid of my rear wheels movement on a bad bumpy road. Setup is not agressive stance but somewhat flush. Rear fenders are not rolled. Setup specs in video.

Wheel specs on the front and back please? Video only shows rear specs

[weebmeister]

Fitted my new winter wheels yesterday! Fender to lip

[Digitalize]

Looks awesome!

[TBN54]

Originally Posted by Delusive

Here's pictures of how my car used to look like.

How'd you make this fit? Wheel/Tire specs?

[Nicke]

Originally Posted by deadkenshin

Wheel specs on the front and back please? Video only shows rear specs

Fronts are 19*8,5 et 32 with 225/35/19 and stock camber. Plenty of room everywhere. I did try a 13mm spacer up front and seemed fine and was very flush but I didn't drive many km like that.

Backs in this pic are like in video (19*9,5 with 255/30 tires) but with 13mm spacer. Stock camber.

[Delusive]

Originally Posted by Vongolet

Sorry to hear car was beautiful! May one ask what the specs you were running was? Fronts almost look deeper then rear.

Originally Posted by TBN54

How'd you make this fit? Wheel/Tire specs?

I just put them on since my previous wheels I ran were +17 all around. Specs are 19x9.5 +22 215/35 & 19x11 +25 265/30, they both have the same concaveness it's just at angles they don't look the same.

[deadkenshin]

Originally Posted by weebmeister

Fitted my new winter wheels yesterday! Fender to lip

Lookin fresh as fuck man many props. Wheels specs? Fenders rolled?

[Sco Cuddie]

Originally Posted by weebmeister

Fitted my new winter wheels yesterday! Fender to lip

What style wheels are these? Off of what BMW? Looks clean!

[TROSEKREW]

Agreed^ not sure ive seen these

[Fifty3bags]

Originally Posted by Sco Cuddie

What style wheels are these? Off of what BMW? Looks clean!

They're BMW Style 128 wheels

[Globoy]

[mantis]

Originally Posted by weebmeister

Fitted my new winter wheels yesterday! Fender to lip