[e90m3japan]

Originally Posted by eddunn

I am also having this issue, I do not understand the proper install sequence on this driver. There is no exe file to run and I have no idea how to install this.

maybe it will help..

http://www.e90post.com/forums/showpo...postcount=1134
I think this one has EXE.

[RectalItching]

Eddun

I figured out my mistake. You must have the cable plugged in! AND update the usb drivers! Or the USB serial port wont show up. that is the one you would be changing the settings on. Once it works, Latency settings WILL show up.

As for the usb drivers heres what you do. use those drivers JPhughan mentioned from that web link. whats not important is whats in those files. Pay attention to the usb driver RAR. unzip that to your C drive.
IMportant part. so plug your cable in as stated. under device manager find the usb serial connection and right click. click on UPDATE DRIVER. install it manually when prompted, so you can Browse to your C drive. click ok on our C drive and it will try to locate drivers there for the update. This should work.

[RectalItching]

Originally Posted by jphughan
Make sure you get the USB Driver.rar file from here: http://www.osefactory.com/tools/k+dcan/. Extract those and then use Device Manager to select the cable, click Update Driver, and tell Windows to look where you extracted the files. Do NOT use any installer apps. Otherwise, you used those files and that method and it crashed your system, just try again.

as stated, the reason the cable dont work out of the box is because its for a bmw cable .


Does anyone know if my 1 rad module is my radio coding instead of 2urad module? bcan ayone who has factory HI Fi system upload their VO?
im attempting to code Top Hi fi to HI fi and i have deleted 677 and added 676 but its not working. for changing VO you have to code twice but i dont have the 2urad module, just the 1rad

[eddunn]

Rectal,

Well that solved my issue with the usb, but now it appears that EDIABAS didn't install properly. When I try to install it I get a message saying there isn't LHZ archive found. I have no idea how to fix this...

[M BROK3]

Anyone know how to disable 3 small Corner LED on headlights on 2012 LCI e92, i've done it on pre-lci but can't seem to figure out the LCI.

[e90m3japan]

Originally Posted by x-ception

Anyone know how to disable 3 small Corner LED on headlights on 2012 LCI e92, i've done it on pre-lci but can't seem to figure out the LCI.

Here, this was done to 2011 model with frm3 so it should work on yours!

On a 2011 E92 M3 with old headlights but FRM3 (2011 M3 did not receive the LCI headlights like on the regular E92/93):

Module: NFRM

Welcome light amber led delete:
"WL_POL_3R" -> nicht_aktiv

For the amber LED w/ headlight

"PWM_POL_BEI_AKTIVEN_AL" -> wert_04 [this might be low beam]
"PWM_POL_BEI_AKTIVEN_FL" -> wert_04 [this might be high beam]

To turn off the amber LED on parking light:

"SL_FKT_MIT_POL" -> nicht_aktiv

[cn555ic]

Originally Posted by x-ception

Anyone know how to disable 3 small Corner LED on headlights on 2012 LCI e92, i've done it on pre-lci but can't seem to figure out the LCI.

Cant do it...No one has done it.

[NiVeDh]

Originally Posted by x-ception

Anyone know how to disable 3 small Corner LED on headlights on 2012 LCI e92, i've done it on pre-lci but can't seem to figure out the LCI.

Please post your FRM trace file, as an attachment.

[M BROK3]

Originally Posted by e90m3japan

Here, this was done to 2011 model with frm3 so it should work on yours!

On a 2011 E92 M3 with old headlights but FRM3 (2011 M3 did not receive the LCI headlights like on the regular E92/93):

Module: NFRM

Welcome light amber led delete:
"WL_POL_3R" -> nicht_aktiv

For the amber LED w/ headlight

"PWM_POL_BEI_AKTIVEN_AL" -> wert_04 [this might be low beam]
"PWM_POL_BEI_AKTIVEN_FL" -> wert_04 [this might be high beam]

To turn off the amber LED on parking light:

"SL_FKT_MIT_POL" -> nicht_aktiv

thx will try that tonight

Originally Posted by cn555ic

Cant do it...No one has done it.

Originally Posted by NiVeDh

Please post your FRM trace file, as an attachment.

If the above method doesn't work I will post the file. Thank you.

[cn555ic]

Originally Posted by x-ception

thx will try that tonight







If the above method doesn't work I will post the file. Thank you.

Works for E90s but not for the coupes. If it does I will buy you a Starbucks ice coffee

[edwinm3]

Anyone has a link to download INPA in english?

[cn555ic]

Originally Posted by x-ception

thx will try that tonight







If the above method doesn't work I will post the file. Thank you.

Works for E90s but not for the coupes. If it does I will buy you a Starbucks ice coffee

[e90m3japan]

Originally Posted by x-ception

thx will try that tonight







If the above method doesn't work I will post the file. Thank you.

if the above ones don't work try these also

LED_BLINKER_VORNE
nicht_aktiv
SIDEMARKER_US_MIT_FRA_V
nicht_aktiv
SL_FKT_MIT_POL
nicht_aktiv
PWM_POL
wert_04
PWM_POL_BEI_AKTIVEN_AL
wert_04
PWM_POL_BEI_AKTIVEN_FL
wert_04
WL_POL_3R
nicht_aktiv

PWM_FRA_V_FKT_SIDEMARKER
wrt_01 -> wrt_04

[fradzz]

Originally Posted by E90PAT

+1 !

Old thread, but I'm trying to come up to speed here and there's a lot of info to take in here.
You still around and in Dade County?
I'm going to continue reading this post as I'm reading posts from 2010 and there's lots of pages left, but to learn coding, that's the ticket!
I'll be better versed on the subject soon. I'm new to the blog and would like to start friending members who are in the same general Bimmer area (3's).
I'm in Atlanta and drive an 06 330i (white with (dark) dakota inside) that's still factory everything. Simply one of the greatest cars ever. Ever.

[dl123]

I have a 2008 BMW 535i and would like to code my bmw will your instructions for the e90 also work for the e60.

[E90PAT]

Originally Posted by fradzz

Old thread, but I'm trying to come up to speed here and there's a lot of info to take in here.
You still around and in Dade County?
I'm going to continue reading this post as I'm reading posts from 2010 and there's lots of pages left, but to learn coding, that's the ticket!
I'll be better versed on the subject soon. I'm new to the blog and would like to start friending members who are in the same general Bimmer area (3's).
I'm in Atlanta and drive an 06 330i (white with (dark) dakota inside) that's still factory everything. Simply one of the greatest cars ever. Ever.

Yeah I'm from broward county just north from dade. You're better off reading the DIY and going as far as you can on your own as possible then come back here and search when you get stuck on something. It'll save you loads do time since most of the things posted in this thread are simple problems.

[fradzz]

Originally Posted by E90PAT

Yeah I'm from broward county just north from dade. You're better off reading the DIY and going as far as you can on your own as possible then come back here and search when you get stuck on something. It'll save you loads do time since most of the things posted in this thread are simple problems.

Cool thanks dude. I'll be reading the threads for a couple months before I jump in. Just relived to see the conversations about coding.
I've got the Bentley manual. But if you can't do code, you can't work on anything with Idrive.
Almost bought the Snap-On scanner. Worthless for Idrive esp when you gotta buy the 'german' upgrade for another $1500.
I was in Port St Lucie (St Lucie county) over Memorial day. Looked at some properties. ATL is too cold in Jan! But lots of quiet rides in St Lucie county, who I gonna run with?

[dl123]

I am looking to buy a cable and found this one http://www.ebay.com/itm/BMW-INPA-Edi...26ea00&vxp=mtr on ebay and would like to know if it will work to code my e60 bmw. Also i wanted to use my laptop to do the coding but when i go into device managers i dont see any ports, i dont have a com1 port on my laptop is there a way to figure something out or do i have to find a computer with a com1 port?? Thank you.

[Frenk]

Originally Posted by dl123

I am looking to buy a cable and found this one http://www.ebay.com/itm/BMW-INPA-Edi...26ea00&vxp=mtr on ebay and would like to know if it will work to code my e60 bmw. Also i wanted to use my laptop to do the coding but when i go into device managers i dont see any ports, i dont have a com1 port on my laptop is there a way to figure something out or do i have to find a computer with a com1 port?? Thank you.

from what I see, the link you posted, it's a USB cable

[Pseudo Nim]

Originally Posted by dl123

I am looking to buy a cable and found this one http://www.ebay.com/itm/BMW-INPA-Edi...26ea00&vxp=mtr on ebay and would like to know if it will work to code my e60 bmw. Also i wanted to use my laptop to do the coding but when i go into device managers i dont see any ports, i dont have a com1 port on my laptop is there a way to figure something out or do i have to find a computer with a com1 port?? Thank you.

Originally Posted by Frenk

from what I see, the link you posted, it's a USB cable

It has a built-in USB to serial adapter. You need the drivers. Read the first post - I think it discusses this (or see the CD that cme ith your cable).

[dl123]

Ok so this cable off ebay will work for coding my e60, right??

[GenePoole]

Originally Posted by dl123

Ok so this cable off ebay will work for coding my e60, right??

It says it is the correct specs, but there's no guarantee that the cheap sweat-shop Chinese cables are actually going to work as they usually have little or no quality control or testing. Try it if you're willing to risk it. You'll wait 15-20 days to get it from Hong Kong, then another 15-20 days to ship it back if it doesn't work and hope the replacement they send you works, or just pay the little bit extra for a known good working tested and guaranteed cable like the one from One-Stop:

http://www.one-stop-electronics.com/shop/