[Blk07335i]

I have V2 and Terry's O2 sims but my C-Reader won't perform the test. If I knew someone with the right reader I would be willing to get them read.

[M3to335]

It has to be V3. The purpose is to verify that V3s internall O2 and Catalyst readiness simulation is working with catless DPs across the board.

[brusso]

Sorry man not that many people have the v3 yet let alone a code reader.... I have a v3 and catless dp's but no code reader. If you can get someone with a code reader in so cal to check my set up you are more than welcome. All the shops are closed today ...... I hate to see you have to pull the dp's and then reinstall them.
let me know.... why don't you pm Shiv..... ?

[M3to335]

He has been helping me out.

Well maybe tomorrow you can stop by Autozone or something? I would really appreciate it.

Interesting update- Just 2 minutes ago I completed my 3rd complete drive cycle (20min per cycle) Im getting pending codes P0138, P0158 and even saw a 238 once. Wtf.

[brusso]

I take it you don't have the pnp. It really sounds like you have a wiring problem to me.

[M3to335]

I have all the necessary wiring.

Still waiting on a response from someone....tick tock

[NPDAN]

BUMP BUMP come on, somebody help a brother out... I know if at least 10 (maybe 5) of you that got the V3 installed at Bimmerfest... Someone's gotta be able to do this...

[Blk07335i]

I wish I had V3...

[v2bling]

the update is gangster hard !!!! I couldnt even comprehend watching dustin putting that in my car.. Not sure what you can do on that one. Sorry for your troubles though. Did you do self install v3 upgrade ? See ya

[jpsimon]

hey m3to335, just sent you a PM

[brusso]

I will be at a shop first thing in the morning to have something checked out on my exhaust and will ask him to check the readiness of the 02's.....

[shyestsparks]

Shiv; I just sent an email regarding the V3 beta map. Thanks. (sorry for the thread jack).

[M3to335]

Originally Posted by jpsimon

hey m3to335, just sent you a PM

jp, I responded.

Originally Posted by brusso

I will be at a shop first thing in the morning to have something checked out on my exhaust and will ask him to check the readiness of the 02's.....

Brusso, thanks for the info. Please respond as soon as you get a chance. I may have to start ripping apart the car tonight which I am not very excited about doing.

Ok guys, there has to be more then just one of you out there.

[M3to335]

I got an extension on getting the emissions done. Im not giving up on getting a readiness signal on this G.D. car. Please someone chime in with your info.

[brusso]

I had my guy plug in his reader to the car this morning and we got a can not read message...... no faults however. I don't know what that means.... sorry it took so long to get back to you I forgot my phone today.

[M3to335]

Brusso, thanks for the feedback. Was he checking the readiness system (I/M monitors)? Also can you fill the rest out...

1) Do you have any systems “not ready” when you check the I/M monitor screen? If so, what? (can not read). "Can not read."
2) Assuming V3 was installed after the DP’s, your estimated miles driven since V3 install? ???
3) Vehicle build date ???
4) Any program updates you may have ???

[brusso]

1) Do you have any systems “not ready” when you check the I/M monitor screen? If so, what? (can not read). "Can not read."

I don't understand this question. I don't think the reader he used had a i/m monitor. The reader he used was very small. the screen was 3x3 inches at most and only showed one line of data. It started reading different systems then said can not read

2) Assuming V3 was installed after the DP’s, your estimated miles driven since V3 install? ???
My v3 was install before the dp's and I have driven 3-400 miles since the install.

3) Vehicle build date ??? 1/08
4) Any program updates you may have ???No updates since purchase
hope this helps

[M3to335]

Thanks.

Thats one out of how many out there? Anyone else?

[M3to335]

bump

[TheAcAvenger]

M3to335, i'm really sorry to inject your misfortune with my curiosity, but how did you manage to get V3 in NC?

[e90AW335i]

Originally Posted by TheAcAvenger

M3to335, i'm really sorry to inject your misfortune with my curiosity, but how did you manage to get V3 in NC?

Beta testing the o2 simm readiness for shiv I am guess.....

[M3to335]

Originally Posted by e90AW335i

Beta testing the o2 simm readiness for shiv I am guess.....

Beta testing yes. But I would like to know if Im the exception to the rule as far as readiness is concerned.

I called the state and got an extension on the emissions inspection. Unfortunately if I get pulled over its still a nice fat ticket.