Ar design oil catch can passenger side mount

Jake@MOTIV · 08-02-2010, 06:46 PM

I've had 3 direct injection cars. All three have had 1-2 catch cans on them. This can really is a sick setup. Thanks for this!

WOPALX · 08-04-2010, 12:11 AM

Bump for answer on the inlet / outlet question please.

FLA 335 · 08-04-2010, 12:52 AM

woplax... the arrow in the inside.. i believe that is where the connector farther to the front is routed, and the out (second connector with no writing on the OCC) is connected to the one closer to the firewall... hope someone can confirm this...!!!

WOPALX · 08-04-2010, 03:23 AM

Quote:

Originally Posted by FLA 335

woplax... the arrow in the inside.. i believe that is where the connector farther to the front is routed, and the out (second connector with no writing on the OCC) is connected to the one closer to the firewall... hope someone can confirm this...!!!

Yes that's what I'm seeking clarification on. If your looking at the engine from the front towards the firewall is the connector on the left the 'blowby out' and the connector on the right the 'blowby in'?

Or does it make no difference??

alextremo · 08-04-2010, 05:43 AM

It makes a difference - and you're correct. Left one is crankcase, goes to in on occ. Right one is intake, goes to out coupler.

nkw512 · 08-24-2010, 11:56 PM

Anyone with the new style catch can checked their oil level? I just checked mine after 1500 miles and it's bone dry? I did check to see if anything was leaking but i didn't find any. Thoughts?

Transport3r · 10-01-2010, 10:39 AM

Is there any new info about this? Has anyone collected oil with this can?
I'm going to buy an OCC soon, but I don't want to waste my money on one that will leak (RR) or one that doesn't catch anything.

IlChengis · 10-01-2010, 03:12 PM

Quote:

Originally Posted by joshuo

Is there any new info about this? Has anyone collected oil with this can?
I'm going to buy an OCC soon, but I don't want to waste my money on one that will leak (RR) or one that doesn't catch anything.

Hey Bud... if you give me a few more weeks I'm planning on posting a nice little HowTo with parts list to piece together a very nice sub-$150 OCC (made by 42DraftDesigns) and install instructions to go with it.

Wait before dropping almost $300 on the BSH or any other overpriced OCC, I think you won't regret it.

-Walter

E60orBust · 10-01-2010, 03:28 PM

Quote:

Originally Posted by Treppiede

Hey Bud... if you give me a few more weeks I'm planning on posting a nice little HowTo with parts list to piece together a very nice sub-$150 OCC (made by 42DraftDesigns) and install instructions to go with it.

I thought there already were sub $150 CC out there?

http://www.e90post.com/forums/showthread.php?t=353262
http://www.e90post.com/forums/showthread.php?t=426575
http://www.e90post.com/forums/showthread.php?t=420291

Transport3r · 10-01-2010, 07:55 PM

Quote:

Originally Posted by Treppiede

Hey Bud... if you give me a few more weeks I'm planning on posting a nice little HowTo with parts list to piece together a very nice sub-$150 OCC (made by 42DraftDesigns) and install instructions to go with it.

Wait before dropping almost $300 on the BSH or any other overpriced OCC, I think you won't regret it.

-Walter

Very nice! I love 42draft stuff (used to have a TT)
I'll wait a bit then. Their catch can looks nice. I guess you're trying to piece the additional hardware together to hook it up to out PCV system?

08-02-2010, 06:46 PM	#23
Jake@MOTIV Captain 86 Rep 949 Posts Drives: 135i, 335i Join Date: Dec 2009 Location: MD & NC iTrader: (7)	I've had 3 direct injection cars. All three have had 1-2 catch cans on them. This can really is a sick setup. Thanks for this!
	Appreciate 0 Quote

08-04-2010, 12:11 AM	#24
WOPALX Lieutenant Colonel 92 Rep 1,993 Posts Drives: 335i Sedan Join Date: May 2007 Location: Sydney, Australia iTrader: (2)	Bump for answer on the inlet / outlet question please. __________________ Vishnu PROcede V5 \| VK Motorworks FMIC \| AR Design OCC \| Forge DV's \| Bilstein PSS9 \| M3 Lower Control Arms & Caster Rods \| Quaife LSD \| HiTech Exhaust \| BMW Performance Illuminated Door Sills \| BMW Performance Gear Selector & Boot \| BMW Performance E-Brake Cover
	Appreciate 0 Quote

08-04-2010, 12:52 AM	#25
FLA 335 Captain 25 Rep 746 Posts Drives: 2009 335i (SOLD) !!!!! Join Date: Sep 2009 Location: Miami Fl iTrader: (7)	woplax... the arrow in the inside.. i believe that is where the connector farther to the front is routed, and the out (second connector with no writing on the OCC) is connected to the one closer to the firewall... hope someone can confirm this...!!! __________________ 2009 BMW 335i Sedan / Auto / Paddles / Sport / BMW Assist / Heated seats / JB Matte Black Grill / Tischer First Aid Kit w\Triangle / Tischer Hood Pad / "Custom" rear fog switch <---- SOLD!!!!
	Appreciate 0 Quote

08-04-2010, 05:43 AM	#27
alextremo Captain 51 Rep 966 Posts Drives: F10 550i Join Date: Sep 2008 Location: USA iTrader: (5)	It makes a difference - and you're correct. Left one is crankcase, goes to in on occ. Right one is intake, goes to out coupler.
	Appreciate 0 Quote

08-24-2010, 11:56 PM	#28
nkw512 Private 5 Rep 77 Posts Drives: 09 335i Coupe Join Date: Jun 2009 Location: Chicago Illinois iTrader: (6)	Anyone with the new style catch can checked their oil level? I just checked mine after 1500 miles and it's bone dry? I did check to see if anything was leaking but i didn't find any. Thoughts?
	Appreciate 0 Quote

10-01-2010, 10:39 AM	#29
Transport3r Major 87 Rep 1,262 Posts Drives: 2011 N55 E90 Join Date: Sep 2010 Location: Melbourne, FL iTrader: (4)	Is there any new info about this? Has anyone collected oil with this can? I'm going to buy an OCC soon, but I don't want to waste my money on one that will leak (RR) or one that doesn't catch anything.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search