Over 3000 miles trip mega FBO in 10 days with a stop at the NurburgsRing

enrita · 05-03-2011, 03:36 PM

yes i have the stoptech lines.
i actually just got in touch with STATIS and they have the following pads available. which one would you guys recommend? The SBS are not longer available. I probably need some new rotors as well since they got eaten up bad.... I do have a set of Ferodo DS 2500 home as well.. Might put those on first since the squeling is killing me haha

CarbotechT XP10T (1110T)
When Carbotech unleashed the XP10T to the general public, and it was an instant success, gathering multiple regional, divisional, and national championships. The XP10T is a very high initial bite friction material, with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1650°F. Due to the high level of friction and bite, this material is recommended for cars weighing around 2,000lbs or more, not including formula cars and cars with brake bias bars weighing less than 2,000lbs. This is the preferred compound for the front of Spec Miata racers, SSC,SSB, T3, SRF, ITS, ITE, H1,H2, H3, H4, 944 Cup, ST, GS, Factory Five Cobra's and many more Grand-Am/ALMS/SCCA/NASA classes. XP10T is also ideal for advanced/instructor level HPDE drivers. XP10T still maintains the highly praised release and excellent modulation, rotor friendliness, and 100% non-corrosive dust that have made all Carbotech compounds so successful. XP10T is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise.

CarbotechT XP12T (1112T)
The latest iteration of the highly successful XPT series of compounds with an extremely high initial bite, torque and fade resistance than compound XP10T. XP12T is a world leading friction compound that is unmatched as a Ceramic racing compound, with a temperature range of 250°F to 2000°F+. The XP12T still has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12T is the most rotor aggressive compound Carbotech offers, but compared to the competition the XP12T is still very rotor friendly and contains 100% non-corrosive dust. XP12T is recommended only for expert/very advanced drivers. XP12T is found to be most affective on race cars weighing 2,400lbs or more using R-Compound tires; or street cars weighing 3,200lbs or more for track use only. Ideal for LMP1, LMP2, DP, T1, T2, T3, H1, H2, GT1, GT2, GT3, TC, GT, ST, GS, MX-5 Cup, etc. XP12T is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise

Hisam135i · 05-03-2011, 03:43 PM

great story

Aridk · 05-03-2011, 03:59 PM

Tough call bay´em both and switch pads before a track day, no def. go with the xp 12t

Moodist · 05-03-2011, 05:04 PM

Great story, glad your car is running the way you expect it. Like everyone else, I am jealous and would love to have the opportunity.

Bagelfast · 05-03-2011, 07:10 PM

Very nice write up, i wish i was with my 335i in europe with u.

Fernflex · 05-04-2011, 04:28 PM

I wish I was there, nice story!

Btw: check out Stett oil cooler kit this kit completely removes oem oil thermostat, I have stage 1 without thermostat and in the street it doesn't go over 220 the stage oil cooler is twice the size of mine and you can order 180 in line thermostat!

enrita · 05-04-2011, 04:32 PM

Quote:

Originally Posted by Fernflex

I wish I was there, nice story!

Btw: check out Stett oil cooler kit this kit completely removes oem oil thermostat, I have stage 1 without thermostat and in the street it doesn't go over 220 the stage oil cooler is twice the size of mine and you can order 180 in line thermostat!

my shop can do a thermostat delete as well without problems. They actually sell one.
The main issue i have is the water temps also mainly related to the AT trans heat exchanger. holding 125 C oil temp after 2 laps at the ring with 25-26 C outside is good enough for me in respect to oil temp.

Fernflex · 05-05-2011, 09:07 AM

Try adding the second radiator that goes in the driver side of the car, I think is the one 335is had or maybe you can find somebody to code your ecu and use the 335is radiator fan that is better than the one we have!

enrita · 05-05-2011, 09:26 AM

Quote:

Originally Posted by Fernflex

Try adding the second radiator that goes in the driver side of the car, I think is the one 335is had or maybe you can find somebody to code your ecu and use the 335is radiator fan that is better than the one we have!

i have already the AR oil cooler in that spot. IMHO if i split the heatexchanger AT trans from the water cooling it should be enough.

Mr. 5 · 05-05-2011, 09:30 AM

You only did 185? You suck!

xxp0loxx · 05-05-2011, 09:38 AM

going to the Nürburgring is a treat in itself, even if you dont get on the track.

enrita · 05-05-2011, 09:42 AM

Quote:

Originally Posted by Mr. 5

You only did 185? You suck!

give me some time and will beat your record easily

**335i** · 05-05-2011, 09:44 AM

nice and well performed car

TurboBimmer · 05-05-2011, 09:50 AM

Quote:

Originally Posted by enrita

i have already the AR oil cooler in that spot. IMHO if i split the heatexchanger AT trans from the water cooling it should be enough.

The AR cooler could be moved in front of the radiator so that you can install the Performance Power Kit radiator on the driver side. I plan to go that route this summer.

Looking forward to your findings on an AT cooler

**335i** · 05-05-2011, 10:04 AM

Quote:

Originally Posted by Autobahn335i

The AR cooler could be moved in front of the radiator so that you can install the Performance Power Kit radiator on the driver side. I plan to go that route this summer.

Looking forward to your findings on an AT cooler

+1
sorry for OT enrita, but ar oc can be fitted in front of a radiator and all air goes from kidney grilles directly into oc

enrita · 05-05-2011, 10:08 AM

Quote:

Originally Posted by **335i**

+1
sorry for OT enrita, but ar oc can be fitted in front of a radiator and all air goes from kidney grilles directly into oc

i have the first version of the OC , i think is too thick to fit in front of the radiator. I am not moving that one . Best is to fit a TRANS AT OC somewhere IMHO

Mr. 5 · 05-05-2011, 11:03 AM

Quote:

Originally Posted by enrita

give me some time and will beat your record easily

You already did.
I only hit 180.1.
I suck too.

enrita · 05-05-2011, 11:29 AM

Quote:

Originally Posted by Mr. 5

You already did.
I only hit 180.1.
I suck too.

LOL, I suck because i only did max around 150, my goal was 185-190 but i could not push it that high because of the eastern traffic ;-) next time :-)
You gotta do it right and safely

G.I.Joe · 05-05-2011, 11:59 AM

Quote:

Originally Posted by enrita

LOL, I suck because i only did max around 150, my goal was 185-190 but i could not push it that high because of the eastern traffic ;-) next time :-)
You gotta do it right and safely

I suck too then, I only did 175 mph in the days just before Easter

There simply wasn't enough room on the autobahn anywhere to drive any faster. At those speeds you have to have all lanes well ahead of you completey free from other any traffic I think. Next time I drive to Berlin from Rostock on a friday evening, I will give the 300 km/h (~186 mph) mark a go, there's usually not much traffic around 10 pm anyway, and there are long straight parts.

enrita · 05-08-2011, 08:58 AM

Nice picture when i run 6 laps on Misano track in Italy

R1000K3 · 05-08-2011, 09:14 AM

What a fantastic event Enrico, thanks for sharing. I may go there myself later this year but am not sure when since I'm ill at the moment. Good to hear your car finally runs great and reliable

**335i** · 05-08-2011, 10:35 AM

Quote:

Originally Posted by enrita

Nice picture when i run 6 laps on Misano track in Italy

nice car

05-03-2011, 03:36 PM	#23
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	yes i have the stoptech lines. i actually just got in touch with STATIS and they have the following pads available. which one would you guys recommend? The SBS are not longer available. I probably need some new rotors as well since they got eaten up bad.... I do have a set of Ferodo DS 2500 home as well.. Might put those on first since the squeling is killing me haha CarbotechT XP10T (1110T) When Carbotech unleashed the XP10T to the general public, and it was an instant success, gathering multiple regional, divisional, and national championships. The XP10T is a very high initial bite friction material, with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1650°F. Due to the high level of friction and bite, this material is recommended for cars weighing around 2,000lbs or more, not including formula cars and cars with brake bias bars weighing less than 2,000lbs. This is the preferred compound for the front of Spec Miata racers, SSC,SSB, T3, SRF, ITS, ITE, H1,H2, H3, H4, 944 Cup, ST, GS, Factory Five Cobra's and many more Grand-Am/ALMS/SCCA/NASA classes. XP10T is also ideal for advanced/instructor level HPDE drivers. XP10T still maintains the highly praised release and excellent modulation, rotor friendliness, and 100% non-corrosive dust that have made all Carbotech compounds so successful. XP10T is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. CarbotechT XP12T (1112T) The latest iteration of the highly successful XPT series of compounds with an extremely high initial bite, torque and fade resistance than compound XP10T. XP12T is a world leading friction compound that is unmatched as a Ceramic racing compound, with a temperature range of 250°F to 2000°F+. The XP12T still has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12T is the most rotor aggressive compound Carbotech offers, but compared to the competition the XP12T is still very rotor friendly and contains 100% non-corrosive dust. XP12T is recommended only for expert/very advanced drivers. XP12T is found to be most affective on race cars weighing 2,400lbs or more using R-Compound tires; or street cars weighing 3,200lbs or more for track use only. Ideal for LMP1, LMP2, DP, T1, T2, T3, H1, H2, GT1, GT2, GT3, TC, GT, ST, GS, MX-5 Cup, etc. XP12T is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade Last edited by enrita; 05-03-2011 at 03:48 PM..
	Appreciate 0 Quote

05-03-2011, 03:43 PM	#24
Hisam135i Major 55 Rep 1,166 Posts Drives: 335i Join Date: Dec 2010 Location: Irvine, CA iTrader: (0)	great story __________________ 2008 Monaco Blue 335i \| Terracotta \| Premium \| Auto \| Comfort Access \| Matte-black Grills \| Carbon Fiber Splitters \| 20% Tint \| 1- point E9x Picture Game \| Staggered 19' VMR V701 \| Legal Disclaimer: My posts on this website cannot be held against me in any issues, such as warranty claims. \|
	Appreciate 0 Quote

05-03-2011, 03:59 PM	#25
Aridk Lieutenant 7 Rep 520 Posts Drives: 335i Join Date: Jan 2008 Location: Denmark iTrader: (0)	Tough call bay´em both and switch pads before a track day, no def. go with the xp 12t
	Appreciate 0 Quote

05-03-2011, 05:04 PM	#26
Moodist Private 14 Rep 94 Posts Drives: 335i Join Date: Oct 2010 Location: Philadelphia iTrader: (6)	Great story, glad your car is running the way you expect it. Like everyone else, I am jealous and would love to have the opportunity.
	Appreciate 0 Quote

05-03-2011, 07:10 PM	#27
Bagelfast Lieutenant Colonel 133 Rep 1,548 Posts Drives: BMW Join Date: Sep 2008 Location: USA iTrader: (0)	Very nice write up, i wish i was with my 335i in europe with u.
	Appreciate 0 Quote

05-04-2011, 04:28 PM	#28
Fernflex First Lieutenant 49 Rep 334 Posts Drives: E92 Crimson Red 335i Join Date: Oct 2009 Location: Guaynabo iTrader: (9)	I wish I was there, nice story! Btw: check out Stett oil cooler kit this kit completely removes oem oil thermostat, I have stage 1 without thermostat and in the street it doesn't go over 220 the stage oil cooler is twice the size of mine and you can order 180 in line thermostat! __________________ R56 Cooper S E92 335i E30 332is Burger Tuning, Evolution Racewerks and VRFS in Puerto Rico...
	Appreciate 0 Quote

05-05-2011, 09:07 AM	#30
Fernflex First Lieutenant 49 Rep 334 Posts Drives: E92 Crimson Red 335i Join Date: Oct 2009 Location: Guaynabo iTrader: (9)	Try adding the second radiator that goes in the driver side of the car, I think is the one 335is had or maybe you can find somebody to code your ecu and use the 335is radiator fan that is better than the one we have! __________________ R56 Cooper S E92 335i E30 332is Burger Tuning, Evolution Racewerks and VRFS in Puerto Rico...
	Appreciate 0 Quote

05-05-2011, 09:30 AM	#32
Mr. 5 Modder Raider 802 Rep 8,633 Posts Drives: M3 Join Date: Apr 2007 Location: Surf City, HB iTrader: (31) Garage List 2007 e90 335i [8.00]	You only did 185? You suck! __________________ e36 M3 Coupe, e36 325i Sedan e90 335i--SOLD Best 60-130-------------9.15 Seconds------------------WWW.MR5RACING.COM
	Appreciate 0 Quote

05-05-2011, 09:38 AM	#33
xxp0loxx Second Lieutenant 18 Rep 254 Posts Drives: e92 Space Gray ACS Join Date: Aug 2010 Location: Germany iTrader: (2)	going to the Nürburgring is a treat in itself, even if you dont get on the track. __________________
	Appreciate 0 Quote

05-05-2011, 09:44 AM	#35
335i Colonel 188 Rep 2,320 Posts Drives: TOYOTA & 2008 E92 335i 6MT Join Date: Jul 2007 Location: Swiss iTrader: (4) Garage List 2008 335i [9.00]	nice and well performed car __________________ E92 335i Black Saphire 6MT PROcede V5, BMS DCI, Big Tom IC, AR CL-DP's 3", AR Design OC, Forge DV's, OEM M3 side skirts, BMW Performance Wheels 19 inch 269 Black Gloss+Continental ContiSportContact 5P (400hp and 550nm) https://www.youtube.com/user/aistis7..._as=subscriber
	Appreciate 0 Quote

05-08-2011, 08:58 AM	#42
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	Nice picture when i run 6 laps on Misano track in Italy Attached Images __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

05-08-2011, 09:14 AM	#43
R1000K3 Major 58 Rep 1,311 Posts Drives: 335i MT Join Date: Jul 2009 Location: USA iTrader: (0)	What a fantastic event Enrico, thanks for sharing. I may go there myself later this year but am not sure when since I'm ill at the moment. Good to hear your car finally runs great and reliable
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search