Active Autowerke Programmed Xede Processor Updates

Ryan(e92) · 06-04-2007, 04:26 PM

Are you developing downpipes? If so when will they be available?

Jean@ActiveAutowerke · 06-04-2007, 04:31 PM

Quote:

Originally Posted by sajakh

What about free updates for the life of the product?

And do we have to send them in for software upgrades?

Is this harness and Xede transferrable to other N54 engines in other models (535, 135

, etc)?

Thanks in advance

Updates are free, however upgrades are not.

You will be able to load software updates/upgrades your self.

We are currently testing our Active Autowerke programmed Xede on a 535 at the moment. We will release more info soon.

Neema · 06-04-2007, 05:57 PM

Waited over 2 months for PROcede and then finally cancelled.........Now I cant wait to get AA's XEDE! I trust AA to be a pretty good buy judging by the fact that they have sooo much experience with BMW's.

droptop335 · 06-04-2007, 06:27 PM

Quote:

Originally Posted by Active Autowerke II

Well done..

Ander · 06-04-2007, 06:53 PM

Does catback and BOV void the warranty?

What kind of performance would we be looking at with XEDE only?

What value does the BOV introduce? i.e. I've read that they do not enhance performance and really only good to enhance the sound of the engine.

Do you folks recommend/perform the CDV mod for 6 speeds? If so, how much?

On your dyno results, how do we convert the speed x-axis to rpm?

Thanks.

gIzzE · 06-05-2007, 08:05 AM

Well I have to say I am more a fan of ECU remapping, I have always done it this way and on the two occasions I have had add on boxes I have been disapointed, however I put my AA Xede in yesterday and I am delighted with the results, just driving round normally you would think the car was stock, if anything it actually seems a little smoother, then from 2500rpm or there abouts things start to get real interesting.

A very, very impressive product. I am in the UK and have posted my findings up on the UK forums, so if you get any UK orders coming through make sure you look after them on shipping costs etc. There are a few interested parties already.

Omar@ActiveAutowerke · 06-05-2007, 09:41 AM

Quote:

Originally Posted by Ander

Does catback and BOV void the warranty?

You warranty cannot be voided by these mods

Quote:

Originally Posted by Ander

What kind of performance would we be looking at with XEDE only?

The gains should be fairly similiar. I dont want to give an exact # but there are a couple members who have posted dynos with stock exhaust. Remember every car is a bit different. After maybe 10 back to back runs we notice that we are able to maintain the power with our exhaust system.

Quote:

Originally Posted by Ander

What value does the BOV introduce? i.e. I've read that they do not enhance performance and really only good to enhance the sound of the engine.

It is more of a cosmetic mod but technically it will be able to handle higher boost levels better later on. Not to mention the stock look and nice sound (some people dont agree and that is fine)

Quote:

Originally Posted by Ander

Do you folks recommend/perform the CDV mod for 6 speeds? If so, how much?

Yes, technically it should add to the lifetime of your clutch if you drive hard. It would probably be a .5-1 hr. labor. It is fairly simple, you just have to do a couple tedious things like bleed the clutch, etc..

Quote:

Originally Posted by Ander

On your dyno results, how do we convert the speed x-axis to rpm?

We have to do it. We will get it done later today when Jean gets in.

Omar@ActiveAutowerke · 06-05-2007, 09:46 AM

Quote:

Originally Posted by gIzzE

Well I have to say I am more a fan of ECU remapping, I have always done it this way and on the two occasions I have had add on boxes I have been disapointed, however I put my AA Xede in yesterday and I am delighted with the results, just driving round normally you would think the car was stock, if anything it actually seems a little smoother, then from 2500rpm or there abouts things start to get real interesting.

A very, very impressive product. I am in the UK and have posted my findings up on the UK forums, so if you get any UK orders coming through make sure you look after them on shipping costs etc. There are a few interested parties already.

Thanks you Sir. Enjoy.

Omar@ActiveAutowerke · 06-05-2007, 09:48 AM

Quote:

Originally Posted by Boost_Nation

Waited over 2 months for PROcede and then finally cancelled.........Now I cant wait to get AA's XEDE! I trust AA to be a pretty good buy judging by the fact that they have sooo much experience with BMW's.

Sorry about your previous experience. Your order shipped yesterday and you should have gotten a tracking # via email. If not contact us and we will get it for you.

Sleepr335 · 06-05-2007, 10:36 AM

Quote:

Originally Posted by Ander

.....What kind of performance would we be looking at with XEDE only?......

I have their Xede with no other mods. My results were 276whp stock and 323whp with Xede.

I wasn't able to get any torque readings.

Can someone please tell me what a "CDV" mod is and whats its purpose. Thank you.

schneid4323 · 06-05-2007, 10:37 AM

Quote:

Originally Posted by Sleepr335

Can someone please tell me what a "CDV" mod is and whats its purpose. Thank you.

1bade92 · 06-05-2007, 11:13 AM

Why no torque readings? Would love to see what you did on Xede alone...

HPIA4v2 · 06-05-2007, 03:49 PM

Quote:

We are currently testing our Active Autowerke programmed Xede on a 535 at the moment. We will release more info soon

That's what I want to hear, XEDE for 535i.
Are you expecting similar number on 535i?
Are you working on software for sport-auto trans, for more agressive shifting with this XEDE?
Wish I have 93 fuel but here 91 is as high as you can get.

jon@themshop · 06-05-2007, 03:51 PM

Quote:

Originally Posted by 1bade92

Why no torque readings? Would love to see what you did on Xede alone...

Dyno operator probably didn't hook up the tach clip to the spark plug wire.

Ander · 06-05-2007, 05:11 PM

Dyno over RPM?

Spool · 06-05-2007, 06:21 PM

At high elevations...will this unit throw a CEL?

I go up to the mountains on my spirit drive a lot, what will this do at high elevations? probably around 5000+ ft above sea level...

Jean@ActiveAutowerke · 06-06-2007, 09:54 AM

DrDomer · 06-06-2007, 10:07 AM

After seeing Shiv's dyno of the Procede V2.0... the above is now old news. You guys have some work to do again. Maybe there's a beta tester you can swindle...

Shiv's bringing the heat.

bimmerlex · 06-06-2007, 10:32 AM

Jean, just curious, any plans on keeping up the competition with Vishnu and release new maps for current Xede?

SfValley335i · 06-06-2007, 11:22 AM

Quote:

Originally Posted by bimmerlex

Jean, just curious, any plans on keeping up the competition with Vishnu and release new maps for current Xede?

give them time and im sure they'll release something with similar if not more hp/torq. This will go back and forth several times as its just competition.

epiphone3 · 06-06-2007, 11:36 AM

just be careful not to sacrifice quality/reliability for an extra bit of power.

Ado · 06-06-2007, 11:49 AM

This is now pretty old news since the PROcede will now get you 42+ more HP to the wheels then the XEDE

06-04-2007, 04:26 PM	#23
Ryan(e92) Captain 17 Rep 705 Posts Drives: SG M6 coupe Join Date: Oct 2006 Location: Newport Beach iTrader: (6)	Are you developing downpipes? If so when will they be available?
	Appreciate 0 Quote

06-04-2007, 05:57 PM	#25
Neema Major General 825 Rep 7,246 Posts Drives: a few BMWs Join Date: Dec 2006 Location: SoCal iTrader: (12)	Waited over 2 months for PROcede and then finally cancelled.........Now I cant wait to get AA's XEDE! I trust AA to be a pretty good buy judging by the fact that they have sooo much experience with BMW's.
	Appreciate 0 Quote

06-04-2007, 06:53 PM	#27
Ander Enlisted Member 6 Rep 46 Posts Drives: 2007 e90 335i Join Date: Apr 2007 Location: Florida iTrader: (0)	Does catback and BOV void the warranty? What kind of performance would we be looking at with XEDE only? What value does the BOV introduce? i.e. I've read that they do not enhance performance and really only good to enhance the sound of the engine. Do you folks recommend/perform the CDV mod for 6 speeds? If so, how much? On your dyno results, how do we convert the speed x-axis to rpm? Thanks.
	Appreciate 0 Quote

06-05-2007, 08:05 AM	#28
gIzzE Major General 361 Rep 5,985 Posts Drives: F11 + 997 Carrera S Join Date: Apr 2006 Location: Norfolk, UK. iTrader: (2)	Well I have to say I am more a fan of ECU remapping, I have always done it this way and on the two occasions I have had add on boxes I have been disapointed, however I put my AA Xede in yesterday and I am delighted with the results, just driving round normally you would think the car was stock, if anything it actually seems a little smoother, then from 2500rpm or there abouts things start to get real interesting. A very, very impressive product. I am in the UK and have posted my findings up on the UK forums, so if you get any UK orders coming through make sure you look after them on shipping costs etc. There are a few interested parties already.
	Appreciate 0 Quote

06-05-2007, 11:13 AM	#34
1bade92 Second Lieutenant 21 Rep 203 Posts Drives: Ultimate Driving Machine Join Date: May 2007 Location: . iTrader: (0)	Why no torque readings? Would love to see what you did on Xede alone...
	Appreciate 0 Quote

06-05-2007, 05:11 PM	#37
Ander Enlisted Member 6 Rep 46 Posts Drives: 2007 e90 335i Join Date: Apr 2007 Location: Florida iTrader: (0)	Dyno over RPM?
	Appreciate 0 Quote

06-05-2007, 06:21 PM	#38
Spool ****** 601 Rep 6,169 Posts Drives: A few Join Date: Apr 2007 Location: DC Metro iTrader: (24)	At high elevations...will this unit throw a CEL? I go up to the mountains on my spirit drive a lot, what will this do at high elevations? probably around 5000+ ft above sea level... __________________ MKIV 6spd 1000hp Club
	Appreciate 0 Quote

06-06-2007, 09:54 AM	#39
Jean@ActiveAutowerke Lieutenant 119 Rep 540 Posts Drives: 335 Join Date: Mar 2007 Location: Miami iTrader: (0)
	Appreciate 0 Quote

06-06-2007, 10:07 AM	#40
DrDomer Major 43 Rep 1,349 Posts Drives: 2004 330ci ZHP, 1999 Miata Join Date: Nov 2006 Location: Iowa iTrader: (0)	After seeing Shiv's dyno of the Procede V2.0... the above is now old news. You guys have some work to do again. Maybe there's a beta tester you can swindle... Shiv's bringing the heat. __________________ Any man who can drive safely while kissing a pretty girl is simply not giving the kiss the attention it deserves. ~Albert Einstein
	Appreciate 0 Quote

06-06-2007, 10:32 AM	#41
bimmerlex Captain 73 Rep 885 Posts Drives: 2024 BMW X4M Competition Join Date: Jan 2007 Location: SoCal. iTrader: (25) Garage List 2025 BMW X5 40i M-S ... [9.75] 2024 BMW X4M Compet ... [0.00]	Jean, just curious, any plans on keeping up the competition with Vishnu and release new maps for current Xede? __________________ 2025 BMW X5 Xdrive40i M-Sport 2024 BMW X4M Competition
	Appreciate 0 Quote

06-06-2007, 11:36 AM	#43
epiphone3 Lieutenant Colonel 121 Rep 1,772 Posts Drives: 2013 BMW X3 35i Join Date: Oct 2005 Location: Calgary iTrader: (0)	just be careful not to sacrifice quality/reliability for an extra bit of power.
	Appreciate 0 Quote

06-06-2007, 11:49 AM	#44
Ado King Kong 63 Rep 771 Posts Drives: E92 M3 Join Date: Nov 2006 Location: Toronto iTrader: (0)	This is now pretty old news since the PROcede will now get you 42+ more HP to the wheels then the XEDE __________________ 08 E92 M3 - AA ECU, AA Pulleys, AA Air Filter, AA Short Shifter - CURRENT E92 335i - Vishnu V3, Exhaust, Intake, BOV, CDV Delete - SOLD 1991 850i Dinan Twin Turbo - SOLD
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search