[E90PAT]

Can someone help here please

[E90PAT]

Originally Posted by Neutrino45

You guys are lucky!

E92PAT, when did you order yours? I order mine on 11/25 and tracking says it just left Hong Kong on the 8th...

Well i ordered Nov 25th as well. Might be stuck at some random customs check point. But you should be getting it very soon.

[DimSum]

Originally Posted by wpnx

Does anyone's COM advanced config screen look like mine?

Can't figure out if I put the right values in or not.

Cause your using the wrong driver, but if it works fine then it doesn't matter.

[wpnx]

Originally Posted by DimSum

Cause your using the wrong driver, but if it works fine then it doesn't matter.

Which driver should I be using? I chose the one in hardware/odb/usb2

[sroghen]

The experts, plz:

Do you know whether I can program (enable) the 6-CD Changer feature without actually having the device?

If so, can someone kindle share the coding required. Thx


(I am planning to install the Dension 500 Gateway which requires this feature enabled)

[GenePoole]

Originally Posted by sroghen

The experts, plz:

Do you know whether I can program (enable) the 6-CD Changer feature without actually having the device?

If so, can someone kindle share the coding required. Thx


(I am planning to install the Dension 500 Gateway which requires this feature enabled)

Yes, you can. I just did this myself with the Dension500. You just follow the VO guide:

http://hoxnet.com/ncs/NCS_Changing_t..._Order_CAS.pdf

and add $672 (6-CD changer option) to the VO. You may need to add +KMP3 too if you've got an older iDrive.

[DESI4life10]

Those that have done the halogen headlight to xenon headlight swap, have you tried coding it into the system as opposed to just disabling the cold checks etc?

Disabling the checks won't do much as the car still thinks the car has halogen lights. I was reading some post over at bimmerpost for older generation cars where they coded the car to tell it that xenons are installed.

They then disabled the self leveling feature. I think this is how the coding should be done and would be more oem style.

Has anyone tried it this way yet?

[itsbrokeagain]

Originally Posted by xxxjecxxx

search a few pages back, another member posted.

I saw the line of code posted, but he doesn't mention what module it's in.

I went through each and every one of them, opened up each module and crtl-f to find any matching words in the file. All of them did not have it.

[sroghen]

Originally Posted by GenePoole

Yes, you can. I just did this myself with the Dension500. You just follow the VO guide:

http://hoxnet.com/ncs/NCS_Changing_t..._Order_CAS.pdf

and add $672 (6-CD changer option) to the VO. You may need to add +KMP3 too if you've got an older iDrive.

thx u.

[issabmw]

xxxjecxxx is the man.

Thank you for this

[issabmw]

Bought the cable!



************************************************** ********
Reminder to the vendors making money off of this to donate donate donate to xxxjecxxx, you wouldn't be here if it weren't for him.

[DimSum]

Originally Posted by issabmw

Bought the cable!



************************************************** ********
Reminder to the vendors making money off of this to donate donate donate to xxxjecxxx, you wouldn't be here if it weren't for him.

I knew how to code even before xxxjecxxx posted this thread. I was already coding my car 5 months back...
It was much harder because you had not much information to work with and it wasn't simplified for me.

But yes, donate to xxxjecxxx for spending his time to teach you guys

[AW128i]

Originally Posted by 1QuikWS6

What would be the cats a$$ is if you could get the sunroof to close upon rain without the car ON or the rain sensing switch ON. That way if you leave the roof open during the day, and any time it starts to rain the roof would close instead of having to run out and close it manually.

For that to work the rain sensor would need to be connected to Battery Power instead of Ignition, and the wiper switch bypassed, which I don't see happening. So I guess the Auto Close with the fob will have to suffice for me...

This was possible on my VWs and Audis and yeah, it IS the cat's a$$. So sweet to never have to worry about leaving the roof open (tilted or slid back) and after 24 hours from when the car was locked, the roof would close by default (even if no rain had been detected). That was great in case you forgot the roof open and didn't drive the car for a while.

On another note, I'm intimately familiar with the Ross-Tech VCDS tool for VWs and Audis and I'm seriously considering going with the setup from this thread to be able to do some basic coding for my car.

I have a '08 1-series and I've seen in this thread that the software referenced in this thread will work. Do you pick 'E89' for the 1-series as well??

[AW128i]

Following the DIY and got to step 9 that talks about the COM1 port. Here's a screenshot and as you can see, I have no COM1 port. Any ideas? This is with Windows 7 32-bit, by the way.

[sroghen]

Originally Posted by GenePoole

Yes, you can. I just did this myself with the Dension500. You just follow the VO guide:

http://hoxnet.com/ncs/NCS_Changing_t..._Order_CAS.pdf

and add $672 (6-CD changer option) to the VO. You may need to add +KMP3 too if you've got an older iDrive.

• The last step in the pdf says '2nd control unit must be coded. The 1st ECU is CAS. What is the 2nd one?

• Anyone has a list of the VO definitions?

• What is the VO for OEM Alarm?

My car is 07 323i
Thx

[GenePoole]

Originally Posted by sroghen

• The last step in the pdf says '2nd control unit must be coded. The 1st ECU is CAS. What is the 2nd one?

• Anyone has a list of the VO definitions?

• What is the VO for OEM Alarm?

My car is 07 323i
Thx

1. FRM in my car. This should be in the list in like step 3 or 4 of the DIY guide.

2. See: http://forums.5series.net/topic/1060...g/page__st__15

3. $302

[E90PAT]

Originally Posted by E92PAT

Can someone help here please

any one? Running vista and ebay cables.

[pcmike]

E92PAT,

I think jaza has been following this thread and pretty much figured everything out. May want to send him a PM and maybe you two can meet up and get your system all figured out?

[wpnx]

Does anyone have the drivers that allow me to set the buffers and fifo? Mine don't.

[marconi118]

is it possible to code N54 335i injectors in DME module?

This operation is needed after replacing injectors in 335i N54 engine

[matrix76]

Originally Posted by AW128i

Following the DIY and got to step 9 that talks about the COM1 port. Here's a screenshot and as you can see, I have no COM1 port. Any ideas? This is with Windows 7 32-bit, by the way.

Plug your cable into your PC/Laptop and reopen the device manager, you should then see your port.

[spazticrecords]

You think it's possible to disable speed control volume? If so, does anyone know the value or which module this resides in?