Bavarian's Dom CF Splitters 220shipped + Group BUY!!

BavDom · 04-07-2007, 03:54 PM

Quote:

Originally Posted by 18LLC

there are some clear coat cracks near the holes. maybe cause by drilling. since i will repaint it, so i think it's okay. will show the pic later.

Might've been shipping, still,Let me know if anything.

18LLC · 04-07-2007, 09:49 PM

waiting for drying the glue. because there will be a meet in slo next week, i don't want my new paint get chip, so i will wait until the meet finish, then i will smooth it out and put the paint on. here are some pic for the splitter.

18LLC · 04-07-2007, 09:50 PM

more

Spazdoc · 04-07-2007, 11:12 PM

18LLC - I like the grille - did you remove the bars? Something is different...

just4kickz · 04-07-2007, 11:20 PM

Quote:

Originally Posted by Spazdoc

18LLC - I like the grille - did you remove the bars? Something is different...

yeah... i guess he did... i think he made his own mesh (spray painted the color of his liking). looks good!... i think i might take off those bars...

18LLC, you need some far-away shots! haha

BavDom · 04-08-2007, 12:19 AM

Quote:

Originally Posted by just4kickz

yeah... i guess he did... i think he made his own mesh (spray painted the color of his liking). looks good!... i think i might take off those bars...

18LLC, you need some far-away shots! haha

These are the bars we will be making in CF to match your BavDom splitters and BavDom grille!:rocks:

Spazdoc · 04-08-2007, 01:14 AM

Quote:

Originally Posted by Bavariansdom

These are the bars we will be making in CF to match your BavDom splitters and BavDom grille!:rocks:

But I think he removed the bars (I like it!)

Paul330d · 04-08-2007, 08:51 AM

They look good from a normal distance and the overall fit seems acceptable, but the finish of the splitter itself along some of the upper edges in the close-ups does not appear to be totally consistent or of OEM standard... or is this to be expected from 'copies'? I don't want to be an ass, but rule #1 when I buy stuff for my car is that it has to look OEM

BmwOwnsMe · 04-08-2007, 09:49 AM

Quote:

Originally Posted by Paul330d

They look good from a normal distance and the overall fit seems acceptable, but the finish of the splitter itself along some of the upper edges in the close-ups does not appear to be totally consistent or of OEM standard... or is this to be expected from 'copies'? I don't want to be an ass, but rule #1 when I buy stuff for my car is that it has to look OEM

Needs more 3m double tape or betalink on that side.

HyperM3 · 04-08-2007, 10:37 AM

Quote:

Originally Posted by Paul330d

They look good from a normal distance and the overall fit seems acceptable, but the finish of the splitter itself along some of the upper edges in the close-ups does not appear to be totally consistent or of OEM standard... or is this to be expected from 'copies'? I don't want to be an ass, but rule #1 when I buy stuff for my car is that it has to look OEM

When I was test fitting mine, I realized you had to start with the outside corner and slide it on working your way to the center of the bumper. Seems like this poster started from the inside of the bumper and worked his way outside. This wont line the splitters up correctly and youll get the gap you see in this pic.

Paul330d · 04-08-2007, 10:52 AM

^^ Good advice there, thanks.

Spazdoc · 04-08-2007, 12:05 PM

Quote:

Originally Posted by just4kickz

yeah... i guess he did... i think he made his own mesh (spray painted the color of his liking). looks good!... i think i might take off those bars...

18LLC, you need some far-away shots! haha

Where did the mesh come from??

BavDom · 04-08-2007, 02:45 PM

Quote:

Originally Posted by HyperM3

When I was test fitting mine, I realized you had to start with the outside corner and slide it on working your way to the center of the bumper. Seems like this poster started from the inside of the bumper and worked his way outside. This wont line the splitters up correctly and youll get the gap you see in this pic.

thank you HyperM3, you are right, even with the OEM it is important you start from the outside in or the splitter won't be installed properly and you will have a space like the one there.

ska///235i · 04-08-2007, 04:24 PM

someone do a BavDom splitters DIY with pics please..ahahahah

HyperM3 · 04-08-2007, 04:51 PM

Quote:

Originally Posted by ska

someone do a BavDom splitters DIY with pics please..ahahahah

Are you being serious? If so, Ill do it when I officially install mine.

BmwOwnsMe · 04-08-2007, 04:57 PM

Quote:

Originally Posted by HyperM3

Are you being serious? If so, Ill do it when I officially install mine.

Maybe you should because some people may install them with nails and a hammer...

HyperM3 · 04-08-2007, 05:00 PM

Quote:

Originally Posted by BmwOwnsMe

Maybe you should because some people may install them with nails and a hammer...

Even if youre being sarcastic, I wouldnt put it past some people. Ive learned to never underestimate the stupidity of humans.

just4kickz · 04-08-2007, 05:13 PM

Quote:

Originally Posted by Spazdoc

Where did the mesh come from??

i'm sure you just buy the mesh... its not anything special... look under the guy's started therads and you'll find what he did...

BavDom · 04-08-2007, 07:02 PM

Quote:

Originally Posted by BmwOwnsMe

Maybe you should because some people may install them with nails and a hammer...

cHaNkSta · 04-08-2007, 07:15 PM

Quote:

Originally Posted by HyperM3

Are you being serious? If so, Ill do it when I officially install mine.

yes please

just4kickz · 04-08-2007, 08:04 PM

chank! go pay homes

Spazdoc · 04-08-2007, 09:17 PM

Quote:

Originally Posted by BmwOwnsMe

Maybe you should because some people may install them with nails and a hammer...

Now that is stupid.

Hey, I just found matching blue zip ties at Home Depot to help install these things.

04-07-2007, 09:49 PM	#464
18LLC Major General 162 Rep 5,104 Posts Drives: e89 Join Date: Oct 2005 Location: California iTrader: (0)	waiting for drying the glue. because there will be a meet in slo next week, i don't want my new paint get chip, so i will wait until the meet finish, then i will smooth it out and put the paint on. here are some pic for the splitter. Attached Images __________________
	Appreciate 0

04-07-2007, 09:50 PM	#465
18LLC Major General 162 Rep 5,104 Posts Drives: e89 Join Date: Oct 2005 Location: California iTrader: (0)	more Attached Images __________________
	Appreciate 0

04-07-2007, 11:12 PM	#466
Spazdoc Major 44 Rep 1,219 Posts Drives: 2020 C63S, 2001 S4 Join Date: Jan 2007 Location: Earth iTrader: (9) Garage List 2007 335i [0.00]	18LLC - I like the grille - did you remove the bars? Something is different...
	Appreciate 0

04-08-2007, 08:51 AM	#470
Paul330d Torque junky 124 Rep 1,688 Posts Drives: Remapped e90 330d Join Date: Jan 2006 Location: France (UK expat) iTrader: (2) Garage List 2006 330d [0.00] 2005 Fiat Panda 4x4 [0.00]	They look good from a normal distance and the overall fit seems acceptable, but the finish of the splitter itself along some of the upper edges in the close-ups does not appear to be totally consistent or of OEM standard... or is this to be expected from 'copies'? I don't want to be an ass, but rule #1 when I buy stuff for my car is that it has to look OEM Attached Images __________________ www.greenkeepers.fr - spécialiste des tondeuses à gazon hélicoïdales atco qualcast ransomes lawnflite Last edited by Paul330d; 04-08-2007 at 10:51 AM..
	Appreciate 0

04-08-2007, 10:52 AM	#473
Paul330d Torque junky 124 Rep 1,688 Posts Drives: Remapped e90 330d Join Date: Jan 2006 Location: France (UK expat) iTrader: (2) Garage List 2006 330d [0.00] 2005 Fiat Panda 4x4 [0.00]	^^ Good advice there, thanks. __________________ www.greenkeepers.fr - spécialiste des tondeuses à gazon hélicoïdales atco qualcast ransomes lawnflite
	Appreciate 0

04-08-2007, 04:24 PM	#476
ska///235i ***** noob 1462 Rep 10,477 Posts Drives: 325xi>M235i>428GCx Mspor Join Date: Sep 2005 Location: Boston iTrader: (34) Garage List 2006 325xi [0.00]	someone do a BavDom splitters DIY with pics please..ahahahah __________________ 2006 325xi (Sold) 2014 M235I (Current) 2015 428xi Gran Coupe (STB)
	Appreciate 0

04-08-2007, 08:04 PM	#483
just4kickz boku no namae ha... 349 Rep 11,023 Posts Drives: 2006 BS 330i Join Date: Feb 2006 Location: S. Bay Area, CA + Newark, NJ + ChiCity + True Blue iTrader: (11) Garage List 2006 E90 330i [0.00]	chank! go pay homes __________________ looking for a PreLCI Black Sapphire e90 front bumper without license plate holes "Akimbo shotguns. Broken wrists anyone? And don't give me that 'it's just a game' bull**. Where the are my akimbo interventions then?! One scope on each eye mother**er!!"
	Appreciate 0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search