[MFKN3]

Ok, fitment is about 95%. Slight bulge around door hinge area (bolts issue?) and a couple mm short at the front is the main thing. My right side had a slight curve at the rear top corner which didn't align with the fender, but I jammed some tape behind it to hold it out. I had to dremel most the holes on the right side but left was good except for two holes. Photos to come within the next couple days.

All up, unless you are looking for faults,they look very very good to an untrained eye. There are a couple other things I would improve, but that is getting very picky. Install was a PITA but I would still recommend these to anyone considering purchase.

[MFKN3]

Ok, got to work and did a walk around the car. Have to admit they look close to perfect

[Frank@M-Force_Design]

Originally Posted by xsboost

Ok, got to work and did a walk around the car. Have to admit they look close to perfect

Post up some photos for us?

[MFKN3]

Here's a couple with my point and shoot canon.

Finally washed the car late this evening so keen to check the colour match tomorrow in the sun. The fit is pretty good and also love the new wheels

[**335i**]

Nice, but are those side skirts version3 now? fitment perfect?

[Psylight]

Is M-Force gonna supply the goddamn screws for the bulges or not???? jesus....

[gone]

Got my car to my body shop today to finally get these skirts installed after 4 months of trying to get them delivered (paid for them back in April). Shop told me, no way they will fit. 1 inch short on the front and 1 1/2 inch short on the back in width. I can drive down the road with either the top clips in and bottoms undone or visa versa. The front to back length on the skirts were good at least and paint looked great (black sapphire metallic). Left PM for Frank asking what M-Force Design plans to do for me now seeing as these were version 3 side skirts and Frank stated -
Quote-
E92 M3 side skirts: $570 Shipped
UPDATE: ETA for Version3: 12~14 days. If the new skirts does not fit right, or the installation is not as straight forward as OEM skirts, PAT WILL EAT THE SKIRTS ALL

Best regards,
Frank
-End quote
Was considering a rear spoiler and some CF parts from MFD but now not so sure. Sort of wish I had just paid my body shop to modify OEM BMW M3 skirts to fit now. Will update thread if and when I get a reply from MFD.

[s1cke92]

Originally Posted by shogrence

Got my car to my body shop today to finally get these skirts installed after 4 months of trying to get them delivered (paid for them back in April). Shop told me, no way they will fit. 1 inch short on the front and 1 1/2 inch short on the back in width. I can drive down the road with either the top clips in and bottoms undone or visa versa. The front to back length on the skirts were good at least and paint looked great (black sapphire metallic). Left PM for Frank asking what M-Force Design plans to do for me now seeing as these were version 3 side skirts and Frank stated -
Quote-
E92 M3 side skirts: $570 Shipped
UPDATE: ETA for Version3: 12~14 days. If the new skirts does not fit right, or the installation is not as straight forward as OEM skirts, PAT WILL EAT THE SKIRTS ALL

Best regards,
Frank
-End quote
Was considering a rear spoiler and some CF parts from MFD but now not so sure. Sort of wish I had just paid my body shop to modify OEM BMW M3 skirts to fit now. Will update thread if and when I get a reply from MFD.

i was gonna order these til i saw fiberglass and no good fitment.

and

you should of bought oem. i bought my modified ones from long tran unpainted cuz i was gettin my front painted down here anyways. i havent install them but as soon as i get the car back i can show you pic =] haha

[**335i**]

can somebody tell me are there many modifications need on oem m3 side skirts to fit on 335i?

[MFKN3]

Originally Posted by shogrence

Got my car to my body shop today to finally get these skirts installed after 4 months of trying to get them delivered (paid for them back in April). Shop told me, no way they will fit. 1 inch short on the front and 1 1/2 inch short on the back in width. I can drive down the road with either the top clips in and bottoms undone or visa versa. The front to back length on the skirts were good at least and paint looked great (black sapphire metallic). Left PM for Frank asking what M-Force Design plans to do for me now seeing as these were version 3 side skirts and Frank stated -
Quote-
E92 M3 side skirts: $570 Shipped
UPDATE: ETA for Version3: 12~14 days. If the new skirts does not fit right, or the installation is not as straight forward as OEM skirts, PAT WILL EAT THE SKIRTS ALL

Best regards,
Frank
-End quote
Was considering a rear spoiler and some CF parts from MFD but now not so sure. Sort of wish I had just paid my body shop to modify OEM BMW M3 skirts to fit now. Will update thread if and when I get a reply from MFD.

That's because you have to redrill some of the holes in the skirt. Get a dremel and do the install yourself

[ThorsHammer]

Originally Posted by xsboost

That's because you have to redrill some of the holes in the skirt. Get a dremel and do the install yourself

If it's not this, I'm sure M-Force will make it right.

Mine didn't fit either, and they're working now to fix it.

Have faith.

[gone]

Originally Posted by xsboost

That's because you have to redrill some of the holes in the skirt. Get a dremel and do the install yourself

Body shop told me there was not enough material to re-drill or extend the wholes because part is actually not wide enough by the 1 inch in front and 1 1/2 at the back. I am not any good at all with this stuff and that is why when MFD stated it was simple OEM style replacement I figured I was safe buying them, since I was taking them to pro's to install. I will jsut wait and see what MFD replies with. Just takes a while sometimes before I hear from them when I have PM'd during the last 4 months of this side skirt business.

[MyE92]

HOLD ON, The new ones are made of FIBERGLASS NOW?! That sucks...

[**335i**]

Originally Posted by MyE92

HOLD ON, The new ones are made of FIBERGLASS NOW?! That sucks...

what do u mean FIBERGLASS its bad material? so new 3 version side skirts will be made from FIBERGLASS? it can break easy then

[s1cke92]

Originally Posted by **335i**

can somebody tell me are there many modifications need on oem m3 side skirts to fit on 335i?

buy a modified one from long tran =]

[cn555ic]

Originally Posted by **335i**

what do u mean FIBERGLASS its bad material? so new 3 version side skirts will be made from FIBERGLASS? it can break easy then

Fiberglass is definitely not better than PUR, but for what it worth the version 3 material although fiberglass is much better than the version 2 material that they used (which was PUR). Fiberglass is not as flexible as PUR and there is very little play when installing them, but even though if it was PUR or FIB, if there was damage to them both will sustain casualties of war, but the fiberglass ones will sustain more because its more rigid than the PUR...

[shiggy]

Originally Posted by cn555ic

Fiberglass is definitely not better than PUR, but for what it worth the version 3 material although fiberglass is much better than the version 2 material that they used (which was PUR). Fiberglass is not as flexible as PUR and there is very little play when installing them, but even though if it was PUR or FIB, if there was damage to them both will sustain casualties of war, but the fiberglass ones will sustain more because its more rigid than the PUR...

fiberglass also has the tendency to shrink as well....not saying MFD's sideskirts have an issue...just saying fiberglass does...

[gone]

Heard back from MFD -
"Quote:
Originally Posted by Frank@M-Force_Design
Hi Carl:
Sorry for my late response.
I talked to our office, and they told me it's very unlikely that the skirts are short on where the bottom holes are supposed to be since all the skirts come from the same mold.
Anyhow, if it possible that you can take some photos of the skirts along with some measurement as shown in my picture?

Looking forward to hear from you again.
Regards,
Frank"

Here is how I replied

Frank,

I will get my body shop to take some pic's and measurements for you. Right off hand from them showing me where it was short, the actual amount of space on my skirts from the hole and the side is a lot shorter than the picture you have sent me. Where the hole actually needs to be on my skirts, they run out of material. I will send pic's and measurements as soon as they give me them. By the way what happened to the whole -

"E92 M3 side skirts: $570 Shipped
UPDATE: ETA for Version3: 12~14 days. If the new skirts does not fit right, or the installation is not as straight forward as OEM skirts, PAT WILL EAT THE SKIRTS ALL

Best regards,
Frank"

You all stated about these 3rd shipment skirts.

These 3rd shipment skirts I got, obviously are not "straight forward as OEM skirts" or you wouldn't have me taking up my body shops time to take pictures and measure them. The shop showed me how the OEM stock skirts lay right up a against the car and all the holes line up perfectly with no finagling at all. I will get the pic's and measurements ASAP.

Carl

[Frank@M-Force_Design]

Hi Carl:
I will be waiting for your pictures.
If indeed that the skirts you receive has the defect (short on the bottom), we will definitely replace them for you.

[MFKN3]

Went to a meet on Sunday and the M3 skirts got some positive feedback

[**335i**]

i still dont understand how you guys mforce sell skirts that not fits 100% ?

[MyE92]

Is Pat eating all these skirts?